Active Topics

 


Page 21 of 44 « First 111920 21 222331 Last »
Reply
Thread Tools
juz is offline juz
2020-04-04 , 21:39
Posts: 53 | Thanked: 146 times | Joined on Apr 2012 @ Australia
#201
I too have had some issues installing Flatpak support on my xperia X running 3.3.
At the completion of installing both angelfish and telegram-desktop my device immediately rebooted. Angelfish runs, though with a little lag, so I assume that completed successfully. I haven't managed to start telegram though.
I too have no desktop icon for angelfish or telegram following installation.
Not sure what other information I can provide to assist.
Thanks very much .
 

The Following 3 Users Say Thank You to juz For This Useful Post:
eson's Avatar
eson is offline eson
2020-04-05 , 05:54
Posts: 363 | Thanked: 1,375 times | Joined on Nov 2015 @ Sweden
#202
Just want to report that I got flatpak support and Angelfish up and running on my Xperia X, with no problem at all.
Thanks, @rinigus!
 

The Following 3 Users Say Thank You to eson For This Useful Post:
rinigus is offline rinigus
2020-04-05 , 07:06
Posts: 1,414 | Thanked: 7,547 times | Joined on Aug 2016 @ Estonia
#203
These reports are rather confusing. @eson, thanks for telling that it worked - this makes me to dig deeper.

For users with reboots, missing icons. Please provide output of the following commands. Run those via ssh in PC, so you could paste the output and not make screenshots.

Code:
flatpak list --user
flatpak list --system
du -sh ~/.local/share/flatpak/
ls -l ~/.local/share/applications
When you start flatpak-runner from terminal WITHOUT any other options, do you see installed apps listed in flatpak-runner window?

Looks like your issues are reproducible, so I presume output of one is sufficient. Others, please check if you have the same as the reported one, when we get there.

As for gdk_... , I don't know and can look into it when OBS 3.3 is up
 

The Following 3 Users Say Thank You to rinigus For This Useful Post:
coderus's Avatar
coderus is offline coderus
2020-04-05 , 08:13
Posts: 6,436 | Thanked: 12,701 times | Joined on Nov 2011 @ Ängelholm, Sweden
#204
in russian sfos telegram chat i've seen users ran into issues with flatpaks by issuing flatpak command as root user.
__________________
Telegram | Openrepos | GitHub | Revolut donations
 

The Following 4 Users Say Thank You to coderus For This Useful Post:
juz is offline juz
2020-04-05 , 08:28
Posts: 53 | Thanked: 146 times | Joined on Apr 2012 @ Australia
#205
Hi Rinigus,
Thanks for all the development and thanks for looking into this.
Following your list of commands I end up with the following:
Code:
,---
| Sailfish OS 3.3.0.14 (Rokua)
'---
[nemo@Sailfish ~]$ flatpak list --user
Name                Application ID                       Version Branch Origin
default             org.freedesktop.Platform.GL.default          19.08  flathub
ffmpeg-full         org.freedesktop.Platform.ffmpeg-full         19.08  flathub
KDE Application Pl? org.kde.Platform                             5.14   flathub
Maliit plugin for ? ?tformInputContexts.MaliitSailfishOS         5.14   flathub
Angelfish Webbrows? org.kde.mobile.angelfish                     master kdeapps
Telegram Desktop    org.telegram.desktop                 2.0.1   stable flathub
[nemo@Sailfish ~]$ flatpak list --system
[nemo@Sailfish ~]$ du -sh ~/.local/share/flatpak/
984.3M	/home/nemo/.local/share/flatpak/
[nemo@Sailfish ~]$ ls -l ~/.local/share/applications
total 4
lrwxrwxrwx    1 nemo     nemo            32 Nov  4  2018 defaults.list -> /home/nemo/.config/mimeapps.list
-rw-rw-r--    1 nemo     nemo            50 Feb  5 21:10 mimeapps.list
[nemo@Sailfish ~]$ flatpak-runner
Starting empty Wayland server and enabling settings
[D] unknown:0 - Using Wayland-EGL
Wayland socket: ../../display/wayland-1
[D] onCompleted:424 - Warning: specifying an object instance for initialPage is sub-optimal - prefer to use a Component
[D] unknown:0 - Got library name:  "/usr/lib/qt5/qml/io/thp/pyotherside/libpyothersideplugin.so"
I see simply "Default settings" in Flatpak Runner after launching it from terminal.

This is all using 3.3.0.14 SFOS on Xperia X. For what is worth the native email app is also incredibly laggy after update, so maybe something deeper is wrong with my phone. Have to look at that seperately.

