ohnow i see: i wanted to type 13% and not 30%. sry for that...
so heres the screenshot

Your PR Legacy image is 009 but you are using a 001 image to flash...Are you using a German N9? Give me the colour and capacity too and I'll get you the direct links to rootfs.bin and emmc.bin instead of you searching them from navifirm...

yes german n9. its normally black(now its white because i changed the housing) and 16gb

D:\Programme\Nokia\Flasher>flasher -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Device is in Sync and connect mode, sending ADL reboot.
ERROR: ReadFile(65540) GetOverlappedResult() error 995 timeout 4975 ms
Unable to detect flashing interface: standing by for device reboot.
Suitable USB interface (bootloader) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Success

D:\Programme\Nokia\Flasher>flasher -f -F rootfs.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 17479 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 82 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 2913 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1684 kB/s]
[x] rootfs [finished 100 % 1170206 / 1170206 kB 9744 kB/s]
Updating SW release
Success

D:\Programme\Nokia\Flasher>flasher -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Success

N9 16GB black
Thanks for your help

The links are in the following post: http://talk.maemo.org/showpost.php?p...7&postcount=19

strange: now i see...on the old sim-part there is: 059J1V4 64 gb :/ i thougt that i bought 16 gb...(it wasnt new...i bought it used)

wheeee ... 64G for the price of a 16G? Lucky man!

Oh its 64gb then use the following links:


rootfs.bin: http://nds2.fds-fire.nokia.com/p/d/f...M1-958_ARM.bin


emmc.bin: http://nds2.fds-fire.nokia.com/p/d/f..._EMMC_DACH.bin

yes funny my story: i had a black n9 16gb....3 weeks ago i was drunken and lost it than i bought a new(used) one(thought it has 16gb and also black). i bought a new white housing for it...brought it to a phone-store and they changed the housing for me....the question is: is it the right sim-part for my phone?(dont know it because it was used)

download-process:41%

ok i made it ok now i see a blue bar (now 50%).

whats next?