guylhem thanks for the link, ordered some to my collection

and there is a fuse in the USB, i know i blew mine when i was experimenting with an DIY battery powered charger and it was late at night and i did not check the polarity of the USB plug, i did not find a replacement fuse so i opted to use 2 strands of wire and soldered it in where i took the fuse out, and my USB have been working fine since then, but if i should experiment again i will check my connections 5 times....

I think your fuse is F5300 (2A) as mentionned in page 4 of the schematics. But I don't see if it is before or after J2061.

Any 2A SMD fuse should do (it may not be pretty, like too small or too big, but I don't have the part list so I can't check the reference)

$5 on ebay for 10:
http://www.ebay.com/itm/10pcs-Little...item4ab691b4e8

Those are too big, the problem i had was trying to find a small enough fuse, but it works now, nowhere near ideal, believe me i know, but it works.

And yes it was F5300

i'm interested in this. would love an update soon

Good job but battery for it?? 3000mah?? for example.

The small battery n900 is a big problem.

With gamming or wifi scaning faircrack or other things in two hours and little , batery empty

Good cover case but , battery is the problem forever.

The mugen is the best capacity but very expensive

NO the mugen is not the best, not even by a little bit, of course if you are thinking about the best capacity that you can buy then yes it is the best, but since i tested it i can say it is pure cr*p, really disappointing mAh (just over 2200mAh not even close to 2400mAh) and build quality is very questionable considering the HUGE price

I Think You're not aware of:
http://talk.maemo.org/showthread.php?t=65568
---

As for update - I'm quite busy recently, but slowly going ahead. I've received first, "testing" aluminum (not the one that will make final thing - current one is weaker and cheaper, just for testing purposes), but my Chinese CNC step motor driver - something like that:
http://www.aliexpress.com/product-gs...olesalers.html

...just burned out. No big deal, as I've expected it to happen (due to experience gained while building machine, I know that they're just wrong in design). I've immediately ordered self-made (by other DIY CNC user) *proper* driver board, that are known to work very well, and it should arrive soon.

I also promise to post some video/photos of machine working with new driver

/Estel

Do you think I could get a copy of your 3D model/drawings? I'm a machinist myself, and could probably make my own(I've got a real CNC mill at home, and access to a major production machine at work, plus $15K in software I can use in my off-hours.)
Also, I may be able to help - let me know.

Awesome!

I'm in, meaning: I'd also be interested in buying one.

Have you ever hear of the term SHUT UP AND TAKE MY MONEY.