I guess you cannot do that in sailfish, you have to flash back to Android.

The main issue here is not messing up partition 51 or 52, I agree with you that those can be (more or less) restored easily. Another option here could be to reflash the whole image (or even restore Android with EMMA and then flashing SFOS again).
However, the biggest issue here are probably all those other partitions which contain crucial data for some hardware components. As I understood it when this topic was discussed in the second-to-last community meeting, some of those partitions can't be restored and you hard-brick the device when they are removed / damaged. So f***ing up the whole partition table (or at least making the slightest mistake during its restoration) could FUBAR (f*** up beyond all repair) your phone.

We also need to keep in mind that "moderately safe" or even "unlikely events" are not safe enough for Jolla to deploy an automated process with the possibility to completely brick the device.

Does any one know if the browser and email client will be improved in regards to general UI speed within the next year?

Is there a way to get rid of the warning screen on the start up?

yes, flash stock Sony Android.

Joke aside
no, there is no known way of removing that warning.

The non-joke way to remove the warning screen would require Jolla to get their boot image (the hybris-boot.img file with the kernel+initrd that gets flashed on the boot partition) signed by Sony's key.

Or alternatively, to get their own certificate admitted into the Xperia X's bootloader.

And then, re-locking the bootloader.

Seems like with the new string being translated for 2.1.4 we might have another update before Christmas which would be a nice

Been unusually busy lately, but I haven't fallen off the face of the Earth (or blasted off to test the spherical vs. flat argument).

<long story alert>

In fact, I've gotten an Xperia X to try the official Sailfish X on. I'd been using a Oneplus X with a community SFOS build, and really liked it. Unfortunately, its support for US frequency bands is incomplete, so it's voice and data QOS is a problem in some places -- one of which is my house. So on the Experia bandwagon I hop!

Backing up the Digital Restrictions Management stuff turned out to be a bigger PITA than I'd expected, and began to look like it was gonna take more time than the device sells for at the hourly rate I bill my free time to myself. So it's SFOS all the way for me! (If I ever need to part with the phone, I'm sure someone here would like it at a very reasonable price with Sailfish installed.)

I miss the double-tap to wake. Hopefully that gap will be filled soon. Also miss the display-off gestures, particularly to start the camera and the flashlight. But the biggest regression from the OnePlus community build is the SD card support. On the OnePlus X, I was able to use any SD card I tried, including a 64GB card with the exfat support from OpenRepos, but with Sailfish X I found that all my cards 32GB and bigger -- fat32 or exfat -- fail with dmesg errors about "tuning". I see that's apparently a kernel issue with the build and certain SD cards related to timing and transfer speed, etc.

</long story>

But now, something I hope someone has some insight on. I was able to use a 16GB fat32 card -- for a while. I installed a few apps, including SSHFS support to copy my backup off the other device -- so far so good. Then I tried the exfat tools, including bleeding edge SD card tools. Once I installed the bleeding edge sd-utils, the 16GB card wouldn't mount, automagically or manually. I removed bleeding edge sd-utils and replaced it with stock, and 16GB SD card was back.

Again -- so far, so good.

So I restored the backup from SD card and went on to install a bunch of my favorite apps. Somewhere along the way, the 16GB SD card disappeared again. It's okay in other devices and on the Ubuntu PC, so I don't think it's a hardware failure. Instead, I suspect that something I installed in the meantime has caused the issue. I've tried uninstalling a few things and retrying the SD card, but I haven't found a culprit. I've searched here and on TJC, but haven't found another report of this behavior. As of now, I can't seem to use any SD I have of any size or format.

If anyone's got any ideas on this, I love to hear them . . .

robthebold,

I don't have the answer, but suspect microsd support is behind this issue on X https://together.jolla.com/question/...g-grey-photos/

I have noticed ext4 errors in dmesg. Repairing ext4 on a desktop and using the card in J1 and the card works fine. Back in the X it works initially, then the ext4 errors appear again. Presumably need a newer kernel or to try a different card.

Rich

I enabled double-tap to wake shortly after installing Sailfish X, using this method. It works about as well as it did on the OnePlus X, except that occasionally the proximity sensor seems to get confused and the screen won't unlock unless you cover the proximity sensor and uncover it again. Battery life is decent, over two days with double tap enabled, wifi on, and bluetooth on and connected.