Strange USB Problem (Nokia N900) - Page 3 - maemo.org

Active Topics

Nokia N9-00 Prototype Build S1.12 (RM-680 codename "Dali") (250)
to Nokia N9 / N950 by en0s - 2 days, 10 hrs ago
[HOWTO] Comprehensive Firmware Flashing Guide for N9 (1,579)
to Nokia N9 / N950 by sunrianto - 2 days, 13 hrs ago
[Announce] Maebble - Pebble support for Maemo (118)
to Applications by glo-worm - 2 days, 22 hrs ago
Possible to flash Leste to eMMC? (6)
to Maemo 7 / Leste by Eri - 3 days, 12 hrs ago
more...

Page 3 of 3

< Prev

Thread Tools

seanmcken	2013-09-06 , 15:14
Posts: 863 \| Thanked: 213 times \| Joined on Feb 2012 @ Goa	#21

this is what i get when connections to mass storage or pc suite

1002.951080] wl1251: down
[ 1003.761657] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 1003.777252] wl1251: firmware booted (Rev 4.0.4.3.7)
[ 1003.895019] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1010.090026] wl1251: down
[ 1044.425689] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 1044.441253] wl1251: firmware booted (Rev 4.0.4.3.7)
[ 1044.559051] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1045.277526] wl1251: down
[ 1046.214263] gprs0: attached
[ 1048.547149] twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 1
[ 1048.547180] rx51_set_charger (connected = 0)
[ 1048.547210] rx51_update_charger_mode (mode = 0)
[ 1048.547973] rx51_set_wallcharger (connected = 0)
[ 1053.097198] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
[ 1053.097290] rx51_set_charger (connected = 1)
[ 1053.097320] rx51_update_charger_mode (mode = 1)
[ 1053.097320] rx51 - schedule delayed work in 2 seconds - rx51_detect_wallcharger
[ 1053.103363] musb_charger_detect (enabled = 1)
[ 1053.113006] rx51_set_wallcharger (connected = 0)
[ 1055.097351] rx51_detect_wallcharger (the_musb = cf0a80f0)
[ 1055.097381] musb_charger_detect (enabled = 1)
[ 1094.923980] musb_hdrc musb_hdrc: remove, state 4
[ 1094.924011] musb_hdrc musb_hdrc: roothub graceful disconnect
[ 1094.924041] usb usb1: USB disconnect, address 1
[ 1094.924072] usb usb1: unregistering device
[ 1094.924072] usb usb1: usb_disable_device nuking all URBs
[ 1094.924102] usb usb1: unregistering interface 1-0:1.0
[ 1094.933013] usb 1-0:1.0: uevent
[ 1095.061920] usb usb1: uevent
[ 1095.064880] musb_hdrc musb_hdrc: USB bus 1 deregistered
[ 1095.621582] g_nokia gadget: using random self ethernet address
[ 1095.621643] g_nokia gadget: using random host ethernet address
[ 1095.630523] usb0: MAC 72:62:ce:80:aa:da
[ 1095.630554] usb0: HOST MAC fe:51:2c:99:14:e0
[ 1095.630584] g_nokia gadget: USB CDC Phonet function
[ 1095.630615] g_nokia gadget: using musb_hdrc, OUT ep1out, IN ep1in
[ 1095.630706] g_nokia gadget: USB CDC Phonet function
[ 1095.630706] g_nokia gadget: using musb_hdrc, OUT ep1out, IN ep1in
[ 1095.630767] g_nokia gadget: N900 (PC-Suite Mode)
[ 1095.630767] g_nokia gadget: g_nokia ready
[ 1095.630798] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 1095.654327] drivers/usb/core/inode.c: creating file 'devices'
[ 1095.654388] drivers/usb/core/inode.c: creating file '001'
[ 1095.812530] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[ 1095.812652] usb usb1: default language 0x0409
[ 1095.813629] usb usb1: uevent
[ 1095.897155] usb usb1: usb_probe_device
[ 1095.897186] usb usb1: configuration #1 chosen from 1 choice
[ 1095.897277] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1095.897430] usb 1-0:1.0: uevent
[ 1095.908325] hub 1-0:1.0: usb_probe_interface
[ 1095.908355] hub 1-0:1.0: usb_probe_interface - got id
[ 1095.908355] hub 1-0:1.0: USB hub found
