Active Topics

 


Reply
Thread Tools
Posts: 16 | Thanked: 2 times | Joined on Jan 2008
#11
i must be nuts bc I have an 810 and can't find a slider lock,button. I've,got the rear battery cover lock and every other button's functionality figured out. where is the slide lock on a 810?
 
fpp's Avatar
Posts: 2,853 | Thanked: 968 times | Joined on Nov 2005
#12
On the upper side on the right (opposite the full screen button).

Confusion may result from the fact that it "locks" the screen and the other buttons, but it doesn't "lock" itself - you slide it to the left, and it comes back to its original position.
 
MikeL's Avatar
Posts: 356 | Thanked: 27 times | Joined on Jun 2006 @ Madrid, Spain
#13
On the top and on the right is the lock switch. --edit-- Bump fpp

Also note that with this switch set to locked, when you slide open the keyboard the lock option is temporarily overridden and the device is activated but as soon as you close the keyboard it returns to the locked state. Quite a neat feature

The only problem with this particular lock switch is it's fiddly to operate, I actually dropped my N810 today whilst operating this particular switch. (Damaging/cracking the case and stand on one corner slightly)

Really do think we need some form of hand strap on the N810 whilst on the move to prevent dropping when opening and closing keyboard and operating tiny switches with big fingers.
__________________
Do you Stream? You BET I Stream! http://mikesl300i.blogspot.com/

Last edited by MikeL; 2008-01-17 at 20:13.
 
Posts: 16 | Thanked: 2 times | Joined on Jan 2008
#14
sorry, i now get the key-screen lock functionality, I was asking if there was some sort of button that physically locked the keyboard from sliding down (or screen from sliding up depending on your pov
 
fpp's Avatar
Posts: 2,853 | Thanked: 968 times | Joined on Nov 2005
#15
Don't think so...
 
Posts: 130 | Thanked: 13 times | Joined on Dec 2007
#16
Originally Posted by MikeL View Post
Really do think we need some form of hand strap on the N810 whilst on the move to prevent dropping when opening and closing keyboard and operating tiny switches with big fingers.
Off Topic, but someone posted on another thread...

Depending on the type, you can slip something though the Stylus sylo (with the stylus taken out) and it works quite well. Stylus still goes back in ok though just a smidge out compared to before.

Thread with pics is actually :


http://www.internettablettalk.com/fo...ad.php?t=14371

I intend to try it.

Hope that's useful.

Zuber
 

The Following 2 Users Say Thank You to Zuber For This Useful Post:
Reply


 
Forum Jump


All times are GMT. The time now is 23:48.