Active Topics
-
The N900 is now 15 years old! (7)
to Nokia N900 by Danct12 - 22 hrs, 25 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 1 day, 17 hrs ago -
F(x)tec Pro1x (QWERTY) for sale (0)
to Buy & Sell by aln00000 - 4 days, 2 hrs ago - more...
|
2012-08-05
, 19:40
|
|
Posts: 6 |
Thanked: 0 times |
Joined on May 2012
|
#722
|
Originally Posted by Saturn
No, no odd characters in SSID that I've seen. I'm in the US. I've found weirdness in many different locations.
I have noticed there is an issue with selecting an AP that its name has accented letters. e.g. like ΄ or ¨ that some languages have (Scandinavian, French, Greek etc.)
Can it be this case?
If you look in the small info box (that shows the Name, MAC, Channel, etc.) if the name and MAC is from the one you want to select. If it is shown there, then you can be sure it will be those parameters that will be used.
OK, so I powered up My N900 so I could give you examples. I run Cleven, set up the drivers, set the scan to 20, and hold it out my windows. Oddly enough, in the WEP and WPA lists, every access point is doubled (It shows in the list twice). Never saw that before. The WPS list is normal. OK, from the WPS list, I select the first one, and the name, MAC, and CH don't change. I select one of the others, and it works. I again select the first one on the list, and it shows the previously selected one. The 4th one down the list does the same thing. The first one is only lower case letters, while the fourth has an upper case first letter, but the rest lowercase. They are both 5 characters long. There are a total of 11 AP's here. This isn't the problem I've been having, just what I observed from a quick check. I'll play with it more to see if I can replicate the issues, but it looks like Injection is working OK. OOPS. Spoke too soon. The IV's got to about 3900, and now the Authentication window is saying:
15:38:50 Sending Authentication Request (Open System) (ACK)
15:38:50 Got a Deauthentication Packet! (Waiting xx Seconds)
If I kill the Inject window, it authenticates within 15 seconds or so. If I don't kill it, it never re-authenticates.
|
|
2012-08-05
, 20:12
|
|
Posts: 6 |
Thanked: 0 times |
Joined on May 2012
|
#723
|
As a quick update, I did another scan, and now three AP's don't 'Activate' when clicked, the first two original ones, and a third one. I also noticed AP's with a space in the name get truncated after the space. So, 'Joe Blow' shows up as 'Joe' in the list. If I select it, the information below shows the full 'Joe Blow'.
 |
|
2012-08-06
, 05:37
|
|
Posts: 59 |
Thanked: 16 times |
Joined on Jan 2012
|
#724
|
Originally Posted by Empéror
well, all the dependencies are installed automatically, just make sure you have letest Kernel-Power and all extras- repositories enabled when you are installing Cleven
@the_envy: there are plenty to download files for dependencies and dont have much idea on it... can you make a link for what to download for one last favor...
P.S. i am glad that you help a noobie. Thank You, the_envy
cold anyone please explain me about WPS type of security, which appeared in latest version of Cleven?
| The Following User Says Thank You to the_envy For This Useful Post: | ||
|
|
2012-08-06
, 11:36
|
|
Posts: 93 |
Thanked: 18 times |
Joined on Oct 2011
@ Coimbatore, India
|
#725
|
Originally Posted by Saturn
Thanks Saturn. I have KP50. earlier cleven version was working properly. but accidentally w/o reading ur post I updated to this new version which will support only KP51 and above. i created a mess. pl let me know how to go back to my earlier version. thanks in advance. i am a noob using cleven.
Release of cleven 4.1-1 in extras-devel
This version (should be available in few minutes) expects (but do not enforce) KP51.
In short, provides proper support for reaver and wash through the release of pali.
All previous workarounds that required to compile and copy the binaries is not needed any more.
To casual users: Please allow people with more experience to test it first before you upgrade. I have not tested it with all possible combinations and the major changes might break your system. Recommended is to use the version in stable repository or if you feel adventurous the testing repository.
Changes:
- NEW: Added dependency to the newly distributed reaver package.
- CHANGE: Removed earlier workaround code to copy and configure reaver binaries.
- CHANGE: Modified the postintall and postremove scripts to remove workarounds in the setup.
- CHANGE: Modified calls to execute reaver and wash binaries.
- NEW: Added Pali in the credits. Thanks.
INSTRUCTIONS:
WARNING: This version will work only with Kernel-Power version 51 and above.
- To override the autodiscovery of the drivers location and use the default, create an empty file in /home/user/.cleven/skipKernelCheck
Code:touch /home/user/.cleven/skipKernelCheck- To skip the kernel check in the startup, create an empty file in /home/user/.cleven/skipVersionCheck
Code:touch /home/user/.cleven/skipVersionCheck
EDIT: I understood from wiki that support to older KPs including KP50 has been dropped. request you to attach the weblink for the earlier version of 4.1-1. thanks in advance.