[ 1095.908477] hub 1-0:1.0: 1 port detected
[ 1095.908508] hub 1-0:1.0: standalone hub
[ 1095.908508] hub 1-0:1.0: individual port power switching
[ 1095.908508] hub 1-0:1.0: no over-current protection
[ 1095.908538] hub 1-0:1.0: power on to power good time: 10ms
[ 1095.908569] hub 1-0:1.0: local power source is good
[ 1095.908569] hub 1-0:1.0: enabling power on all ports
[ 1095.944915] drivers/usb/core/inode.c: creating file '001'
[ 1095.957946] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1095.957977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1095.958007] usb usb1: Product: MUSB HDRC host driver
[ 1095.958007] usb usb1: Manufacturer: Linux 2.6.28.10-power51 musb-hcd
[ 1095.958007] usb usb1: SerialNumber: musb_hdrc
[ 1096.003662] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 1098.519287] hub 1-0:1.0: hub_suspend
[ 1098.519348] usb usb1: bus auto-suspend
[ 1116.362762] twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 1
[ 1116.362792] rx51_set_charger (connected = 0)
[ 1116.362792] rx51_update_charger_mode (mode = 0)
[ 1116.364440] rx51_set_wallcharger (connected = 0)
[ 1119.716552] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
[ 1119.716583] rx51_set_charger (connected = 1)
[ 1119.716583] rx51_update_charger_mode (mode = 1)
[ 1119.716613] rx51 - schedule delayed work in 2 seconds - rx51_detect_wallcharger
[ 1119.720275] musb_charger_detect (enabled = 1)
[ 1119.730194] rx51_set_wallcharger (connected = 0)
[ 1121.714538] rx51_detect_wallcharger (the_musb = cf0a80f0)
[ 1121.714569] musb_charger_detect (enabled = 1)
[ 1130.050537] musb_hdrc musb_hdrc: remove, state 4
[ 1130.050567] musb_hdrc musb_hdrc: roothub graceful disconnect
[ 1130.050628] usb usb1: USB disconnect, address 1
[ 1130.050628] usb usb1: unregistering device
[ 1130.050659] usb usb1: usb_disable_device nuking all URBs
[ 1130.050689] usb usb1: unregistering interface 1-0:1.0
[ 1130.053100] usb 1-0:1.0: uevent
[ 1130.058166] usb usb1: uevent
[ 1130.059783] musb_hdrc musb_hdrc: USB bus 1 deregistered
[ 1142.525482] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007
[ 1142.525512] g_file_storage gadget: Number of LUNs=2 Number of buffers=16
[ 1142.525543] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 1142.531585] drivers/usb/core/inode.c: creating file 'devices'
[ 1142.531616] drivers/usb/core/inode.c: creating file '001'
[ 1142.536437] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[ 1142.536560] usb usb1: default language 0x0409
[ 1142.536956] usb usb1: uevent
[ 1142.541564] usb usb1: usb_probe_device
[ 1142.541595] usb usb1: configuration #1 chosen from 1 choice
[ 1142.541656] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1142.541809] usb 1-0:1.0: uevent
[ 1142.544921] hub 1-0:1.0: usb_probe_interface
[ 1142.544921] hub 1-0:1.0: usb_probe_interface - got id
[ 1142.544952] hub 1-0:1.0: USB hub found
[ 1142.545074] hub 1-0:1.0: 1 port detected
[ 1142.545074] hub 1-0:1.0: standalone hub
[ 1142.545104] hub 1-0:1.0: individual port power switching
[ 1142.545104] hub 1-0:1.0: no over-current protection
[ 1142.545104] hub 1-0:1.0: power on to power good time: 10ms
[ 1142.545135] hub 1-0:1.0: local power source is good
[ 1142.545166] hub 1-0:1.0: enabling power on all ports
[ 1142.552856] drivers/usb/core/inode.c: creating file '001'
[ 1142.555938] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1142.555969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1142.555969] usb usb1: Product: MUSB HDRC host driver
[ 1142.555999] usb usb1: Manufacturer: Linux 2.6.28.10-power51 musb-hcd
