Active Topics
-
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (3)
to SailfishOS by edp17 - 22 mins ago -
The N900 is now 15 years old! (6)
to Nokia N900 by Macros - 1 day, 4 hrs ago -
F(x)tec Pro1x (QWERTY) for sale (0)
to Buy & Sell by aln00000 - 1 day, 17 hrs ago -
n770 youtube video (0)
to General by nmdv - 5 days, 16 hrs ago - more...
|
2022-01-23
, 12:02
|
|
Posts: 4 |
Thanked: 2 times |
Joined on Jan 2022
|
#52
|
Originally Posted by aspergerguy
I am located in Germany, so Polarcell may be an option. Thanks for this suggestion.
Don't know where in the world you are, but have you considered trying Akku Polarcell equivalent for N9/Lumia 800?
Whilst it is a bit tedious never found particularly onerous to use Ctrl -c to terminate flasher a minute or so after reaching 10% battery. How long are you leaving the 3.3V on charge (pulsing white LED) before attempting booting?
Personally wouldn't have any qualms about flashing firmware as in my experience only had two dead N9 unable to recover, which was caused by not unusual EMMC failure with time. When you say battery not strong enough to "fully boot", I was wondering what you have to lose here by not flashing.
The problem with my "new" spare battery is, that it is going from low to 100% while charging very fast. So the flasher more or less started flashing immediately. I was not really sure, if the battery holds enough juice for the flashing. Ctrl-C wasn't really possible.
At the moment, the only way to get the battery charged somewhat is this method (https://talk.maemo.org/showpost.php?...8&postcount=14) after trying a really lot of things before.
Whilst it is a bit tedious never found particularly onerous to use Ctrl -c to terminate flasher a minute or so after reaching 10% battery. How long are you leaving the 3.3V on charge (pulsing white LED) before attempting booting?
Personally wouldn't have any qualms about flashing firmware as in my experience only had two dead N9 unable to recover, which was caused by not unusual EMMC failure with time. When you say battery not strong enough to "fully boot", I was wondering what you have to lose here by not flashing.