Page 2 of 2 1 2
Reply
Thread Tools
sixwheeledbeast is offline sixwheeledbeast
2015-08-25 , 19:38
Posts: 2,292 | Thanked: 4,135 times | Joined on Apr 2010 @ UK
#11
You didn't explain in your OP that you knew about this!
You also say that you are using SR and ideal voltages together which means SR will not work correctly.
Just because it's worked fine for 6 months, doesn't mean everything is fine and the CPU won't throw it's hand in tomorrow.

Just trying to stop another N900 from dying a horrible death...
__________________

Wiki Admin
sixwheeledbeast's wiki
Testing Squad Subscriber
- mcallerx - tenminutecore - FlopSwap - Qnotted - zzztop - Bander - Fight2048 -


Before posting or starting a thread please try this.
 
Ridd92 is offline Ridd92
2015-08-25 , 20:07
Posts: 188 | Thanked: 223 times | Joined on Apr 2013 @ Poland
#12
Originally Posted by sixwheeledbeast View Post
Also SR and custom voltages MUST NOT be used together.
Ok, about that, I never heard of it, but if so, what voltage profile should I use? XLV? ULV?

I don't want to fry my n900 either just want to know how is this, that some devices (At least mine) can handle SR with freqs above 900mhz?
 
sixwheeledbeast is offline sixwheeledbeast
2015-08-25 , 21:01
Posts: 2,292 | Thanked: 4,135 times | Joined on Apr 2010 @ UK
#13
It's mostly covered here.
http://wiki.maemo.org/Overclocking

Hopefully you have a backup of the stock kernel-config profile and you can load that and set as default.

If you wish to use >900Mhz you should use "Manual undervolting (legacy)" instructions with SR disabled.

If you are ok with <=900Mhz enable SR and use the stock profile.
__________________

Wiki Admin
sixwheeledbeast's wiki
Testing Squad Subscriber
- mcallerx - tenminutecore - FlopSwap - Qnotted - zzztop - Bander - Fight2048 -


Before posting or starting a thread please try this.
 

The Following User Says Thank You to sixwheeledbeast For This Useful Post:
Ridd92 is offline Ridd92
2015-08-26 , 06:45
Posts: 188 | Thanked: 223 times | Joined on Apr 2013 @ Poland
#14
Originally Posted by sixwheeledbeast View Post
It's mostly covered here.
http://wiki.maemo.org/Overclocking

Hopefully you have a backup of the stock kernel-config profile and you can load that and set as default.
Not my first time at linux, everything is covered

Originally Posted by sixwheeledbeast View Post
If you wish to use >900Mhz you should use "Manual undervolting (legacy)" instructions with SR disabled.

If you are ok with <=900Mhz enable SR and use the stock profile
I can work with lower than 900mhz, 850 is fine and not so power-consume than 950 or 1000mhz.

I'm going to re-flash my device today, after that I will have on mind what you said.

Also, by stock voltage you mean nokias?
 
Reply
Page 2 of 2 1 2

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 02:04.

Contact Us - Home - Archive - Top