[ 1142.555999] usb usb1: SerialNumber: musb_hdrc
[ 1142.644409] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 1144.644256] hub 1-0:1.0: hub_suspend
[ 1144.644287] usb usb1: bus auto-suspend
[ 1157.714843] slide (GPIO 71) is now open
[ 1180.460479] twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 1
[ 1180.460479] rx51_set_charger (connected = 0)
[ 1180.460510] rx51_update_charger_mode (mode = 0)
[ 1180.461212] rx51_set_wallcharger (connected = 0)
[ 1181.792388] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
[ 1181.792419] rx51_set_charger (connected = 1)
[ 1181.792449] rx51_update_charger_mode (mode = 1)
[ 1181.792449] rx51 - schedule delayed work in 2 seconds - rx51_detect_wallcharger
[ 1181.797790] musb_charger_detect (enabled = 1)
[ 1181.808319] rx51_set_wallcharger (connected = 0)
[ 1183.784790] rx51_detect_wallcharger (the_musb = cf0a80f0)
[ 1183.784820] musb_charger_detect (enabled = 1)
[ 1201.613098] musb_hdrc musb_hdrc: remove, state 4
[ 1201.613128] musb_hdrc musb_hdrc: roothub graceful disconnect
[ 1201.613189] usb usb1: USB disconnect, address 1
[ 1201.613189] usb usb1: unregistering device
[ 1201.613220] usb usb1: usb_disable_device nuking all URBs
[ 1201.613220] usb usb1: unregistering interface 1-0:1.0
[ 1201.617095] usb 1-0:1.0: uevent
[ 1201.617675] usb usb1: uevent
[ 1201.617767] musb_hdrc musb_hdrc: USB bus 1 deregistered
[ 1201.890350] g_nokia gadget: using random self ethernet address
[ 1201.890441] g_nokia gadget: using random host ethernet address
[ 1201.897979] usb0: MAC aa:71:4c:8a:09:43
[ 1201.898010] usb0: HOST MAC ba:da:77:f0:5e:f1
[ 1201.898040] g_nokia gadget: USB CDC Phonet function
[ 1201.898071] g_nokia gadget: using musb_hdrc, OUT ep1out, IN ep1in
[ 1201.898162] g_nokia gadget: USB CDC Phonet function
[ 1201.898162] g_nokia gadget: using musb_hdrc, OUT ep1out, IN ep1in
[ 1201.898223] g_nokia gadget: N900 (PC-Suite Mode)
[ 1201.898223] g_nokia gadget: g_nokia ready
[ 1201.898254] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 1201.904876] drivers/usb/core/inode.c: creating file 'devices'
[ 1201.904907] drivers/usb/core/inode.c: creating file '001'
[ 1201.909637] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[ 1201.910034] usb usb1: default language 0x0409
[ 1201.910430] usb usb1: uevent
[ 1201.915435] usb usb1: usb_probe_device
[ 1201.915466] usb usb1: configuration #1 chosen from 1 choice
[ 1201.915527] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1201.915679] usb 1-0:1.0: uevent
[ 1201.919281] hub 1-0:1.0: usb_probe_interface
[ 1201.919311] hub 1-0:1.0: usb_probe_interface - got id
[ 1201.919311] hub 1-0:1.0: USB hub found
[ 1201.919433] hub 1-0:1.0: 1 port detected
[ 1201.919433] hub 1-0:1.0: standalone hub
[ 1201.919464] hub 1-0:1.0: individual port power switching
[ 1201.919464] hub 1-0:1.0: no over-current protection
[ 1201.919464] hub 1-0:1.0: power on to power good time: 10ms
[ 1201.919494] hub 1-0:1.0: local power source is good
[ 1201.919525] hub 1-0:1.0: enabling power on all ports
[ 1201.928710] drivers/usb/core/inode.c: creating file '001'
[ 1201.934387] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1201.934417] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1201.934417] usb usb1: Product: MUSB HDRC host driver
[ 1201.934448] usb usb1: Manufacturer: Linux 2.6.28.10-power51 musb-hcd
[ 1201.934448] usb usb1: SerialNumber: musb_hdrc
[ 1202.019317] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 1204.519531] hub 1-0:1.0: hub_suspend
[ 1204.519592] usb usb1: bus auto-suspend
~ $