Thanks again for your help,
Justin.
 

The Following 3 Users Say Thank You to juz For This Useful Post:
rinigus is offline rinigus
2020-04-05 , 11:21
Posts: 1,414 | Thanked: 7,547 times | Joined on Aug 2016 @ Estonia
#206
That looks like all is installed correctly. I suggest to uninstall angelfish and telegram. After that, run

flatpak repair --user

and install Angelfish only. It should not reboot, btw.

Would that help?
 

The Following 3 Users Say Thank You to rinigus For This Useful Post:
juz is offline juz
2020-04-05 , 11:35
Posts: 53 | Thanked: 146 times | Joined on Apr 2012 @ Australia
#207
Hi Rinigus,
Thanks for your help.
I started following your instructions, I started by uninstalling angelfish, and the Xperia X rebooted itself. Here is the terminal:
Code:
[nemo@Sailfish ~]$ flatpak uninstall --user angelfish
Found installed ref ?app/org.kde.mobile.angelfish/arm/master? (user). Is this correct? [Y/n]: y


        ID                              Branch        Op
 1. [-] org.kde.mobile.angelfish        master        r

Uninstalling?
After that the phone rebooted.
I shall keep going?

Thanks,
 

The Following 2 Users Say Thank You to juz For This Useful Post:
juz is offline juz
2020-04-05 , 11:37
Posts: 53 | Thanked: 146 times | Joined on Apr 2012 @ Australia
#208
Uninstall of telegram resulted in the same behaviour.
 

The Following 2 Users Say Thank You to juz For This Useful Post:
rinigus is offline rinigus
2020-04-05 , 11:40
Posts: 1,414 | Thanked: 7,547 times | Joined on Aug 2016 @ Estonia
#209
Try still to uninstall and then repair before installing again. Reboot sounds as a bug of SFOS or flatpak. But let's see where you get
 

The Following 2 Users Say Thank You to rinigus For This Useful Post:
juz is offline juz
2020-04-05 , 11:57
Posts: 53 | Thanked: 146 times | Joined on Apr 2012 @ Australia
#210
I issued the uninstall command for both angelfish and telegram as I noted above. Both resulted in a restart.
On following the repair and reinstall of Angelfish I found the following:
Code:
[nemo@Sailfish ~]$ flatpak repair --user
Working on the user installation at /home/nemo/.local/share/flatpak
Verifying deploy/runtime/org.kde.PlatformInputContexts.MaliitSailfishOS/arm/5.14?
Verifying deploy/runtime/org.kde.Platform.Locale/arm/5.14?
Verifying flathub:runtime/org.kde.PlatformInputContexts.MaliitSailfishOS/arm/5.14?
Verifying flathub:runtime/org.kde.Platform/arm/5.14?
Verifying deploy/app/org.kde.mobile.angelfish/arm/tmp.ELgD0A?
Verifying deploy/runtime/org.freedesktop.Platform.GL.default/arm/19.08?
Verifying deploy/runtime/org.freedesktop.Platform.ffmpeg-full/arm/19.08?
Verifying deploy/runtime/org.kde.Platform/arm/5.14?
Verifying kdeapps:app/org.kde.mobile.angelfish/arm/master?
Verifying deploy/app/org.telegram.desktop/arm/tmp.bD8Zsm?
Verifying flathub:runtime/org.freedesktop.Platform.GL.default/arm/19.08?
Verifying flathub:runtime/org.kde.Platform.Locale/arm/5.14?
Verifying flathub:app/org.telegram.desktop/arm/stable?
Verifying flathub:runtime/org.freedesktop.Platform.ffmpeg-full/arm/19.08?
Pruning objects
[nemo@Sailfish ~]$ flatpak install --user angelfish
Looking for matches?
Usage: gpg-connect-agent [options] (-h for help)Usage: gpg-connect-agent [options] (-h for help)Found similar ref(s) for ?angelfish? in remote ?kdeapps? (user).
Use this remote? [Y/n]: y
Found ref ?app/org.kde.mobile.angelfish/arm/master? in remote ?kdeapps? (user).
Use this ref? [Y/n]: y
Skipping: org.kde.mobile.angelfish/arm/master is already installed
[nemo@Sailfish ~]$
So I think the uninstall must not have completed prior to reboot.
The device has not suffered from reboots at any other stage in it's life.

There is still no icon, and still just "Default settings" in Flatpak Runner.
 

The Following 2 Users Say Thank You to juz For This Useful Post:
Reply
Page 21 of 44 « First 111920 21 222331 Last »

Tags
flatpak

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 09:15.

Contact Us - Home - Archive - Top