jPhone sounds like a cheap Apple knock off to me, which it really isn't. Stick to what Jolla called it I say, or as Javispedro found, if you need a more complex name the JP-1301

Does the native browser have "find in page" function? I can't seem to find it anywhere...

No, I believe it's one of the things that were requested to Jolla.

Then...
JP-1301 it is. Assuming JP stands for jPhone. JP-999 can be optional

No need to call it FE. Jolla is just fine as long as there is only one model. Nobody talks about king Henry I, until there is a Henry II.

And please do not call it jPhone: that is really awful.

Me, I love jolla (pronounced yolla).

Is there a solution to delete the files (".obb", etc.) of Android Apps? Only with "Devloper Mode"?

How to keep internet connection alive?
I see if my phone no signal, internet disconnected, after have signal, the internet connection cant connect automically, I need do it manually

MTP does not work on Ubuntu 13.10 64bit / Ubuntu 14.04 64bit.

dmesg from Ubuntu:

[24811.904706] usb 2-1.8.4: new high-speed USB device number 40 using ehci-pci
[24811.997346] usb 2-1.8.4: New USB device found, idVendor=2931, idProduct=0a01
[24811.997348] usb 2-1.8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[24811.997350] usb 2-1.8.4: Product: Sailfish
[24811.997351] usb 2-1.8.4: Manufacturer: Jolla
[24811.997352] usb 2-1.8.4: SerialNumber: DU3BM00999
[24812.060452] usb 2-1.8.4: usbfs: process 6950 (gvfs-gphoto2-vo) did not claim interface 4 before use
[24812.488340] usb 2-1.8.4: usbfs: process 6950 (gvfs-gphoto2-vo) did not claim interface 4 before use
[24812.488351] usb 2-1.8.4: usbfs: process 6950 (gvfs-gphoto2-vo) did not claim interface 4 before use
[24812.488357] usb 2-1.8.4: usbfs: process 6950 (gvfs-gphoto2-vo) did not claim interface 4 before use
[24812.488366] usb 2-1.8.4: usbfs: process 6950 (gvfs-gphoto2-vo) did not claim interface 4 before use
[24929.397768] usb 2-1.8.4: USB disconnect, device number 40
[24957.233575] usb 2-1.8.4: new high-speed USB device number 41 using ehci-pci
[24957.326414] usb 2-1.8.4: New USB device found, idVendor=2931, idProduct=0a01
[24957.326417] usb 2-1.8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[24957.326418] usb 2-1.8.4: Product: Sailfish
[24957.326419] usb 2-1.8.4: Manufacturer: Jolla
[24957.326420] usb 2-1.8.4: SerialNumber: DU3BM00999

dmesg from Jolla:

