Active Topics
-
Camera phone competition March 2023 "Endless" (35)
to General by Maemish - 1 day, 11 hrs ago -
TLS 1.2 for N9 is ready (28)
to MeeGo / Harmattan by smartblu9 - 1 day, 12 hrs ago -
Maemo repository (3)
to Community by torsen - 2 days, 4 hrs ago -
Error after installing Leste on sdcard (11)
to Maemo 7 / Leste by Maemish - 3 days, 1 hr ago -
Introducing ubiboot N9 (multiboot OS loader) (1,393)
to Alternatives by smatkovi - 4 days, 8 hrs ago - more...
 |
Benson |
2008-02-18
, 19:42
|
|
Posts: 4,930 |
Thanked: 2,272 times |
Joined on Oct 2007
|
#41
|
Originally Posted by pipeline
You consider using tar? That seems a more natural choice to me...
|
|
2008-03-16
, 20:34
|
|
Posts: 10 |
Thanked: 0 times |
Joined on Mar 2008
|
#42
|
Hello guys. I'm another lucky man which can't launch usb cdrom on my n800 tablet.
I've tried 1st time using attached *.deb file, after installation i rebooted device and attach cdrom, then there were two messages the first is that usb device is not supported and the that file system is not supported. After that i ran following commands and got following answers
/home/user # mount /dev/scd0 /root/mnt -t iso9660
mount: mounting /dev/scd0 on /root/mnt failed
/home/user # mount /dev/scd0 /root/mnt -t udf
mount: mounting /dev/scd0 on /root/mnt failed
At second attempt i reupdate software os2008 and launched *.ko files from the command line. The result was the same as in my first attempt.
.
PS I use cd rom Samsung Writemaster SE-TO84L.
Could you pls give me some recommendations?
I've tried 1st time using attached *.deb file, after installation i rebooted device and attach cdrom, then there were two messages the first is that usb device is not supported and the that file system is not supported. After that i ran following commands and got following answers
/home/user # mount /dev/scd0 /root/mnt -t iso9660
mount: mounting /dev/scd0 on /root/mnt failed
/home/user # mount /dev/scd0 /root/mnt -t udf
mount: mounting /dev/scd0 on /root/mnt failed
At second attempt i reupdate software os2008 and launched *.ko files from the command line. The result was the same as in my first attempt.
.
PS I use cd rom Samsung Writemaster SE-TO84L.
Could you pls give me some recommendations?
|
|
2008-03-18
, 18:50
|
|
Posts: 55 |
Thanked: 6 times |
Joined on Feb 2008
|
#43
|
Help! I'm having problems installing modules. When I type "insmod cdrom.ko", I'm getting "no such file or directory. Ditto for "insmod /mnt/initfs/lib/modules/2.6.21-omap1/cdrom.ko. Of course I'm root. Where are these modules located? Of course I've installed the cdrom.deb (dkpg -i cdrom.deb) as root.
Thanks in prior to all of your help!
Thanks in prior to all of your help!
__________________
**************************************
My N800: OS2008, Fanoush's initfs, SanDisk 4Gig x 2 SDHC, BoxWave FlexSkin and Sync Charger, Homebrew External Power Pack (4xAA NiMH Rechargeable 2400 mA)
Greetings from Sunny San Diego, California!
**************************************
My N800: OS2008, Fanoush's initfs, SanDisk 4Gig x 2 SDHC, BoxWave FlexSkin and Sync Charger, Homebrew External Power Pack (4xAA NiMH Rechargeable 2400 mA)
Greetings from Sunny San Diego, California!
|
|
2008-03-22
, 07:18
|
|
Posts: 15 |
Thanked: 2 times |
Joined on Dec 2007
|
#44
|
cdrom.ko and other modules located in this folder:
/usr/lib/
but it's no help for me :-)
The .deb is no work for me.
/sorry for my bad english/
/usr/lib/
but it's no help for me :-)
The .deb is no work for me.
/sorry for my bad english/
|
|
2008-03-28
, 07:57
|
|
Posts: 169 |
Thanked: 12 times |
Joined on Dec 2007
@ Tehran-Iran
|
#45
|
did u installed cdrom.deb? has it an icon for menu?
__________________
N800 With 2 SDHC CARD's 12 and 4 GB
But Thinking About A 64 GB !!!!
Os 2008 Chinook,I Have't Trust To Diablo!??
N800 With 2 SDHC CARD's 12 and 4 GB
But Thinking About A 64 GB !!!!