Quote & Reply |

seanmcken	2013-09-06 , 15:15
Posts: 863 \| Thanked: 213 times \| Joined on Feb 2012 @ Goa	#22

Quote & Reply |

	nokiabot	2013-09-06 , 15:32
	Posts: 1,974 \| Thanked: 1,834 times \| Joined on Mar 2013 @ india	#23

install backup menu and try usb mass storage mode . you will know if lts the usb to blame furthermore copying huge files is fast

Quote & Reply |

The Following User Says Thank You to nokiabot For This Useful Post:
handaxe

seanmcken	2013-09-06 , 16:03
Posts: 863 \| Thanked: 213 times \| Joined on Feb 2012 @ Goa	#24

yeah i tried, but wen i press W, it just waits for a second and window gets refreshed and again it asks for an input, and same thing keep on happening

Quote & Reply |

	nokiabot	2013-09-06 , 17:48
	Posts: 1,974 \| Thanked: 1,834 times \| Joined on Mar 2013 @ india	#25

something got blown maybe beforehand try a reflash of both emmc and rootfs

Quote & Reply |

The Following User Says Thank You to nokiabot For This Useful Post:
handaxe

handaxe	2013-09-06 , 22:20
Posts: 1,378 \| Thanked: 1,604 times \| Joined on Jun 2010 @ Göteborg, Sweden	#26

Yup, some or other hw fault seems possble. A reflash resulting in the same problems would be pretty conclusive.

Quote & Reply |

seanmcken	2013-09-07 , 01:43
Posts: 863 \| Thanked: 213 times \| Joined on Feb 2012 @ Goa	#27

shittttttt, reflash is showing somthng "waiting for device" but nothing" happening, im scared.

Quote & Reply |

seanmcken	2013-09-07 , 02:04
Posts: 863 \| Thanked: 213 times \| Joined on Feb 2012 @ Goa	#28

when i connected pc showed "device cannot be recognized" and then flashed started showing "waiting" and i clicked on that "dvc cnt b recognized" it shows "Unknown device" and "Code 43". what'd be that? and whenever i boot my phone and when i go to file manager, sometimes mydocs it just shows 2.10 GB Main Memory and free space 1.4 GB something and File manager is just blank, info abt 1.4 Gb got it (File manager - Memory Usage) but File Manager is Blank With "No Drives" and sometimes After 2 minutes it shows 27Gb watever, so is this messed with something partitions?

Last edited by seanmcken; 2013-09-07 at 02:14.

Quote & Reply |

	nokiabot	2013-09-07 , 05:44
	Posts: 1,974 \| Thanked: 1,834 times \| Joined on Mar 2013 @ india	#29

first try this for xp right click on your 32 gb go to propertes then hardware then check disk for errors tick those boxes and wait. better if you format it on device or xp