Last edited by bharathkumarst; 2012-08-06 at 14:57. Reason: problem status update
 |
|
2012-08-06
, 22:17
|
|
Posts: 1,648 |
Thanked: 2,122 times |
Joined on Mar 2007
@ UNKLE's Never Never Land
|
#726
|
Originally Posted by bharathkumarst
1. Uninstall cleven
Thanks Saturn. I have KP50. earlier cleven version was working properly. but accidentally w/o reading ur post I updated to this new version which will support only KP51 and above. i created a mess. pl let me know how to go back to my earlier version. thanks in advance. i am a noob using cleven.
EDIT: I understood from wiki that support to older KPs including KP50 has been dropped. request you to attach the weblink for the earlier version of 4.1-1. thanks in advance.
2. Disable devel repo
3. Install cleven
__________________
Packages: elGR Locale, SMSCON Editor, Swappolube, CSSU Features Configuration, Snuggle, YAMAS, Cleven
Garage: SMSCON, Swappolube, CSSU Features Configuration, Snuggle
Wiki: SMSCON, SMSCON Editor, Swappolube, CSSU Features Configuration, Cleven
Packages: elGR Locale, SMSCON Editor, Swappolube, CSSU Features Configuration, Snuggle, YAMAS, Cleven
Garage: SMSCON, Swappolube, CSSU Features Configuration, Snuggle
Wiki: SMSCON, SMSCON Editor, Swappolube, CSSU Features Configuration, Cleven
| The Following User Says Thank You to Saturn For This Useful Post: | ||
|
|
2012-08-10
, 07:09
|
|
Posts: 7 |
Thanked: 0 times |
Joined on Jul 2012
|
#727
|
Originally Posted by the_envy
im terribly sorry for asking you again the_envy... which kernel-power will i use? there are 47,48,49,50 and latest 51. can you make a URL for specific KP? and how to enable extra-repo? please one more help just this one.
well, all the dependencies are installed automatically, just make sure you have letest Kernel-Power and all extras- repositories enabled when you are installing Cleven
cold anyone please explain me about WPS type of security, which appeared in latest version of Cleven?
i know i bother you a lot. im sorry.
|
|
2012-08-11
, 20:49
|
|
Posts: 275 |
Thanked: 46 times |
Joined on Feb 2010
|
#728
|
Hi Saturn, I would like to use cleven, but I don't succeed. I prefer to use things in extra so I installed kernel power 50. I think I succeeded in doing that because uname -r gives the right output as in the kernel power wiki.
But cleven (the one in extra repository) says that it's not found a compatible kernel version for injection drivers. Have you any ideas in order to make it work? I would prefer not to put KP51 since it's unstable.
But cleven (the one in extra repository) says that it's not found a compatible kernel version for injection drivers. Have you any ideas in order to make it work? I would prefer not to put KP51 since it's unstable.
|
|
2012-08-12
, 00:14
|
|
Posts: 1,648 |
Thanked: 2,122 times |
Joined on Mar 2007
@ UNKLE's Never Never Land
|
#729
|
Originally Posted by Patroclo
I'm not infront of a pc to check, but from memory the version in extras-testing should work for you.
Hi Saturn, I would like to use cleven, but I don't succeed. I prefer to use things in extra so I installed kernel power 50. I think I succeeded in doing that because uname -r gives the right output as in the kernel power wiki.
But cleven (the one in extra repository) says that it's not found a compatible kernel version for injection drivers. Have you any ideas in order to make it work? I would prefer not to put KP51 since it's unstable.
Please check that. Otherwise I will post tomorrow a version spesific for kp50.
__________________
Packages: elGR Locale, SMSCON Editor, Swappolube, CSSU Features Configuration, Snuggle, YAMAS, Cleven
Garage: SMSCON, Swappolube, CSSU Features Configuration, Snuggle
Wiki: SMSCON, SMSCON Editor, Swappolube, CSSU Features Configuration, Cleven
Packages: elGR Locale, SMSCON Editor, Swappolube, CSSU Features Configuration, Snuggle, YAMAS, Cleven
Garage: SMSCON, Swappolube, CSSU Features Configuration, Snuggle
Wiki: SMSCON, SMSCON Editor, Swappolube, CSSU Features Configuration, Cleven
I've just cracked my WRT-54G Router with tomato firmware and it only took 5 minutes to get 45000 IVs. Had no luck on it with wifite and injection, only got 90 IVs after one hour.
Sometimes I come across WEP secured routers when repairing the computers or network of acquaintances and I think this will get very handy to quickly show what can be done with a smart Smartphone.
I'm looking forward to watch their reaction.
Last edited by conred; 2012-08-05 at 19:54.