Active Topics

 


Page 3 of 3 12 3
Reply
Thread Tools
thedead1440 is offline thedead1440
2013-01-30 , 09:57
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#21
Originally Posted by nbedford View Post
Really, I thought the N9QT vol patche was based on all previous I had seen which got reset after call. If this is true I will have to take another look.
The N9QT tweak asks you if you want to enable this at startup and if so it won't be brought down; its enabled in mine and see the below to see my current setting due to N9QT:

Code:
Simple mixer control 'PreDriv',0
  Capabilities: pvolume penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 3
  Mono:
  Front Left: Playback 3 [100%] [6.00dB]
  Front Right: Playback 3 [100%] [6.00dB]
 
bibek's Avatar
bibek is offline bibek
2013-01-30 , 10:54
Posts: 368 | Thanked: 826 times | Joined on May 2012 @ India
#22
I dont know why but aftr doing a call, the speaker volume becomes normal again.
If I apply the tweak again, then volume boosts again. Weird.

And anything about earpiece volume? To increase in-call sound?
 
zlatko's Avatar
zlatko is offline zlatko
2013-02-03 , 07:46
Posts: 861 | Thanked: 936 times | Joined on Feb 2010 @ Bulgaria
#23
Just a follow up with my problem - all of a sudden call volume went back to normal on my device. That is without any intervention from my side.
I still can't tell if it was HW of SW related problem. But "all is well when end well"
 
Mr.Pancake is offline Mr.Pancake
2013-05-10 , 12:41
Posts: 25 | Thanked: 7 times | Joined on Nov 2012
#24
No solution?
 
Win7Mac's Avatar
Win7Mac is offline Win7Mac
2013-05-14 , 22:36
Community Council | Posts: 664 | Thanked: 1,648 times | Joined on Apr 2012 @ Hamburg
#25
Don't like the idea of blasting my speakers incidentally but would like to make use of N9QT tweak S, but not with 100%, rather something like 80-85%. Would that be possible?

As far as Schturman remembers from some russian forum it seems not.
Is that the last word?
__________________
Nokia 5110 > 3310 > 6230 > N70 > N9 BLACK 64GB
Hildon Foundation Board member
Maemo Community e.V. co-creator, founder and director since Q4/2016
Current Maemo Community Council member
 
mr666acdc is offline mr666acdc
2014-01-15 , 17:49
Posts: 30 | Thanked: 23 times | Joined on Nov 2010 @ Poland
#26
I found the solution to icrease call volume(earpiece). Edit file
Code:
/usr/share/pulseaudio/alsa-mixer/paths/nokia-dfl61-twl4030-output-earpiece.conf
and change in
Code:
# Enable earpiece output from DAC2 left channel only.
[Element Earpiece Mixer AudioL1]
switch = off
[Element Earpiece Mixer AudioR1]
switch = off
[Element Earpiece Mixer AudioL2]
switch = on
[Element Earpiece Mixer Voice]
switch = off
[Element Earpiece]
volume = 2
to
Code:
volume = 3
Reboot. Until now the earpiece volume will be 100%, even after reboot/call.
 

The Following 9 Users Say Thank You to mr666acdc For This Useful Post:
mautz is offline mautz
2014-03-24 , 21:23
Posts: 635 | Thanked: 1,535 times | Joined on Feb 2014 @ Germany
#27
Even with the tips in the above post the call volume was too low on my N9, so i had to edit the file
Code:
/usr/share/pulseaudio/alsa-mixer/paths/nokia-dfl61-twl4030-output-earpiece.conf
even more.

I changed the volume limit in line 32 from 17 to 18:

Before:
Code:
volume-limit = 17 # steps 0-18, 0: -24dB 12: 0dB 17: 10dB 18: 12dB
After
Code:
volume-limit = 18 # steps 0-18, 0: -24dB 12: 0dB 17: 10dB 18: 12dB
and the volume limit of the Element DAC2 Digital Fine to 100(line 56)

Before:
Code:
[Element DAC2 Digital Fine]
volume = 61
After:
Code:
[Element DAC2 Digital Fine]
volume = 100
Maybe this is helpful for someone.
Last edited by mautz; 2014-03-24 at 21:28.
 

The Following 3 Users Say Thank You to mautz For This Useful Post:
pmeuh is offline pmeuh
2014-03-26 , 19:12
Posts: 111 | Thanked: 63 times | Joined on Nov 2012 @ Kazakhstan
#28
mr666acdc & mautz: THANKS A LOT. You guys are legend !

I can now use my phone in loud environment such as Paris metro. Awesome! Ausgezeichnet!
 

The Following User Says Thank You to pmeuh For This Useful Post:
mautz is offline mautz
2014-03-28 , 09:09
Posts: 635 | Thanked: 1,535 times | Joined on Feb 2014 @ Germany
#29
To get the call volume a bit more louder again, edit the file
Code:
/usr/share/pulseaudio/alsa-mixer/paths/nokia-dfl61-twl4030-output-earpiece.conf
.

Change

Code:
[Element DAC2 Digital Coarse]
Volume = 1
to

Code:
[Element DAC2 Digital Coarse]
Volume = 2
Do not set it to 3, it will reset it to 1 again, only 1 and 2 are possible.
 

The Following 2 Users Say Thank You to mautz For This Useful Post:
Alexxxl's Avatar
Alexxxl is offline Alexxxl
2014-05-13 , 11:11
Posts: 152 | Thanked: 91 times | Joined on Mar 2013 @ Russia Saratov
#30
gathered a simple package.
If there are ideas on completion - will be glad to hear.

https://openrepos.net/content/alexxxlrus/volume
 

The Following 3 Users Say Thank You to Alexxxl For This Useful Post:
Reply
Page 3 of 3 12 3

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 01:47.

Contact Us - Home - Archive - Top