Active Topics

 


Reply
Thread Tools
Posts: 70 | Thanked: 185 times | Joined on Feb 2010 @ UK
#111
Originally Posted by geohsia View Post
Can you confirm that both the exact same firmware version. Thx.
Both the first and second handsets report the same firmware version in the handsets: 10.2011.34-1_PR_001, so they should be the same.

Thanks
 

The Following User Says Thank You to caa For This Useful Post:
Posts: 3,319 | Thanked: 5,610 times | Joined on Aug 2008 @ Finland
#112
@People with randomly rebooting devices and developer mode enabled - could you send me a dmesg output right after a reboot ?
__________________
Blogging about mobile linux - The Penguin Moves!
Maintainer of PyQt (see introduction and docs), AppWatch, QuickBrownFox, etc
 

The Following 4 Users Say Thank You to attila77 For This Useful Post:
Posts: 25 | Thanked: 27 times | Joined on Oct 2009 @ Amsterdam
#113
This is the error from dmesg just before a reboot and the dmesg after the reboot:

http://paste.mononoke.nl/paste/view/11262597

Looks like the dmesg after reboot is just a clean startup from linux. (no data left in the buffer with the crash just before reboot.)
 

The Following 2 Users Say Thank You to trbs For This Useful Post:
Posts: 8 | Thanked: 8 times | Joined on Nov 2011
#114
I just shipped my phone back to handtec today. My phone started to reboot and freeze a lot since yesterday, at one point it deleted all of SMS, e-mails and contacts.

I'm so fed up with the issue, so I requested a refund instead of a replacement. I just can't imagine how can a product with full of bugs being released to the public. Bad NOKIA!!!!
 

The Following User Says Thank You to dubious_dog For This Useful Post:
Posts: 303 | Thanked: 175 times | Joined on Oct 2009 @ London UK
#115
Originally Posted by attila77 View Post
@People with randomly rebooting devices and developer mode enabled - could you send me a dmesg output right after a reboot ?
Here you go!

http://chris.intrepid.cx/n900/meego9-dmesg.txt
 

The Following 2 Users Say Thank You to cpitchford For This Useful Post:
Posts: 194 | Thanked: 127 times | Joined on Mar 2010 @ Manchester, UK
#116
I don't wish to muddy the water, but i noticed that there is an option to update/reload the phone software in PC Suite. File > Update phone software.

Is this not an easier option than flashing?
 

The Following User Says Thank You to jpfsn For This Useful Post:
Posts: 515 | Thanked: 259 times | Joined on Jan 2010
#117
Originally Posted by dubious_dog View Post
I'm so fed up with the issue, so I requested a refund instead of a replacement. I just can't imagine how can a product with full of bugs being released to the public. Bad NOKIA!!!!
This looks to be a hardware issue. It happens. Seems like the guys in Finland can't get a break. The phones from China don't seem to be having the reboot / crashing problems.
 
Posts: 106 | Thanked: 52 times | Joined on Mar 2010 @ Corfe Castle, Dorset, UK
#118
A sad day About to box my N9 up to send back to Handtec... I love the OS and the blackness of the amoled, but the crashes were getting too much. I will think about whether to spend my £575 elsewhere or save it into my 'N9' pot...

I disliked muchly the VKBD though...
 

The Following User Says Thank You to HughF_UK For This Useful Post:
Posts: 13 | Thanked: 7 times | Joined on Jul 2007 @ Wuppertal, Germany
#119
I'm also affected by recurring crashes, handset UI hangs and application
aborts. My N9 is a black 64 GB model bought in Germany, product code
seems 059J1V4 (taken from /home/user/MyDocs/capability.xml).

Nothing obvious in the syslog. In dmesg i've seen a number of SGX crashes but these do not necessarily correlate with hangs or reboots.

However, i've seen some ECC error messages in dmsg and i've been
wondering if other see the same:

[ 0.138793] onenand_wait: ECC error = 0x8888, addr1 0x52, addr8 0x80
[ 0.138824] mtdoops: read failure at 458752 (8 of 8 read), err -74
[ 0.139068] onenand_wait: ECC error = 0x8888, addr1 0x55, addr8 0x80
[ 0.139099] mtdoops: read failure at 851968 (8 of 8 read), err -74
[ 0.139190] mtdoops: ready 0, 30 (no erase)
[ 0.139221] mtdoops: Attached to MTD device 3

Previous dmesg output had less ECC errors and/or different addresses.
I've also seen other dmesg that has no ECC errors reported.

So i'm wondering if this ECC error indicates a hardware failure.
Does anyone affected by frequent crashes see ECC error messages
as well?
 

The Following 2 Users Say Thank You to mikemx For This Useful Post:
Posts: 724 | Thanked: 1,255 times | Joined on Nov 2007 @ Cambridge, UK
#120
I got my N9 from Handtec on Monday two weeks ago. Mine is working fine ... I haven't got dev mode enabled though.
 

The Following 2 Users Say Thank You to tswindell For This Useful Post:
Reply


 
Forum Jump


All times are GMT. The time now is 09:51.