Not yet, having trouble getting it to go past telnet 192.168.0.15 again... will keep trying

Okay so this is what i got..

ubuntu@ubuntu:~$ sudo flasher -k /home/ubuntu/Downloads/zImage_2.6.32.54-ubiboot-02_301013 -l -b
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 003, device address 010.
Device identifier: 357923040690689 (SN: N/A)
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_005
Sending kernel image (11672 kB)...
100% (11672 of 11672 kB, avg. 40389 kB/s)
Success
ubuntu@ubuntu:~$ telnet 192.168.0.15
Trying 192.168.0.15...
Connected to 192.168.0.15.
Escape character is '^]'.

/ # mount /dev/mmcblk0p2 /mnt/2
/ # ls -l /mnt/2/var/malf
ls: /mnt/2/var/malf: No such file or directory

USB drives are showing up now though this is what i get if i search MALF

Okay, looks like it is not the traditional MALF flag set, then.
Could be some other problem, most probably solvable by flashing the device.

Now that you can get the filesystem exports, you can back up your device to your computer and flash it clean.

I managed to fix my phone by re-flashing, thanks for your assistance and while i was at it i learnt a little bit about using the linux terminal, thanks!

Hello,

I was wondering if anyone can help, I am having the same issue, after having the n9 broken screen/touch replaced (phone sit in a drawer for 7 months)of course, battery dead, I charged the n9 to 10% via flasher, stopped that process, and kept charging in it the laptop for an hour more, and then reflashed to stock kernel, phone worked great for 24hs, and then the batter drained fast, and Its dead again, wont charge, or even start the cahrging process via flasher now, it stays at:
Suitable USB interface (bootloader/phonet) not found, waiting...

tried more than 50 times to charge it with the flasher, with Linux , and windows, on 2 diff PCs , 3 diff original cables still will not start the flashing process...I only see the led blinking briefly and I got the malf message for too frequent reboot 3 times...

any ideas ?

my dmesg shows this when plugging the phone to see if the flasher charges it:

Jul 3 12:35:05 crunchbang kernel: [10457.829103] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node ffff88013ae71ce0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
Jul 3 12:35:05 crunchbang kernel: [10457.829127] ACPI Error: Evaluating _BCM failed (20110623/video-364)
Jul 3 12:37:54 crunchbang kernel: [10626.541709] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x0000000000000064) is beyond end of object (20110623/exoparg2-418)
Jul 3 12:37:54 crunchbang kernel: [10626.541730] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node ffff88013ae7a8d0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
Jul 3 12:37:54 crunchbang kernel: [10626.541752] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node ffff88013ae71ce0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
Jul 3 12:37:54 crunchbang kernel: [10626.541777] ACPI Error: Evaluating _BCM failed (20110623/video-364)
Jul 3 12:41:04 crunchbang kernel: [10816.612467] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x0000000000000064) is beyond end of object (20110623/exoparg2-418)
Jul 3 12:41:04 crunchbang kernel: [10816.612480] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node ffff88013ae7a8d0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
Jul 3 12:41:04 crunchbang kernel: [10816.612494] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node ffff88013ae71ce0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
Jul 3 12:41:04 crunchbang kernel: [10816.612509] ACPI Error: Evaluating _BCM failed (20110623/video-364)
Jul 3 12:43:20 crunchbang kernel: [10952.869596] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x0000000000000064) is beyond end of object (20110623/exoparg2-418)
Jul 3 12:43:20 crunchbang kernel: [10952.869617] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node ffff88013ae7a8d0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
Jul 3 12:43:20 crunchbang kernel: [10952.869639] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node ffff88013ae71ce0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
Jul 3 12:43:20 crunchbang kernel: [10952.869661] ACPI Error: Evaluating _BCM failed (20110623/video-364)
Jul 3 13:07:21 crunchbang kernel: [12393.871481] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x0000000000000064) is beyond end of object (20110623/exoparg2-418)
Jul 3 13:07:21 crunchbang kernel: [12393.871501] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node ffff88013ae7a8d0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
Jul 3 13:07:21 crunchbang kernel: [12393.871523] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node ffff88013ae71ce0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
Jul 3 13:07:21 crunchbang kernel: [12393.871546] ACPI Error: Evaluating _BCM failed (20110623/video-364)

Think that I would have wanted to physically change the battery by now. What kernel were you using before as refer to "stock kernel" now and did you zeroise device before re-flashing?

Before I was using the kernel that allows inception to be installed.

After screen replace I flashed the normal image with -f -F option and wiped all my data as well to start from scratch and use the new aegis hack from coderus.

I will try to replace the battery, as it seems to be the only option left...

/home/ubuntu/Downloads/flasher_3.12.1_i386.deb
andreasole@andreasole:~$ sudo dpkg --install /home/ubuntu/Downloads/flasher_3.12.1_amd64.deb
dpkg: error processing archive /home/ubuntu/Downloads/flasher_3.12.1_amd64.deb (--install):
cannot access archive: No such file or directory
Errors were encountered while processing:
/home/ubuntu/Downloads/flasher_3.12.1_amd64.deb
andreasole@andreasole:~$ sudo --install /home/ubuntu/Downloads/flasher_3.12.1_amd64.deb
sudo: unrecognized option '--install'
usage: sudo -h | -K | -k | -V
usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user]
usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user]
[command]
usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p
prompt] [-u user] [VAR=value] [-i|-s] [<command>]
usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p
prompt] [-u user] file ...
andreasole@andreasole:~$ apt-get --install /home/ubuntu/Downloads/flasher_3.12.1_amd64.deb
E: Command line option --install is not understood in combination with the other options
andreasole@andreasole:~$


i dont underastand what is wrong, iam on ubuntu 16.4 thanks

i also try this
sudo dpkg -i /home/ubuntu/Downloads/flasher_3.12.1_i386.deb
[sudo] password for andreasole:
dpkg: error processing archive /home/ubuntu/Downloads/flasher_3.12.1_i386.deb (--install):
cannot access archive: No such file or directory
Errors were encountered while processing:
/home/ubuntu/Downloads/flasher_3.12.1_i386.deb

sudo launches command with escalated priviliges, username(or command) must be mentioned in sudoers file(directly, or indirectly via group)

dpkg is debian package manager

dpkg -i archive.deb (if you are root)
sudo dpkg -i archive.deb (if you are normal user under ubuntu)

maybe you got 32bit system, paste output of 'uname -a' and 'file *.deb', because for some reason dpkg doesnt recognize this.archive(maybe try to redownload it)