Active Topics

 


Reply
Thread Tools
Posts: 10 | Thanked: 0 times | Joined on May 2011
#11
Hey guys same problem just happened to me. i tried switiching on wifi but it said error so i thought a simple restart will solve the problem. unfortunately that restarts didn't start.. just keeps vibrating and trying to switch on. any1 have a detailed outline of instructions? if any1 can elkp me through teamviewer etc it would be highly appreciated. currently have the phone sitting on charge going berzek,

now there is green writing on the screen saying MALFUNCTION DEVICE SHUTDOWN IN 10s
 
Posts: 7 | Thanked: 0 times | Joined on May 2011
#12
Originally Posted by Xagoln View Post
When powered off and in charging mode, the N900 actually boots linux (only bare essentials).

But the small USB icon seems to appear before that time, so I don't think a software config error can be the problem.

Take a look at these threads from other people who had similar problems and solved them:

http://sumoudou.org/0/6.html
http://talk.maemo.org/archive/index.php/t-68272.html

You don't even need to switch the N900 on to re-flash, it seems.
Xagoln, thanks for the reply...

In these cases, it is usually a low battery. In my case, the battery is fully charged, thus eliminating this possibility.
 
Posts: 289 | Thanked: 49 times | Joined on Jun 2010
#13
Try to remove the n900 driver from your computer and then try to pulg your n900 to your computer.

Hope this will help
 
Posts: 7 | Thanked: 0 times | Joined on May 2011
#14
Originally Posted by shardul View Post
Try to remove the n900 driver from your computer and then try to pulg your n900 to your computer.

Hope this will help
I've tried with a clean computer ...
Practically zero, and it was not.

Thank you for your interest.
 
Posts: 7 | Thanked: 0 times | Joined on May 2011
#15
no more? :/
 
Reply


 
Forum Jump


All times are GMT. The time now is 20:35.