[21989.191146] [TSL277X_P][Before] raw=64, status=0, far=500, near=791
[21989.191268] [TSL277X_P][After] far=341, near=791, from=0, to=791
[21991.898150] dsme-server(670) send signal 1 to dsme(669)
[21991.902271] request_suspend_state: sleep (0->3) at 21992022854372 (2013-12-30 18:55:30.035537550 UTC)
[21991.902667] [TP] synaptics_early_suspend() +++
[21991.962365] [TP] isr status = 0
[21991.991207] [TP] isr status = 0
[21991.991451] [TP] enable double tap gesture.
[21992.030792] [TP] synaptics_early_suspend()3956 ---
[21992.052950] wlan: [885:E :SME] sme_QosPmcDeviceStateUpdateInd: 7172: nothing to process in PMC state 6
[21992.053072] wlan: [20945:E :HDD] hdd_conf_hostarpoffload:
[21992.053072]
[21992.053133] wlan: [20945:E :HDD] hdd_conf_hostarpoffload: Enabled
[21992.053133]
[21992.058291] [WH Lee] taos_als_enable:n=0, rc=0
[21992.409611] mdp4_dsi_cmd_off: Error, SET_CLK_OFF by force
[21992.409733] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
[21992.418217] mipi_truly_otm9608a_lcd_off()
[21992.554155] mipi_truly_otm9608a_lcd_off()--
[21992.694793] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
[21992.720400] hdmi_pll_enable: HDMI PLL not locked
[21992.734286] hdmi_pll_enable: HDMI PLL not locked
[21992.744541] PM: suspend entry 2013-12-30 18:55:30.877838786 UTC
[21992.780342] Freezing user space processes ... (elapsed 0.02 seconds) done.
[21993.266958] [BAT]usbin_valid_irq_handler
[21993.267050] [BAT]notify_usb_of_the_plugin_event = 1, USB_PLUGIN_WAKE_LOCK = 1
[21993.267050] USB:tg msm_otg_set_vbus_state online=1 init=1
[21993.267081] [BAT]handle_usb_insertion_removal, unplug_check_work, Start
[21993.273093] msm_otg msm_otg: USB exited from low power mode
[21993.273124] USB:tg msm_otg_sm_work b_idle work
[21993.273124] USB:tg msm_chg_detect_work chg_state=0
[21993.309534] Freezing remaining freezable tasks ...
[21993.310999] active wake lock msm_otg
[21993.311060] active wake lock pm8921_usb_plugin
[21993.311091]
[21993.311121] Freezing of tasks aborted
[21993.311182]
[21993.311213] Restarting kernel threads ... done.
[21993.312983] Restarting tasks ...
[21993.325100] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
[21993.325222] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[21993.334653] done.
[21993.335233] USB:tg msm_chg_detect_work chg_state=1
[21993.335538] PM: suspend exit 2013-12-30 18:55:31.468804755 UTC
[21993.335660] suspend: exit suspend, ret = -16 (2013-12-30 18:55:31.468865795 UTC)
[21993.335690] active wake lock msm_otg
[21993.335721] active wake lock pm8921_usb_plugin
[21993.347410] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
[21993.347837] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[21993.379457] USB:tg msm_chg_detect_work chg_state=2
[21993.409458] USB:tg msm_chg_detect_work chg_state=5
[21993.411198] USB:tg cable_detect_get_adc chan=518623822, adc_code=24818, measurement=13223 physical=13223
[21993.411228] USB:tg msm_chg_detect_work cable adc value=13 general cable
[21993.411228] USB::android android_set_usb_serialno general cable to use user serialno
[21993.411289] USB:tg msm_chg_detect_work call sdp check
[21993.411289] USB:tg msm_otg_sm_work b_idle work
[21993.411320] USB:tg msm_otg_notify_chg_type chg_type=USB_SDP_CHARGER(1) curernt chg_type=0
[21993.411350] USB:tg msm_otg_notify_chg_type end :: current charger type=POWER_SUPPLY_TYPE_USB cur_chg_type=1
[21993.411381] [BAT]pm8921_set_usb_power_supply_type = USB
[21993.411381] msm_otg msm_otg: Avail curr from USB = 100
[21993.411411] ****USB:tg msm_otg_notify_charger check following condition****
[21993.411442] ****USB::speed 0 chg_type USB_SDP_CHARGER****
[21993.411442] USB:tg msm_otg_notify_charger Avail Curr form USB = 100
[21993.411472] [BAT]pm8921_charger_vbus_draw = 100 mA
[21993.411564] USB:tg msm_otg_start_peripheral on=1
[21993.414830] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[21993.761388] [BAT]## USB_ONLINE: 1 (plugin=1)
[21993.763800] [BAT]## SOC= 43( 43, 43),3783(3778),A=0122,T=289,On=1,0,(1),USB 100(100),vd=4350(0,0),ib=1000,0,F03,R00,W31
[21993.913563] request_suspend_state: wakeup (3->0) at 21994034146908 (2013-12-30 18:55:32.046830086 UTC)
[21993.929983] hdmi_pll_enable: HDMI PLL not locked
[21993.937674] dsme-server(670) send signal 1 to dsme(669)
[21993.950889] hdmi_pll_enable: HDMI PLL not locked
[21994.002469] mipi_truly_otm9608a_lcd_on(), mipi_mode=1, msm_project_id=3
[21994.307673] mipi_truly_otm9608a_lcd_on()--
[21994.320430] mdp_enable_irq: MDP IRQ term-0x400 is already set, mask=400 irq=1
[21994.332791] wlan: [885:E :SME] sme_QosPmcDeviceStateUpdateInd: 7172: nothing to process in PMC state 6
[21994.332913] wlan: [20945:E :HDD] hdd_conf_hostarpoffload:
[21994.332913]
[21994.336606] [TP] synaptics_late_resume() +++
[21994.340207] [TP] disable wakeup gesture.
[21994.340268] [TP] synaptics_late_resume()4005 ---
[21994.359466] [WH Lee] taos_als_enable:n=1, rc=0
[21994.399753] mipi_truly_otm9608a_set_backlight(), BL value is 51, #3
[21995.762701] [TSL277X_P][Before] raw=1023, status=1, far=341, near=791
