Active Topics
|
2012-06-20
, 20:31
|
|
Posts: 191 |
Thanked: 415 times |
Joined on Jan 2012
|
#272
|
Originally Posted by int_ua
ok, I have checked that I have this one installed :-)
Currently the keyboard config is taken from kubuntu-mobile-n900-integration_0.1_all.deb
IDK how to fix the locale error yet, maybe try LC_ALL="en". Anyway, it's really very insignificant AFAIU.
UPDATE:
It just got past the acpid without any errors. Also, I've noticed an upstart upgrade during the dist-upgrade. Maybe try without dist-upgrade if the installation is broken.
Thanks for your help ;-)
Now let's try to boot this beast :-P
| The Following 3 Users Say Thank You to caveman For This Useful Post: | ||
|
|
2012-06-21
, 11:14
|
|
Posts: 191 |
Thanked: 415 times |
Joined on Jan 2012
|
#273
|
I had to make a small manual adjustment in the uSD after the install.sh script completed. My first partition was of type 83 instead of 0C, although it did contain a vfat filesystem, so I had to fix it by hand.
| The Following 3 Users Say Thank You to caveman For This Useful Post: | ||
|
|
2012-06-21
, 11:39
|
|
Posts: 72 |
Thanked: 157 times |
Joined on Oct 2011
@ Hungary
|
#274
|
Originally Posted by caveman
Can you provide me some inscructions on fixing SD-card since I have the same problem as you and the partitions also overlap each other.
I had to make a small manual adjustment in the uSD after the install.sh script completed. My first partition was of type 83 instead of 0C, although it did contain a vfat filesystem, so I had to fix it by hand.
|
|
2012-06-21
, 11:40
|
|
Posts: 191 |
Thanked: 415 times |
Joined on Jan 2012
|
#275
|
I tried booting ubuntu with u-boot-menu from http://talk.maemo.org/showthread.php?t=81613.
Three tries were made:
sdboot run sdboot from u-boot console. It complains about invalid uImage format, but loads the kernel. The kernel fails with
'mmc0: error -110 whilst initializing SD card'
mmc1 is recognized (internal MMC)
boot from vfat partition I used the following item file:
It says: 'Wrong Ramdisk Image format' and goes to u-boot console.
Kernel and uImage MD5:
boot from ext4 partition I used the following item file:
Kernel and uImage MD5:
Similar to the 'run sdboot' case. The kernel is loaded and fails with -110 on uSD.
This is the only uSD I have available, so I can not rule out a card problem.
Those are with the custom kernel. Is it worth trying with another kernel?
Three tries were made:
- run sdboot
- boot from vfat partition
- boot from ext4 partition
sdboot run sdboot from u-boot console. It complains about invalid uImage format, but loads the kernel. The kernel fails with
'mmc0: error -110 whilst initializing SD card'
mmc1 is recognized (internal MMC)
boot from vfat partition I used the following item file:
Code:
ITEM_NAME="ubuntu"
ITEM_KERNEL="uImage"
ITEM_INITRD="uInitrd"
ITEM_DEVICE="${EXT_CARD}p1"
ITEM_FSTYPE="vfat"
ITEM_CMDLINE="vram=12M omapfb.mode=dvi:1280x720MR-16@60 mpurate=\${mpurate} root=/dev/mmcblk0p3 fixrtc quiet splash"
Kernel and uImage MD5:
Code:
1d3342ca201408bc51289f53a5740eda /media/mmc1/uImage 3b5d3c7d207e37dceeedd301e35e2e58 /media/mmc1/uInitrd
Code:
ITEM_NAME="Ubuntu 12.04"
ITEM_KERNEL="uImage"
ITEM_DEVICE="${EXT_CARD}p3"
ITEM_FSTYPE="ext4"
ITEM_CMDLINE="root=/dev/mmcblk0p3 rootwait console=tty0 omapfb.vram=0:2M,1:2M,2:2M mtdoops.mtddev=2 nosplash elevator=noop panic=20"
ITEM_REUSEATAGS="1"
Code:
1d3342ca201408bc51289f53a5740eda /media/mmc1p3/uImage 3b5d3c7d207e37dceeedd301e35e2e58 /media/mmc1p3/uInitrd
This is the only uSD I have available, so I can not rule out a card problem.