Os 2008 Chinook,I Have't Trust To Diablo!??
 |
|
2008-03-29
, 15:44
|
|
Posts: 3,096 |
Thanked: 1,525 times |
Joined on Jan 2006
@ Michigan, USA
|
#46
|
If this is not working for you? Please provide some output.
dmesg is a command you can run from xterm to get information about whats happening when you plug in the CDROM/DVD
If you installed the deb, you do not need to reboot or do anything you should be good.
make sure the proper modules are loaded, from xterm run:
cat /proc/modules
Please paste your output for:
dmesg
and
cat /proc/modules
dmesg is a command you can run from xterm to get information about whats happening when you plug in the CDROM/DVD
If you installed the deb, you do not need to reboot or do anything you should be good.
make sure the proper modules are loaded, from xterm run:
cat /proc/modules
Please paste your output for:
dmesg
and
cat /proc/modules
__________________
To all my Maemo friends. I will no longer be monitoring any of my threads here on a regular basis. I am no longer supporting anything I did under maemo at maemo.org. If you need some help with something you can reach me at tablethacker.com or www.facebook.com/penguinbait. I have disabled my PM's here, and removed myself from Council email and Community mailing list. There has been some fun times, see you around.
To all my Maemo friends. I will no longer be monitoring any of my threads here on a regular basis. I am no longer supporting anything I did under maemo at maemo.org. If you need some help with something you can reach me at tablethacker.com or www.facebook.com/penguinbait. I have disabled my PM's here, and removed myself from Council email and Community mailing list. There has been some fun times, see you around.
|
|
2008-03-29
, 15:46
|
|
Posts: 3,096 |
Thanked: 1,525 times |
Joined on Jan 2006
@ Michigan, USA
|
#47
|
Originally Posted by italodance
There is no icon for this
did u installed cdrom.deb? has it an icon for menu?
__________________
To all my Maemo friends. I will no longer be monitoring any of my threads here on a regular basis. I am no longer supporting anything I did under maemo at maemo.org. If you need some help with something you can reach me at tablethacker.com or www.facebook.com/penguinbait. I have disabled my PM's here, and removed myself from Council email and Community mailing list. There has been some fun times, see you around.
To all my Maemo friends. I will no longer be monitoring any of my threads here on a regular basis. I am no longer supporting anything I did under maemo at maemo.org. If you need some help with something you can reach me at tablethacker.com or www.facebook.com/penguinbait. I have disabled my PM's here, and removed myself from Council email and Community mailing list. There has been some fun times, see you around.
|
|
2008-03-29
, 16:26
|
|
Posts: 10 |
Thanked: 0 times |
Joined on Mar 2008
|
#48
|
Hi. i've just launched following commands in xterm and got next result.
/home/user # cd /usr/lib
/usr/lib # cat /proc/modules
udf 84964 0 - Live 0xbf077000
isofs 32092 0 - Live 0xbf06e000
sr_mod 13444 0 - Live 0xbf069000
sg 21592 0 - Live 0xbf062000
cdrom 35164 1 sr_mod, Live 0xbf058000
g_file_storage 27560 0 - Live 0xbf050000
cx3110x 56200 0 - Live 0xbf041000
umac 258788 1 cx3110x, Live 0xbf000000 (P)
/usr/lib # dmegs
/bin/sh: dmegs: not found
Could you pls explain what I'm doing wrong?
/home/user # cd /usr/lib
/usr/lib # cat /proc/modules
udf 84964 0 - Live 0xbf077000
isofs 32092 0 - Live 0xbf06e000
sr_mod 13444 0 - Live 0xbf069000
sg 21592 0 - Live 0xbf062000
cdrom 35164 1 sr_mod, Live 0xbf058000
g_file_storage 27560 0 - Live 0xbf050000
cx3110x 56200 0 - Live 0xbf041000
umac 258788 1 cx3110x, Live 0xbf000000 (P)
/usr/lib # dmegs
/bin/sh: dmegs: not found
Could you pls explain what I'm doing wrong?
 |
|
2008-03-29
, 16:28
|
|
Posts: 4,274 |
Thanked: 5,358 times |
Joined on Sep 2007
@ Looking at y'all and sighing
|
#49
|
It's dmesg not dmegs
|
|
2008-03-29
, 18:09
|
|
Posts: 10 |
Thanked: 0 times |
Joined on Mar 2008
|
#50
|
Sorry i made a misprint Here is a part of summary what i've got
88465.820312] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88738.375000] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88743.390625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88871.664062] DSP Pausing failed, skipping OP change!
[89320.726562] DSP Pausing failed, skipping OP change!
