Active Topics

 


Reply
Thread Tools
Posts: 51 | Thanked: 2 times | Joined on Mar 2011 @ India
#1
Even after flashing my N900 completely with the help from this link

http://wiki.maemo.org/Updating_the_t...ng_the_Flasher

The whole system did start new..leaving for my contacts,conversations and calendar. I wanted all this to be removed too. Is it not possible to remove this during the flash??
or is there any more hard reset to n900??
 
peterleinchen's Avatar
Posts: 4,118 | Thanked: 8,901 times | Joined on Aug 2010 @ Ruhrgebiet, Germany
#2
 

The Following User Says Thank You to peterleinchen For This Useful Post:
pusak gaoq's Avatar
Posts: 723 | Thanked: 519 times | Joined on Nov 2010 @ Kuching:Malaysia
#3
first of all use only one threads...no need to make a new one....

second... your should re-flash your eMMC first before you re-flash your fiasco images.... this will makes sure that you have a fresh clean device after re-flash....
__________________
My Phone Evolution : Nokia 3650-Nokia 6600-Nokia 6630-Motorola Rizr-Sony P1i-Nokia E63-Nokia X3-Samsung E980-Iphone 2G-Sony W595-Nokia E71-Nokia 5800-Nokia N900-HTC Hero-Xperia Mini Pro
 

The Following 2 Users Say Thank You to pusak gaoq For This Useful Post:
Posts: 51 | Thanked: 2 times | Joined on Mar 2011 @ India
#4
Originally Posted by pusak gaoq View Post
first of all use only one threads...no need to make a new one....

second... your should re-flash your eMMC first before you re-flash your fiasco images.... this will makes sure that you have a fresh clean device after re-flash....
I will make a note of it.
My question is i already have re-flashed my fiasco image and now if i re-flash emmc will it be a prob.??
 
Posts: 502 | Thanked: 366 times | Joined on Jun 2010 @ /dev/null
#5
No it should not be a problem so long as you flash it in the sequence provided by the wiki. If you flash the fiasco/combined before eMMC and you did not bother reflashing it again with fiasco/combined you may get some leftover junk.
__________________
 

The Following User Says Thank You to tuxsavvy For This Useful Post:
pusak gaoq's Avatar
Posts: 723 | Thanked: 519 times | Joined on Nov 2010 @ Kuching:Malaysia
#6
Originally Posted by abyn900 View Post
I will make a note of it.
My question is i already have re-flashed my fiasco image and now if i re-flash emmc will it be a prob.??
the best way (proper way) for a clean fresh device is to re-flash your eMMC first then your fiasco images...remember not to include parameter "-R" without the quote while flashing eMMC....
as for you already flash your fiasco i recommend you re-flash your eMMC first then re-flash your fiasco images again...
__________________
My Phone Evolution : Nokia 3650-Nokia 6600-Nokia 6630-Motorola Rizr-Sony P1i-Nokia E63-Nokia X3-Samsung E980-Iphone 2G-Sony W595-Nokia E71-Nokia 5800-Nokia N900-HTC Hero-Xperia Mini Pro
 

The Following User Says Thank You to pusak gaoq For This Useful Post:
Posts: 51 | Thanked: 2 times | Joined on Mar 2011 @ India
#7
Originally Posted by pusak gaoq View Post
the best way (proper way) for a clean fresh device is to re-flash your eMMC first then your fiasco images...remember not to include parameter "-R" without the quote while flashing eMMC....
as for you already flash your fiasco i recommend you re-flash your eMMC first then re-flash your fiasco images again...
Thanx a lot..I am gonna do this again !!!
 
Posts: 51 | Thanked: 2 times | Joined on Mar 2011 @ India
#8
Originally Posted by tuxsavvy View Post
No it should not be a problem so long as you flash it in the sequence provided by the wiki. If you flash the fiasco/combined before eMMC and you did not bother reflashing it again with fiasco/combined you may get some leftover junk.
yea i had the left over junk...so am gonna flash it again!!
Thanx a lot!!
 
Reply


 
Forum Jump


All times are GMT. The time now is 02:01.