Notices

Latest update from Alex at Hamachi staff:

"I got tuncfg+hamachi bundle working, BUT got stuck at something
else. The tunneling device goes up, gets configured, but then
some weird sh*t happens with ARPs. Not sure what's your level of
networking knowledge, but here's a summary -

* say, I ping n770 from my box here over the tunnel

* the ping is successfully de-tunneled and stuffed into tun device
and shortly after that Linux sends an ARP request for my 5.x IP
(this ARP is presumably triggered by n770's pong packet)

* hamachi daemon replies with ARP response, but it appears to be
ignored/discarded by Linux, because it again sends an ARP request

I will have to look at 2.6.16 sources to see what can be causing
this. "

Suggestions anyone?

Well, seems like it was a compiler error. Here is the link, no .deb file just now.
http://files.hamachi.cc/linux/nokia-770/
just do
tar -zxvf filename.gz and follow instructions at the Hamachi website.

Get Hamachi on your 770 today!

Alex has posted the link:

http://files.hamachi.cc/linux/nokia-770

I installed it and so far it works identically to my Intel-based systems.

R\

I cannot seem to run "make install" from within the Hamachi created folder on the Nokia 770 after running "tar -zxvf hamachi-0.9.9.9-20-lnx-n770.tar.gz"

When I am root (Sudo su) it advises that "make" cannot be found.
(I do a "whoami" in xterm where it confirms I am root?)

Not hot on Linux so bound to be doing something wrong. i.e. Do a need to unpack the tar file in a particular folder?

I currently tried to run the make from within home/user/MyDocs/.documents/Hamachi-n770-0.9.9.9-20

Thanks for any help in advance.

---edit---

OK I read the README in the folder on the Nokia 770 and the command was "./Install" not "make install" it had to be something so simple

running hamachi and vnc viewer on my Nokia 770, works great to connect to my PC remotely and securely

I think I am a bit confused on the topic of installing hamachi. I moved the file to my MyDocs directory and proceeded to tar -zxvf hamachi-0.9.9.9-20-lnx-n770.tar.gz which unpacked the files.

First question, did I put it in the right directory? I did the sudo su - before hand where it prompts for a password and I hit enter. Is that correct? I ask this as for the following issues relate to that or the directory of install.

I then moved to the hamachi directory and ran ./install. The files started to install, but I got
cp: unable to open '/usr/bin/hamachi': Permission denied
chmod: /usr/bin/hamachi: No such file or directory
Creating hamachi-init symlink...
kn: /usr/bin/hamachi-init: Permission denied
Copy tuncfg into /sbin...
cp: unable to open '/sbin/tuncfg': Permission denied
chmod: /sbin/tuncfg: No such file or directory

Hamachi is installed. See README for what to do next.

So i tried to do init
init: must be superuser.

What do I need to do to fix this situation?

You neet to become root.
sudo su - shouldn't ask for a password.
root's prompt ends in #

I tried to install it on my nas which is powered by an Intel 80219 processor (XScale, little endian) but it doesn't work.

I've built and launched the tuncfg file, but impossible to run the hamachi-init and hamachi programs.

The nokia s built seems not work with xscale plateform.

Having another try at getting hamachi installed on the 770...

to the linux pro's.
When i try to copy the tuncfg file to /sbin/tuncfg I get answer of omitting directory

Why????

Can't figure out why every one else can get hanachi installed but me....

would someone volunteer to SSH into my noika to install for me?

(if it's possible)

Cheers

I have a N770 with HE installed. I'v got Hamachi installed. In root, I get "permission denied" when I enter "tuncfg" Any help appreciated. In root I'm entering # hamachi-n770-0.9.9.9-20/tuncfg