Active Topics

 


Reply
Thread Tools
Posts: 569 | Thanked: 462 times | Joined on Jul 2010 @ USA
#1
The screen on my N900 has had show up on it some areas that look like splotches of silver paint, but seem to be a thin film delaminating from the screen. A couple of tiny spots have flaked off, but otherwise it still seems to work.

Is this a layer delaminating from the screen?

Do I need to replace the digitizer? If so, can anyone recommend a source for a replacement digitizer?
 

The Following User Says Thank You to rotoflex For This Useful Post:
Posts: 46 | Thanked: 160 times | Joined on Jun 2010 @ Germany, Berlin
#2
I had the same effect on my N900, probably.

Fortunately, I had a defect N900 (with unrepairable SIM-card recognition error) in my drawer, so I could exchange the whole upper half with screen. This seems to be much easier than replacing the housing part (its like replacing the digitizer).

I cant provide you with a good source for buying a replacement. You might have seen this thread http://talk.maemo.org/showthread.php?t=88815 , which sounds like it is more kind of luck catching a good one (eBay or Alibaba and all the Watto's places).

But at least you are not alone with those delamination symptoms.

Cheers from Berlin
Ulle

Last edited by Ulle; 2014-07-31 at 13:58.
 

The Following 2 Users Say Thank You to Ulle For This Useful Post:
Fellfrosch's Avatar
Posts: 1,092 | Thanked: 4,995 times | Joined on Dec 2009 @ beautiful cave
#3
I've had the same problem. I think it's a hardening coat.
My solution: The layer came off with such an ease, that I used an adhesive tape to remove it completely. Afterwards i put an protection screen on. That works fine for over a year now.
 

The Following 4 Users Say Thank You to Fellfrosch For This Useful Post:
Posts: 304 | Thanked: 176 times | Joined on Oct 2009
#4
Originally Posted by rotoflex View Post
The screen on my N900 has had show up on it some areas that look like splotches of silver paint, but seem to be a thin film delaminating from the screen. A couple of tiny spots have flaked off, but otherwise it still seems to work.

Is this a layer delaminating from the screen?

Do I need to replace the digitizer? If so, can anyone recommend a source for a replacement digitizer?
I think this is an age-ing problem. I've had mine since launch and I never used a screen protector for 4 years. November of last year i started noticing this delamination occuring. That's when I finally decided to buy a screen protector to stop it from spreading further.
 

The Following User Says Thank You to jessi3k3 For This Useful Post:
Estel's Avatar
Posts: 5,028 | Thanked: 8,613 times | Joined on Mar 2011
#5
Originally Posted by Fellfrosch View Post
I've had the same problem. I think it's a hardening coat.
My solution: The layer came off with such an ease, that I used an adhesive tape to remove it completely. Afterwards i put an protection screen on. That works fine for over a year now.
Lucky. On one of my devices, a perfect non-scratched screen went totally fubar after applying - and removing - faulty screen protector. Part of coating went off, part remained where it was, overall, it looks worse than scratched. I would like to remove remnants of coating for at least having uniform surface, but the things seems rock-hard solid, and doesn't want to get off by any means short of sanding it, which doesn't sound like good solution.

Since then, I never use screen protectors that I don't trust already... (Even though I guess, that the coating must have been faulty already, to go off with silicone-glued, popularly called "glueless", screen protector...)

/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 

The Following User Says Thank You to Estel For This Useful Post:
Fellfrosch's Avatar
Posts: 1,092 | Thanked: 4,995 times | Joined on Dec 2009 @ beautiful cave
#6
There were some smaller parts which stuck to the screen. I used a soft wooden toothpick to rub them off. That worked quite well and all of the coating came off, without scratching the surface of the Screen.

I haven't used screen protectors before the coating pealed away.
 

The Following 2 Users Say Thank You to Fellfrosch For This Useful Post:
Reply

Tags
digitizer, nokia n900


 
Forum Jump


All times are GMT. The time now is 21:00.