Should this be added to the Sailfish N9 adaptation config?

/etc/fstab
/etc/usb-moded/dyn-modes/mass_storage.ini
What this does:
Adds MyDocs to Sailfish

Is it possible to activate and use LPM-screen on N9 running Sailfish image?

Flashed moslo kernel I get

Most of time people get the partitioning error is because there's not enough space in your MyDocs partition. You might want to save your stuff and delete files from there....

shouldn't it be 4gb free in MyDocs .. I already have 4.2GB free ?

That's WAY too tight

deleted the whole DCIM file .. and not it worked .. Thanks a lot
..
I installed ubiboot before flashing the Moslo Kernel succesfully ..
re-install ubiboot or no need ??

If you used the MOSLO kernel like it should be used, just booting it with flasher and not doing permanent flashing, then there is no need to reflash ubiboot kernel, it'll be there just like it was before using MOSLO.

thats why we should focus on the 3.5.3 kernel, the module works on the 3.5.3 kernel

but mysatroker isn't the actual issue why aliendalvik doesn't work: it's only used for sound and such. aliendalvik will probably even work without it. the real issues are hwcomposer and gralloc

Hello guys
I hope you can help
I'm trying to install a Sailfish OS on Nokia N9 using Windows
Using these steps

.......................................

DOWNLOAD FILES
=============
1.flashware for N9 from here
http://mrcrab.net/nokia/Nokia_N9.htm...uctType=RM-696

2.flasher for windows from here
http://skeiron.org/tablets-dev/maemo...her_3.12.1.exe

3.OpenMode Kernel from here
http://www.swagman.org/juice/ubiboot...openmode_l2fix

4.Moslo Kernel from here http://www.multiupload.nl/WLLK09RF96

5.Ubiboot specially for sailfish from here http://www.swagman.org/juice/ubiboot...31213_SFOS.tar

6.Sailfish Image from here
http://n9.araya.su/images/mic_images...ish_r3.tar.bz2

INSTALLATION FLASHER
================
7.Backup all your mobile data.

8.Rename N9 flashware files as emmc.bin and main.bin

9.Install flasher on your windows C:\Program Files\Nokia\Flasher

10.Copy all N9 flashware files including emmc.bin & main.bin in C:\Program Files\Nokia\Flasher

11.connect mobile with computer and open CMD (command prompt) in windows as administrator

12.type cd C:\Program Files\Nokia\Flasher

13.type flasher –i (your mobile will restart)

14.flash you firmware with this command flasher -f -F main.bin --erase-user-data=secure -F emmc.bin --erase-mmc=secure

15.after 10 15 minutes the phone should proceed to flash normally.

INSTALLATION OPENMODE KERNEL
=======================
16.put openmode kernel file in directory C:\Program Files\Nokia\Flasher

17.Now in cmd flasher window type flasher -a main.bin -k zImage_2.6.32.54-openmode_l2fix --flash-only=kernel -f –R

18.The phone should proceed to flash normally.

19.In your phone enable developer mode –settings-security-developer mode , Phone will bootup again

INSTALLATION MOSLO KERNEL
====================
20.Now copy Moslo Kernel files in directory C:\Program Files\Nokia\Flasher

21.And run this command flasher -k zImage-moslo -n initrd-moslo -l -b , Again phone will restart and some green color coding will run on mobile

22.Once it complete disconnect the phone and restart mobile normally

INSTALLATION UBIBOOT
================
23.Now extract and copy all Ubiboot files in directory C:\Program Files\Nokia\Flasher

24.Also copy these ubiboot files in your N9 MyDocs folder

25.Go to terminal in your mobile and type
devel-su
cd /home/user/MyDocs/
tar -xvf ubiboot_035_sailfishos.tar -C /

26.Now in computer flasher window type this command
flasher -a main.bin -k zImage_2.6.32.54-ubiboot-02_301013 --flash-only=kernel -f –R

27. phone should proceed to flash normally

INSTALLATION SAILFISH
================
28.Rename sailfish image file as sailfish.tar.bz2

29.Copy this sailfish.tar.bz2 file in your mobile MyDocs

30.Open Terminal in mobile and type
devel-su
rootme
cd /home/user/MyDocs/
mkdir /sailfish
mount /dev/mmcblk0p4 /sailfish
tar --numeric-owner -xvjf sailfish.tar.bz2 -C /sailfish/
sync

Now restart your mobile and in selection menu select sailfish



************************************************** **********

But there was a problem that my phone does not fail in the installation developer mode and I have tried a lot

I wish I could advise me a way to work with Windows (without using Terminal on the phone)