[89545.117187] EAC mode: play enabled, rec enabled
[89547.820312] EAC mode: play disabled, rec disabled
[90335.539062] EAC mode: play enabled, rec enabled
[90338.429687] EAC mode: play disabled, rec disabled
[90399.187500] EAC mode: play enabled, rec enabled
[90401.890625] EAC mode: play disabled, rec disabled
[90403.085937] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90403.117187] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90411.578125] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90411.781250] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90414.250000] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90419.265625] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90430.687500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90436.265625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90449.351562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90454.367187] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90458.421875] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90516.875000] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90524.054687] EAC mode: play enabled, rec enabled
[90526.945312] EAC mode: play disabled, rec disabled
[92030.437500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[92035.921875] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119456.390625] EAC mode: play enabled, rec enabled
[119459.281250] EAC mode: play disabled, rec disabled
[119499.234375] tusb_source_power 629: VBUS a_wait_vrise, devctl 81 otg 184 conf c0010001 prcm 00a80500
[119499.507812] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[119499.593750] hub 1-0:1.0: state 8 ports 1 chg 0000 evt 0000
[119499.593750] usb usb1: usb auto-resume
[119499.593750] usb usb1: finish resume
[119499.593750] hub 1-0:1.0: hub_resume
[119499.617187] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[119499.773437] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[119499.898437] usb 1-1: new high speed USB device using musb_hdrc and address 2
[119500.031250] usb 1-1: default language 0x0409
[119500.031250] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
[119500.031250] usb 1-1: Product: USB Mass Storage Device
[119500.031250] usb 1-1: Manufacturer: TSST corp
[119500.031250] usb 1-1: SerialNumber: SET084MP00000002A01
[119500.031250] usb 1-1: device v0409 p0840 is not supported
[119500.031250] usb 1-1: uevent
[119500.031250] usb 1-1: usb_probe_device
[119500.031250] usb 1-1: configuration #1 chosen from 1 choice
[119500.031250] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[119500.031250] usb 1-1:1.0: uevent
[119500.031250] usb-storage 1-1:1.0: usb_probe_interface
[119500.031250] usb-storage 1-1:1.0: usb_probe_interface - got id
[119500.046875] scsi0 : SCSI emulation for USB Mass Storage devices
[119500.046875] drivers/usb/core/inode.c: creating file '002'
[119500.046875] hub 1-0:1.0: 198mA power budget left
[119500.046875] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119500.046875] hub 1-0:1.0: port 1 enable change, status 00000503
[119500.054687] usb-storage: device found at 2
[119500.054687] usb-storage: waiting for device to settle before scanning
[119500.101562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119505.062500] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SE-T084L TS00 PQ: 0 ANSI: 0
[119505.140625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119505.812500] sr0: scsi3-mmc drive: 6x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[119505.812500] Uniform CD-ROM driver Revision: 3.20
[119505.812500] sr 0:0:0:0: Attached scsi CD-ROM sr0
[119505.812500] sr 0:0:0:0: Attached scsi generic sg0 type 5
[119505.859375] usb-storage: device scan complete
[119506.007812] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119511.070312] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119527.960937] EAC mode: play enabled, rec enabled
[119530.664062] EAC mode: play disabled, rec disabled
[119673.242187] tusb_source_power 629: VBUS b_idle, devctl 98 otg 178 conf c0000003 prcm 00a80500
[119673.390625] tusb_otg_ints 743: Forcing disconnect (no interrupt)
[119674.718750] tusb_source_power 629: VBUS a_wait_vrise, devctl 81 otg 184 conf c0010001 prcm 00a80500
[119674.992187] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[119674.992187] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119674.992187] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[119674.992187] usb 1-1: USB disconnect, address 2
[119674.992187] usb 1-1: unregistering device
[119674.992187] usb 1-1: usb_disable_device nuking all URBs
[119674.992187] usb 1-1: unregistering interface 1-1:1.0
[119674.992187] usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
[119674.992187] usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
[119675.000000] usb 1-1:1.0: uevent
[119675.000000] usbdev1.2_ep00: ep_device_release called for usbdev1.2_ep00
[119675.000000] usb 1-1: uevent
[119675.156250] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[119675.281250] usb 1-1: new high speed USB device using musb_hdrc and address 3
[119675.414062] usb 1-1: default language 0x0409
[119675.414062] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
[119675.414062] usb 1-1: Product: USB Mass Storage Device
[119675.414062] usb 1-1: Manufacturer: TSST corp
[119675.414062] usb 1-1: SerialNumber: SET084MP00000002A01
[119675.414062] usb 1-1: device v0409 p0840 is not supported