Those are with the custom kernel. Is it worth trying with another kernel?
|
|
2012-06-21
, 11:46
|
|
Posts: 191 |
Thanked: 415 times |
Joined on Jan 2012
|
#276
|
Originally Posted by PanzerSajt
I placed the uSD inside the SD adapter and edited the partition table on the PC with cfdisk, where I have changed its type.
Can you provide me some inscructions on fixing SD-card since I have the same problem as you and the partitions also overlap each other.
If your partitions overlap it becomes trickier. If you know the correct start locations, you can delete the partition and recreate with the correct type, the same start location and correct size. But that will work only if the filesystem has the correct size inside the partition.
| The Following User Says Thank You to caveman For This Useful Post: | ||
|
|
2012-06-21
, 16:43
|
|
Posts: 58 |
Thanked: 197 times |
Joined on Apr 2012
|
#277
|
Originally Posted by caveman
uhm, I assume you do have u-boot combined with stock kernel. If you'd use kernel power you shouldn't get -110 errors while trying to load a kernel from sd.
I tried booting ubuntu with u-boot-menu from http://talk.maemo.org/showthread.php?t=81613.
...
Similar to the 'run sdboot' case. The kernel is loaded and fails with -110 on uSD.
This is the only uSD I have available, so I can not rule out a card problem.
Those are with the custom kernel. Is it worth trying with another kernel?
Explanation: some sdcards need the dto=14 patch enabled in kernel. stock kernel doesn't have it. so if stock kernel u-boot combi access sdcard you get -110 error. kernel-power, as far as I know, does have that patch enabled.
Last edited by unknown.obvious; 2012-06-21 at 16:51.
| The Following 3 Users Say Thank You to unknown.obvious For This Useful Post: | ||
|
|
2012-06-21
, 17:32
|
|
Posts: 191 |
Thanked: 415 times |
Joined on Jan 2012
|
#278
|
Originally Posted by unknown.obvious
Sorry, but I am not sure I followed. My N900 runs u-boot-menu with KP50, and I am trying to boot ubuntu from the uSD (from u-boot-menu) using your custom kernel. The kernel does load, but the boot fails with the -110 error when trying to mount the root partition on the uSD. You mean I should try to boot ubuntu with KP50?
uhm, I assume you do have u-boot combined with stock kernel. If you'd use kernel power you shouldn't get -110 errors while trying to load a kernel from sd.
Explanation: some sdcards need the dto=14 patch enabled in kernel. stock kernel doesn't have it. so if stock kernel u-boot combi access sdcard you get -110 error. kernel-power, as far as I know, does have that patch enabled.
|
|
2012-06-21
, 17:39
|
|
Posts: 58 |
Thanked: 197 times |
Joined on Apr 2012
|
#279
|
Originally Posted by caveman
If you flashed KP50 u-boot combi and still get a -110 error then either there is a bug in pali's u-boot or your sdcard is broken.
Sorry, but I am not sure I followed. My N900 runs u-boot-menu with KP50, and I am trying to boot ubuntu from the uSD (from u-boot-menu) using your custom kernel. The kernel does load, but the boot fails with the -110 error when trying to mount the root partition on the uSD. You mean I should try to boot ubuntu with KP50?
|
|
2012-06-21
, 19:32
|
|
Posts: 3,074 |
Thanked: 12,960 times |
Joined on Mar 2010
@ Sofia,Bulgaria
|
#280
|
Originally Posted by caveman
what u-boot is that?
Sorry, but I am not sure I followed. My N900 runs u-boot-menu with KP50, and I am trying to boot ubuntu from the uSD (from u-boot-menu) using your custom kernel. The kernel does load, but the boot fails with the -110 error when trying to mount the root partition on the uSD. You mean I should try to boot ubuntu with KP50?
__________________
Never fear. I is here.
720p video support on N900,SmartReflex on N900,Keyboard and mouse support on N900
Nothing is impossible - Stable thumb2 on n900
Community SSU developer
kernel-power developer and maintainer
Never fear. I is here.
720p video support on N900,SmartReflex on N900,Keyboard and mouse support on N900
Nothing is impossible - Stable thumb2 on n900
Community SSU developer
kernel-power developer and maintainer
I have atteched the scripts which are showing the outputs of these two sensors. Hope it will help someone.
Just rename the two files to accel.sh and ambient.sh and sudo chmod +x them. They just give you raw data from the sensors