Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean)

First I would like to thank mal, elros34, vlad and all the Sailfish OS porter guys who helped me to make this port.
Thank you very much guys!

News 07/10/2024: SFOS 4.6.0.15

Requirements:
Before you start to download anything, please read all this through carefully.
The first requirement is your device must be rooted and you should be able to boot into a custom recovery (preferably TWRP).

Installation instructions:
1. Download all files, LOS17.1 zip, Sailfish OS zip to the external SD card on the phone
2. Download twrp-3.7.0_11-0-ocean.img on your host PC
3. Reboot into bootloader (Hold buttons: Power on + Volume down)

Once the device booted into bootloader, connect it to your PC
Once connected boot into TWRP: on your host execute: fastboot boot twrp-3.7.0_11-0-ocean.img

4. Do a factory reset
5. Format data to remove any encryption or other residues
6. Still in recovery, flash the LOS17.1 image
7. Still in recovery, flash Sailfish Os image
8. Reboot
9. Enjoy the latest (4.6.0.15) Sailfish OS on your Moto G7 Power (ocean).

This Sailfish OS Android HAL is based on LOS 17.1.


Downloads:

• twrp-3.7.0_11-0-ocean.img for MotoG7 Power (ocean)
• LOS17.1 for MotoG7 Power (ocean)
• Sailfish OS 4.6.0.15 for MotoG7 Power (ocean) - 07/10/2024

Debug/login/troubleshooting:
In Ubuntu, connect USB cable. telnet 192.168.2.15 2323 or SSH defaultuser@192.168.2.15.

How to make a backup/restore with TWRP:
You can boot into TWRP with instruction above and can make backup/restore.

Battery life
In my experience this build gives a very good battery life (In my tests it drops around 5% overnight with wifi on)

Changelog:

07.10.2024
=========
Work:

• Screen
• Touch
• IMEI number detection
• Sensors
• GPS
• Notification LED (white)
• Wifi
• USB modes (Developer mode, MTP mode, Charging only mode)
• Bluetooth
• Calls incoming/outgoing
• Messages incoming/outgoing
• Mobile data
• External SD card detected and mounted to /run/media/nemo/_sdcard_name_ (where _sdcard_name_ is the name of the sd card when it was formatted like 4B93-785B)
• Vibra
• Pixel ratio and icons set to 1.25
• Audio is routed to headphone if that presents
• Sound adjusting with volume rockers
• Apps do start (Firejail/Sailjail)
• Charging icon displayed properly
• Camera front/rear (picture & video recording)
• Video recording (only on the front camera)
• Jolla store
• Torch
• Audio
• OTA update
• LXC container (I've tested with installing Debian Bookworm in it)
• Waydroid (Los 18.1) (please see details here)

Do not work:

• The device only boot into TWRP with fastboot
• Fingerprint scanner

Extras:

• If you want to mount network drive (NAS), install cifs-utils. It's available in device repo, so in Fingerterm execute: devel-su zypper in cifs-utils
• Desktop Linux distro install/run on the MotoG7 Power:
  Just follow the instruction here Install Debian Bookworwm in LXC
• Install less outdated firefox engine: Replace esr78 with esr91
• Install better fonts: High DPI setup aka PixelPerfect by dumol
• Display Weather forecast on lock screen:
  - Enable weather on lock-screen (on sfos 4.6 it is disabled by default):
  Code:

  dconf write /desktop/lipstick-jolla-home/force_weather_loading true

  - Install MeeCast, MeeCast daemon and MeeCast Event and add a city

Install PixelPerfect by Dumol:

• Download and unpack in $HOME the PixelPerfect-hidpi-0.4beta2.tar.gz released archive
  
  Code:

  cd ~
  curl -LO https://github.com/dumol/PixelPerfect/releases/download/v0.4.0beta2/PixelPerfect-hidpi-0.4beta2.tar.gz
  tar xvfz PixelPerfect-hidpi-0.4beta2.tar.gz

• Amend pixel ratio & icon size
  
  Code:

  devel-su sed -i 's/theme_pixel_ratio$/theme_pixel_ratio_RENAMED/' /etc/dconf/db/vendor.d/locks/silica-configs.txt
  devel-su dconf update
  dconf write /desktop/sailfish/silica/theme_pixel_ratio 1.1
  dconf write /desktop/sailfish/silica/icon_size_launcher 110.0

• Set Asap font
  In ~/.config/fontconfig/os/sfos.conf instead of Barlow and its fallbacks, set Asap as UI font (falling back to Roboto and Arimo).
  Also, in Settings->Display->Text Size, "normal" is now actually "small", and you have to set "large" to get "normal" text sizes.
  The only known downside to this change of theme pixel ratio: the “diallers” in the Phone app and the locked screens looking a bit more cramped than they should.
  
• Restart homescreen

Source: High DPI setup See steps 2 & 6.

Video recording has fixed. Link has updated to the new build.

I've managed to make Waydroid (18.1) working on the device.

For now it only can be installed with some manual work (I recommend to copy/paste commands in a terminal from PC via ssh, rather than using Fingerterm).
Here is the instruction to follow.

1, Upgrade Sailfish Os configs and kernel for Waydroid support:
[code]devel-su zypper ref
devel-su zypper up
devel-su reboot[code]

2. Install Waydroid and required packages
(Be able to install all of these you'll need Chum repo added and this command will install many other required packages. For getting Chum repo please see first step of this post.)

3. Mask dnsmasq service
4. Initialize Waydroid
(This will download and extract latest 18.1 system and vendor images, be patient)

5. Download, rename and replace vendor.img
Download this file: vendor.img for 18.1
Once you downloaded, rename vendor181.img it to vendor.img and as root move it into /home/waydroid/images/
(Overwrite the vendor.img in there. This step is required for be able to use the device graphics drivers and camera within Waydroid)

6. Amend some configurations

6.1. Add real graphics drivers. In /home/waydroid/waydroid_base.prop, add these two lines
6.2. Amend binders in /etc/gbinder.d/anbox-hybris.conf. The content of this file should be:
6.3. Amend binders in /home/waydroid/waydroid.cfg:
Look for binder, vndbinder and hwbinder lines and amend them to look like this:
Also in this file double check the protocols which must be aidl3:
6.4. Amend binders in /home/waydroid/lxc/waydroid/config_nodes:
Look for mount entries dev/binder, dev/vndbinder and dev/hwbinder and amend the lines to be like:
6.5. Turn off lxc.apparmor.profile in /home/waydroid/lxc/waydroid/config:
comment out this line:
7. Reboot and then go into Settings / Waydroid. Tap on the "Start daemon" button. Wait for a few secs and if it becomes and stays greyed out, then from app grid, tap on the Waydroid icon.
(In here Settings / Waydroid, you can turn on the "Start Waydroid session on bootup" option. This way, after each boot, you only need to tap on the Waydroid icon and it should start.
After boot, shortly after Lipstick is started, my device briefly vibrates which means Waydroid has completed to start.
If you tap on Waydroid icon before the vibration you'll see Waydroid boot animation, otherwise you'll get the homescreen straight away.

Good luck and let me know if you bump into problems and/or has any questions.