thanks a million times karam for your hard work

applying the battery improvements
i really have a typical N900
after the patch and the tweaks
and now with the battery improvements
heh i will have more than perfect N900
thanks again

hi karam, how do i make sure that the patch is installed?

go to xterm

type

cd /dev/cgroup/cpu
ls

if there are files/folders in it, then the patch is successfully installed.

If you can't even cd to the directory, then no

alhamdulillah and thank you very much to all of you guys..,
at last i manage to (after reboot)
after typing
/home/user # cd /dev/cgroup/cpu

/dev/cgroup/cpu # (come out) but when type Is

/bin/sh: Is: not found
/dev/cgroup/cpu #

i guess i manage to apply the speedpatch even though i can't see any files, as mr karam says,

"anyway as long as the directory cgroup is created that means the patch has been successfuly applied"

tq again,

now i'll try to 'play' with battery improvement
but i think i am not playing with tweaks as it looks very complicated to me...

siduapuluh
try ls (with letter L) NOT i=I
you have probably pressed ls (with letter i instead of l)

1-)Just like everyone knows
Activate the smartreflex from qcpu app
to install qcpu

-----------------
sudo gainroot
-----------------
apt-get install qcpu
-----------------

after typing
/home/user # apt-get install qcpu
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package qcpu
/home/user #

what should i do? kindly guide


2-)swappolube VFS cache pressure trick>>>> i manage to install this,

ya mr Mohammad, tq

aah yes i've just checked that out
type

apt-get install qcpufreq

will correct it right now
and alhamdulillah for notifying me

qcpu is an overclocking gui with an option to enable smartreflex. very simple. using FAPMAN to download is easier if you're not familiar with it..

just type qcpufreq in fapman and you'll see the programme.

download, enable smartreflex, don't go over 805mhz and you should be fine

I however always recommend it IF you are familiar with handling leafpad/xterm

to do it via xterm instead