Active Topics

 


Page 4 of 4 « First 23 4
Reply
Thread Tools
michaaa62 is offline michaaa62
2011-10-09 , 08:25
Posts: 2,102 | Thanked: 1,937 times | Joined on Sep 2008 @ Berlin, Germany
#31
Try to boot into Maemo default kernel and reinstall kernel-power-bootimg. This should not touch multiboot setup.
 

The Following User Says Thank You to michaaa62 For This Useful Post:
tusharpatel123 is offline tusharpatel123
2011-10-09 , 08:39
Posts: 45 | Thanked: 9 times | Joined on May 2011 @ Mumbai
#32
The moment i start the phone it enters the Uboot. i am not able to access Multiboot option.
1) keeping the keyboard close it stucks at Starting Kernel ...
2) keeping the Keyboard open boots the phone in Meego
3) Keeping the keyboard open and interupting the Autoboot and than trying to load power kernel using "RUN NOLOBOOT" it stucks at starting Kernel ...
4) keeping the keyboard close and opening it immediately after it shows " Loading Kernel Image ... OK" ( as informed by fabry in his TRI-BOOT thread) again stuck at starting kernel ...

Originally Posted by michaaa62 View Post
Try to boot into Maemo default kernel and reinstall kernel-power-bootimg. This should not touch multiboot setup.
Last edited by tusharpatel123; 2011-10-09 at 08:48.
 
Fabry is offline Fabry
2011-10-12 , 01:19
Posts: 362 | Thanked: 426 times | Joined on Nov 2010 @ Italy, Lombardia
#33
Probably you have an N900 with HW revision greater than 2101.

My U-Boot is based on Matan's u-boot and this version, as told many times, has problems (i.e. hangs on starting kernel) with phones different from hw rev 2101

You can remove u-boot from your phone by flashing a normal (aka without u-boot) kernel, and only the kernel, with flasher-3.5 tool.

There are many guides which can show you the correct steps to follow
Last edited by Fabry; 2011-10-12 at 01:37.
 

The Following User Says Thank You to Fabry For This Useful Post:
Fabry is offline Fabry
2011-10-12 , 01:33
Posts: 362 | Thanked: 426 times | Joined on Nov 2010 @ Italy, Lombardia
#34
Originally Posted by tusharpatel123 View Post
This means i should stick with ur process as of now as thats stable right?
Yes if your phone is a rev 2101 keep on use my version until Pali will fix problems on his release.
Last edited by Fabry; 2011-10-12 at 01:35.
 

The Following User Says Thank You to Fabry For This Useful Post:
tusharpatel123 is offline tusharpatel123
2011-10-12 , 05:31
Posts: 45 | Thanked: 9 times | Joined on May 2011 @ Mumbai
#35
Originally Posted by Fabry View Post
Probably you have an N900 with HW revision greater than 2101.

My U-Boot is based on Matan's u-boot and this version, as told many times, has problems (i.e. hangs on starting kernel) with phones different from hw rev 2101

You can remove u-boot from your phone by flashing a normal (aka without u-boot) kernel, and only the kernel, with flasher-3.5 tool.

There are many guides which can show you the correct steps to follow
Yes My HW is 2204. i'll be flashing my device with Kernel only using the PR1.3 file

EDIT: I successfully flashed my phone and am back with NITDORID intact. I took time since i am using a Vista 64bit and the below option was the only option that worked.

Now will wait for the Pali's Uboot version to have TRI-BOOT on my phone.

http://talk.maemo.org/showpost.php?p...0&postcount=20
Last edited by tusharpatel123; 2011-10-12 at 16:44.
 
Fabry is offline Fabry
2011-10-12 , 19:41
Posts: 362 | Thanked: 426 times | Joined on Nov 2010 @ Italy, Lombardia
#36
Newer release of Pali's U-Boot published.

Unfortunately changelog not reports yet fixes for two known problems:
  • High power consumption
  • Incompatibility with HW Rev different from 2101 (as Matan's version)
 

The Following User Says Thank You to Fabry For This Useful Post:
tusharpatel123 is offline tusharpatel123
2011-10-13 , 15:44
Posts: 45 | Thanked: 9 times | Joined on May 2011 @ Mumbai
#37
Originally Posted by Fabry View Post
Newer release of Pali's U-Boot published.

Unfortunately changelog not reports yet fixes for two known problems:
  • High power consumption
  • Incompatibility with HW Rev different from 2101 (as Matan's version)
Hardluck for guys like me using HW 2204 will wait for the further release supporting other HW's
 
Fabry is offline Fabry
2011-10-13 , 16:50
Posts: 362 | Thanked: 426 times | Joined on Nov 2010 @ Italy, Lombardia
#38
Originally Posted by tusharpatel123 View Post
Hardluck for guys like me using HW 2204 will wait for the further release supporting other HW's
Pali tells that his latest version now supports hw 2204.
I have 2101 and I can't confirm this information, you should try yourself

But I can tell you that power consumption problem is present yet.
So it is usable only for 8-10 hours without recharge
Last edited by Fabry; 2011-10-13 at 16:56.
 
disappear is offline disappear
2011-12-16 , 14:38
Posts: 238 | Thanked: 131 times | Joined on May 2011 @ Bulgaria
#39
Hi to all.I am with kp49.After install multiboot i can't see the titan kernel,i try reinstall mltiboot,but no result.Then i remove multiboot and kernel-power-bootimg,and again installed them(bootimg and multiboot)but result was the same.I can't use this:
sudo gainroot
mv /boot/zImage-2.6.28.10-power48 /boot/mutiboot/vmlinuz-2.6.28.10-power48
cp /etc/multiboot.d/00-Maemo-2.6.28-omap1.item /etc/multiboot.d/01-Maemo-2.6.28.10-power48.item
because i no have "00-Maemo-2.6.28-omap1.item'' in that directory /etc/multiboot.d/.I try to copy from /lib/modules/omap1 to /etc/multiboot.d/,but again without success,i try also copy with winscp from /lib/modules/omap1 to /boot/ and /etc/multiboot.d/,again failed.Then i try with winscp to copy from /etc/multiboot.d/examples/omap1 to /boot/ but result it was i lose multiboot,of course i remove both(bootimg,multiboot) and solved problem,but is there any option when someone install mutiboot with kp49 to see both kernels(titan and kernel-power)
 
Reply
Page 4 of 4 « First 23 4

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 08:56.

Contact Us - Home - Archive - Top