also can you do a flasher -i

and post the output here it'll give some further information...

hi thedead1440 thanks bro now my n9 cant go beyond nokia logo and spanner logo at the screen and here is my flasher -i

C:\Program Files\Nokia\Flasher>flasher -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.0.49
Version of 'sw-release': DFL61_HARMATTAN_10.2011.34-1_PR_001
Success

ok you are on pr legacy 001 and using pr1.0 from the info posted...

have you ever enabled logging on your device?

also please re-download the fw files i think maybe cuz they are corrupted the issue is popping up...


Edit: you mentioned about the spanner logo did you enable rd mode on the n9 using cmd? if yes disable it please...

thanks yeah i enabled rd mode and am i using pr1.0 on navifirm which firmware can i download

ok i would advice to use the global firmware with no maps (you can download the maps later from your device), the product code is 059H2M6...make sure you download pr1.3 (40.2012.21.3)...

disable rd mode before flashing too...

thanks alot will get back to u afta i download and try bro will u b online after 3 hrs will do all that then post the result

sure just post back here...i will be around if not there are tons of people who can help you too

sorry my nokia n9 is 16gb and 059H2M6 is 64gb firmware is it ok to download that

ok for 16gb firmware the product code is 059J1Z5 or 059H2C5 no difference in whatever you choose..the colours don't matter as the colours are just to help in setting up the wallpaper...

after downloading the global firmware of 059J1Z5 n9 doesnt finish roootfs but when i boot the phone it display yellow triangle with warranty void etc here is the result in flasher please help if its hardware problem

C:\Program Files\Nokia\Flasher>flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEG
ACY_001-OEM1-958_ARM.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_10.2011.34-1_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 15596 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 93 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[_] cmt-2nd [init 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[_] kernel [writing 37 % 1024 / 2714 kB 3199 kB/s]
[_] rootfs [finishing 100 % 1024 / 1170282 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3240 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2398 kB/s]
[f] rootfs [finishing 0 % 2048 / 1170282 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcqFTT3b/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmcqFTT3b/mnt: No such file or dir
ectory
[Pipe 4] Finishing in error state with status 1
========================================

ERROR: Failed to flash images