I ran into a problem (multiple actually) while trying to get Sailfish on my new Fairphone.

Steps taken :

1. Buy and receive new Fairphone2
2. Boot it once or twice to it's stock Android
3. Run the proximity sensor calibration item in the configuration settings
4. Continue with the steps from https://wiki.merproject.org/wiki/Ada...fishOS_for_fp2
5. Download http://storage.googleapis.com/fairph...5.1-manual.zip
6. fastboot flash modem ./BP/NON-HLOS.bin
7. fastboot flash system system.img
8. fastboot flash recovery recovery.img
9. fastboot reboot
10. See that device no longer boots and just says "loading"
11. Notice that going to TWRP using volume up just makes my screen blue
12. Download newest TWRP from https://eu.dl.twrp.me/FP2/twrp-3.2.1-0-FP2.img.html
13. fastboot flash recovery twrp-3.2.1-0-FP2.img
14. fastboot reboot
15. Notice I can now get to twrp, no longer blue
16. Notice twrp won't mount my SD card
17. reformat SD card to FAT32 on a 10GB partition (because Windows)
18. Click install in TWRP, choose the zip file for Sailfish downloaded earlier
19. Wait until finished and reboot
20. See just the fairphone logo and rebooting after about a minute back to recovery...

I think I made a mistake and should have used the system and recovery from the other zip file linked at the page https://storage.googleapis.com/fairp...3.1-manual.zip so I will flash those now and see if that helps...

But I'm annoyed at the lack of visibility of the boot process errors...

EDIT : nvm it works now - flashing the right system & recovery did the trick. I haven't checked if the recovery is still twrp now...

One remark for the guide - I don't know who or where to put this so the right people see it - it says : "Also the other partitions (except modem and boot partitions) can be flashed (rpm, sbl1, tz, splash and aboot) can be flashed " and about ten lines higher it says "Only flash system.img and recovery.img. DO NOT flash other partitions. " ... I think there's a copy paste error there? It seems a contradiction.

It does crash a lot...
Once while I was messing around with the camera and film roll, once while I was adding a contact (I didn't completely reboot but the GUI seemed to have crashed or something) and I think once more but I forgot what I was doing.
Also I've noticed I can't shut it down...it says goodbye but then it reboots everytime?

It is the newest camera module upon FP2 which causes this issue with both SailfishOS and LineageOS as here:https://jira.lineageos.org/browse/BUGBASH-1287

I'll try to find appropriate link appertaining to Fairphone later, but don't find this "discourse" forum very user-friendly to navigate through.

As promised here is appropriate forum.fairphone link:
https://forum.fairphone.com/t/sailfi...lease/38493/41

Is there a link for the sailfish image?

https://wiki.merproject.org/wiki/Ada...fishOS_for_fp2

Or i misunderstood the wiki?

Where get i the required .zip

Mal the Sailfish porter maintainer has had problems with image hosting provider, so you will find upon wiki resource he says "Please ask for image link from mal at Freenode IRC"