Active Topics
-
[HOWTO] Comprehensive Firmware Flashing Guide for N9 (1,580)
to Nokia N9 / N950 by aspergerguy - 11 hrs, 41 mins ago -
Nokia N9-00 Prototype Build S1.12 (RM-680 codename "Dali") (250)
to Nokia N9 / N950 by en0s - 3 days, 8 hrs ago -
[Announce] Maebble - Pebble support for Maemo (118)
to Applications by glo-worm - 3 days, 20 hrs ago -
Possible to flash Leste to eMMC? (6)
to Maemo 7 / Leste by Eri - 4 days, 10 hrs ago - more...
|
2014-02-15
, 23:04
|
|
Posts: 9 |
Thanked: 7 times |
Joined on Jan 2014
@ Oxford, UK
|
#2
|
Cool, thanks for the info! 
I quickly computed a median over my discharge rate using
My Jolla typically consumes 0.245 Watt being mainly connected to a WiFi and <10h a week via an UMTS data link and used quite a bit for reading news, emails, facebook... So the 7.98Wh battery (2100mAh * 3.8V) should typically last for 32.5h (1.4 days) which is a bit shorter than I observed (2.5 days).
stefan
PS: Computing the mean using the awk command below does bias short intervals with a high consumption too strongly (I get 0.448 Watt) and would suggest that my battery lasts for only 17.8h which is not the case.
PPS: If you look for the smallest discharge rate you see 0.011 Watt in the history which would result in 725h (30 days) .
I quickly computed a median over my discharge rate usingCode:
grep discharging /var/lib/upower/history-rate-7.dat | sort -k2 | awk '{ a[i++]=$2; } END { print a[int(i/2)]; }'
stefanPS: Computing the mean using the awk command below does bias short intervals with a high consumption too strongly (I get 0.448 Watt) and would suggest that my battery lasts for only 17.8h which is not the case.
Code:
awk '{ if ($3 =="discharging") sum += $2 } END { if (NR > 0) print sum / NR }' < /var/lib/upower/history-rate-7.dat
Code:
grep discharging /var/lib/upower/history-rate-7.dat | sort -k2 | head
| The Following User Says Thank You to strahl For This Useful Post: | ||
|
|
2014-03-02
, 20:25
|
|
Posts: 29 |
Thanked: 43 times |
Joined on Mar 2014
|
#3
|
Hi,
you can check https://openrepos.net/content/radekp/battery-monitor for battery monitor application done by me.
It draws graph for charge_now values. Unfortunately the value refreshes quite seldom - so not very useful for short term measurements, but you will get pretty accurate graph e.g. if you manually refresh after a few hours.
Btw battery on my Jolla on 2G takes 7 days to discharge.
you can check https://openrepos.net/content/radekp/battery-monitor for battery monitor application done by me.
It draws graph for charge_now values. Unfortunately the value refreshes quite seldom - so not very useful for short term measurements, but you will get pretty accurate graph e.g. if you manually refresh after a few hours.
Btw battery on my Jolla on 2G takes 7 days to discharge.
|
|
2014-03-10
, 19:29
|
|
Posts: 61 |
Thanked: 75 times |
Joined on Sep 2012
@ Germany
|
#4
|
can you code a second screen based by 'history-charge-7.dat'?
i'm not a developer, so i can't support you...
i'm not a developer, so i can't support you...
|
|
2014-03-11
, 09:41
|
|
Posts: 29 |
Thanked: 43 times |
Joined on Mar 2014
|
#5
|
Yes, it should be possible, but no promises - depends if i'll have time
|
|
2014-10-27
, 11:26
|
|
Posts: 2 |
Thanked: 2 times |
Joined on Oct 2014
|
#7
|
It seems that with Sailfish 1.1.0.39 the files from /var/lib/upower are missing!
|
|
2014-10-27
, 11:50
|
|
Posts: 2 |
Thanked: 2 times |
Joined on Oct 2014
|
#8
|
In version 1.1.0.39 we can use files from:
/var/run/state/providers/upower/
and
/sys/class/power_supply/battery
(apparently there are the same files)
/var/run/state/providers/upower/
and
/sys/class/power_supply/battery
(apparently there are the same files)
| The Following 2 Users Say Thank You to marius_emil1 For This Useful Post: | ||
 |
| Tags |
| battery, sailfish, upower |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
All times are GMT. The time now is 04:04.
since update to 1.0.3.8 i noticed follow:
sailfish logged by it self battery-states located in: