Active Topics

 


Poll: Are you happy with N900 frame/hardware quality?
Poll Options
Are you happy with N900 frame/hardware quality?

Reply
Thread Tools
Posts: 193 | Thanked: 92 times | Joined on May 2010 @ galveston, tx
#71
My keyboard bezel now has that extra flex and an extra clunk sound effect while pressing keys h y u k l . space m n
Attached Images
 

Last edited by noipv4; 2010-07-15 at 07:26.
 
Posts: 204 | Thanked: 31 times | Joined on Mar 2010 @ Rochdale UK
#72
Mines level all the way accross no issues. Think the later build N900s have had the issue address with the keyboard? the bottom plastic line to be fair does move but i have to purposely try and move it for it to be an issue.

Just post the link up to the spare parts ordering website on here? might be worthwhile replacing the keyboard with a new one / or frame if they are cheap.

Might be good to just have a spare anyway i see these keyboards wearing out after a few years use !
__________________
A microprocessor is the most complex manufactured product on earth and the majority of you have one in your pocket. #Intel

Please follow me on Twitter

www.twitter.com/marcdixon
 
Posts: 54 | Thanked: 15 times | Joined on Jul 2010
#73
On mine the frame has no gap but makes clicking sounds when pressed after leaving the phone without use for a while. I noticed this right after unboxing the devise...I cant send it back to nokia for a few clicking sounds which are so infrequent, although they are because of the keyboards loose frame.
 
Posts: 86 | Thanked: 28 times | Joined on Jan 2010 @ That beer and prezels country in Europe -_-
#74
mine shows this gap, too.
according to the service manual the replacement procedure takes untightening the torque screws and levelling the keyboard cover (!! only the cover where the gap appears !!) slightly up until it snaps off.

it is held by clips. i think those are getting lose from normal use / force.
replacement part is about 9,99 €. i'll keep it this way and wait till it gets worse before i'll try to replace it. but it's good to know that it's only the cover and not the whole keyboard
 
totalizator's Avatar
Posts: 47 | Thanked: 118 times | Joined on Jan 2009 @ Krakow, POLAND
#75
Mine has a crack and I want to replace the keyboard frame. Can I do it without disassembling the device?
 
bingomion's Avatar
Posts: 528 | Thanked: 345 times | Joined on Aug 2010 @ MLB.AU
#76
Originally Posted by totalizator View Post
Mine has a crack and I want to replace the keyboard frame. Can I do it without disassembling the device?
I doubt it, you need to watch a video on youtube on how to take it apart
 
Reply

Tags
broken, gap, hardware, hardware keyboard, keyboard, keyboard problem, keyboard quality, keyboard surround, loose, n900, problem


 
Forum Jump


All times are GMT. The time now is 22:15.