[21995.762792] [TSL277X_P][After] far=500, near=791, from=500, to=65535
[21996.078617] USB::enable_store enable=0
[21996.078831] enable_store: android_usb: already disabled
[21996.079136] USB::android_enable_function obex
[21996.079258] USB::android_enable_function ffs
[21996.080418] USB::enable_store enable=1
[21996.108100] mipi_truly_otm9608a_set_backlight(), BL value is 50, #2
[21996.152416] ffs_ep0_write: read descriptors
[21996.152446] ffs_ep0_write: read strings
[21996.159099] USB::udc udc_irq set enumeration true
[21996.159099] USB::udc udc_irq USB suspend state
[21996.159130] USB:tg msm_otg_sm_work b_peripheral work
[21996.377534] USB:tg msm_otg_notify_chg_type chg_type=USB_SDP_CHARGER(1) curernt chg_type=1
[21996.377625] msm_otg msm_otg: Avail curr from USB = 0
[21996.377656] ****USB:tg msm_otg_notify_charger check following condition****
[21996.377717] ****USB::speed 0 chg_type USB_SDP_CHARGER****
[21996.377747] USB:tg msm_otg_notify_charger Avail Curr form USB = 0
[21996.377808] [BAT]pm8921_charger_vbus_draw = 0 mA
[21996.377931] USB::composite composite_disconnect
[21996.378022] USB::udc udc_irq usb rest
[21996.378144] android_work: android_work: did not send uevent (0 0 (null))
[21996.379731] USB::udc udc_irq speed detection handshake suspend state=0 configure state=0
[21996.386354] dsme-server(670) send signal 1 to dsme(669)
[21996.437262] [TSL277X_P][Before] raw=59, status=0, far=500, near=791
[21996.437354] [TSL277X_P][After] far=341, near=791, from=0, to=791
[21996.448738] android_work: android_work: sent uevent USB_STATE=CONNECTED
[21996.452187] USB:tg msm_otg_notify_chg_type chg_type=USB_SDP_CHARGER(1) curernt chg_type=1
[21996.452248] USB::composite composite_disconnect
[21996.452278] USB::udc udc_irq usb rest
[21996.452400] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
[21996.456185] USB::udc udc_irq speed detection handshake suspend state=0 configure state=0
[21996.522567] USB::udc isr_tr_complete_handler usb state-->addressed err=0
[21996.542527] android_work: android_work: sent uevent USB_STATE=CONNECTED
[21996.543687] USB::udc isr_tr_complete_handler usb state-->configured 1
[21996.543778] android_usb gadget: high-speed config #1: android_usb
[21996.543931] USB::composite set_config set usb configurate draw 500 mA
[21996.543992] USB::udc ci13xxx_vbus_draw draw 500 mA
[21996.544022] USB:tg msm_otg_notify_chg_type chg_type=USB_SDP_CHARGER(1) curernt chg_type=1
[21996.544083] msm_otg msm_otg: Avail curr from USB = 500
[21996.544144] USB:tg msm_otg_notify_charger Avail Curr form USB = 500
[21996.544175] [BAT]pm8921_charger_vbus_draw = 500 mA
[21996.544267] [BAT]iusbmax = 500 mA
[21996.555071] [BAT]fastchg_irq_handler, EOC_WAKE_LOCK = 1, cc for bat battery = -2449695
[21996.599722] android_work: android_work: sent uevent USB_STATE=CONFIGURED
[21996.881150] [BAT]## STATUS: Discharging -> Charging (Real)
[21996.881211] [BAT]## STATUS: Discharging -> Charging (AP)
[21996.962060] [BAT]## SOC= 43( 43, 43),3821(3781),A=-178,T=287,On=1,0,(1),USB 500(500),vd=4350(0,0),ib=1000,0,F07,R00,W3B
[21998.306513] mipi_truly_otm9608a_set_backlight(), BL value is 51, #1
[21998.419652] USB:tg msm_chg_sdp_check speed=3 enumeration=1
[21999.586995] SAT connect MC:0x10,LA:0x5
[21999.587056] generic ack:0x 10525c5, mgrstat:0x9402
[21999.587239] chan:138,ctrl:0,def:0, ref:2
[21999.587239] SAT activate grp start: ret:0
[21999.587270] generic ack:0x 20525c5, mgrstat:0x9402
[21999.587697] SAT:LA:5 reconf req
[21999.587758] sending subframe:11,ret:0
[21999.587819] sending clkgear:6,ret:0
[21999.587941] slim reconfig done!
[21999.587972] generic ack:0x 30525c5, mgrstat:0x9402
[21999.596945] CODEC connect MC:0x 11, port:a
[21999.597097] chan:138,ctrl:0,def:1, ref:2
[21999.597708] slim reconfig done!
[22001.921773] chan:138,ctrl:2,def:2, ref:2
[22001.921804] SAT oper:2 grp start:138, ret:0
[22001.921956] generic ack:0x 40525c5, mgrstat:0x9402
[22001.923208] SAT:LA:5 reconf req
[22001.923238] SLIM_CL: skip reconfig sequence
[22001.923391] generic ack:0x 50525c5, mgrstat:0x9402
[22001.928945] chan:138,ctrl:2,def:1, ref:1
[22001.929190] sending subframe:0,ret:0
[22001.929342] sending clkgear:a,ret:0
[22001.929617] slim reconfig done!dsme-server(670) send signal 1 to dsme(669)
[22020.387880] dsme-server(670) send signal 1 to dsme(669)
[22020.404483] dsme-server(670) send signal 1 to dsme(669)
[22020.404605] dsme-server(670) send signal 1 to dsme(669)
[22020.404666] dsme-server(670) send signal 1 to dsme(669)
[22020.404758] dsme-server(670) send signal 1 to dsme(669)
[22032.388613] dsme-server(670) send signal 1 to dsme(669)
[22033.508039] [TSL277X_P][Before] raw=1023, status=1, far=341, near=791
[22033.508130] [TSL277X_P][After] far=500, near=791, from=500, to=65535

Any clue what is going on here?

Just wondering if anyone has tried doing laser etching on TOH? Not sure the result will be very visible (or even look good).

If you are silly enough to interact with crap dave999 spews, please don't quote him.