Yes you are right... I managed.

I'm trying to compile it with scratchbox in order to get the gatchat program to be run on the n900.

When listing the interfaces available for the n900 modem the data connection interface is not available and I would like to try with the at command directly to see if it works.

TA

isimodem is the native driver for the N900.

So there is no way of using AT commands over it?

And is it possible to enable any other Interfaces? or they are not enabled because they are not available throught the isimodem - Phonet?

Thanks for you help.

Some progress on that?

I have to check it again because I have been quite busy with other issues but it seems it is possible to make it.

The command "pnatd" enables sending AT commands. It opens a serial port (I think it is a pts master/slave model). Then you can use this interface through any program to get/set thinks on the modem.

The AT commands set is defined by the 3GPP TS 27.005 and 27.007 specs, if I remember correctly.

Please keep us informed of any progress. I will try to do the same

It seems that meego n900 preview has ofono inside, and I saw a lot of commit on ofono related to the n900 modem, so it seems things are moving in that direction.

AFAIK, ofono will not work on N900 because dbus version 1.2 doesn't support file descriptors in method calls. So, you need to have dbus >=1.3 running on N900 in order to have ofono working.

bump, what's the latest?

Maybe it's a good time to upgrade dbus in CSSU in order to allow ofono development.

anyone made any progress in this area yet?