[119675.414062] usb 1-1: uevent
[119675.414062] usb 1-1: usb_probe_device
[119675.414062] usb 1-1: configuration #1 chosen from 1 choice
[119675.414062] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[119675.414062] usb 1-1:1.0: uevent
[119675.414062] usb-storage 1-1:1.0: usb_probe_interface
[119675.414062] usb-storage 1-1:1.0: usb_probe_interface - got id
[119675.421875] scsi1 : SCSI emulation for USB Mass Storage devices
[119675.429687] drivers/usb/core/inode.c: creating file '003'
[119675.429687] hub 1-0:1.0: 198mA power budget left
[119675.429687] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119675.429687] hub 1-0:1.0: port 1 enable change, status 00000503
[119675.437500] usb-storage: device found at 3
[119675.437500] usb-storage: waiting for device to settle before scanning
[119680.453125] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SE-T084L TS00 PQ: 0 ANSI: 0
[119681.203125] sr0: scsi3-mmc drive: 6x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[119681.203125] sr 1:0:0:0: Attached scsi CD-ROM sr0
[119681.203125] sr 1:0:0:0: Attached scsi generic sg0 type 5
[119681.226562] usb-storage: device scan complete
[119690.851562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119693.734375] cdrom: sr0: mrw address space DMA selected
[119694.218750] cdrom: sr0: mrw address space DMA selected
[119694.453125] cdrom: sr0: mrw address space DMA selected
[119698.828125] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119744.718750] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119751.500000] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119760.132812] EAC mode: play enabled, rec enabled
[119762.835937] EAC mode: play disabled, rec disabled
[119775.171875] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119780.187500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119794.859375] EAC mode: play enabled, rec enabled
[119797.750000] EAC mode: play disabled, rec disabled
[119976.031250] EAC mode: play enabled, rec enabled
[119978.734375] EAC mode: play disabled, rec disabled
[119988.796875] EAC mode: play enabled, rec enabled
[119991.742187] EAC mode: play disabled, rec disabled
[119994.882812] EAC mode: play enabled, rec enabled
[119997.773437] EAC mode: play disabled, rec disabled
[120003.265625] tusb_source_power 629: VBUS b_idle, devctl 98 otg 178 conf c0000003 prcm 00a80500
[120003.414062] tusb_otg_ints 743: Forcing disconnect (no interrupt)
[120003.890625] hub 1-0:1.0: logical disconnect on port 1
[120003.890625] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[120003.890625] hub 1-0:1.0: port 1, status 0100, change 0000, 12 Mb/s
[120003.890625] usb 1-1: USB disconnect, address 3
[120003.890625] usb 1-1: unregistering device
Here is a part of summary what i've got88465.820312] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88738.375000] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88743.390625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88871.664062] DSP Pausing failed, skipping OP change!
[89320.726562] DSP Pausing failed, skipping OP change!
[89545.117187] EAC mode: play enabled, rec enabled
[89547.820312] EAC mode: play disabled, rec disabled
[90335.539062] EAC mode: play enabled, rec enabled
[90338.429687] EAC mode: play disabled, rec disabled
[90399.187500] EAC mode: play enabled, rec enabled
[90401.890625] EAC mode: play disabled, rec disabled
[90403.085937] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90403.117187] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90411.578125] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90411.781250] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90414.250000] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90419.265625] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90430.687500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90436.265625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90449.351562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90454.367187] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90458.421875] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90516.875000] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90524.054687] EAC mode: play enabled, rec enabled
[90526.945312] EAC mode: play disabled, rec disabled
[92030.437500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[92035.921875] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119456.390625] EAC mode: play enabled, rec enabled
[119459.281250] EAC mode: play disabled, rec disabled
[119499.234375] tusb_source_power 629: VBUS a_wait_vrise, devctl 81 otg 184 conf c0010001 prcm 00a80500
[119499.507812] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[119499.593750] hub 1-0:1.0: state 8 ports 1 chg 0000 evt 0000
[119499.593750] usb usb1: usb auto-resume
[119499.593750] usb usb1: finish resume
[119499.593750] hub 1-0:1.0: hub_resume
[119499.617187] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[119499.773437] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[119499.898437] usb 1-1: new high speed USB device using musb_hdrc and address 2
[119500.031250] usb 1-1: default language 0x0409
[119500.031250] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
[119500.031250] usb 1-1: Product: USB Mass Storage Device
[119500.031250] usb 1-1: Manufacturer: TSST corp
[119500.031250] usb 1-1: SerialNumber: SET084MP00000002A01
[119500.031250] usb 1-1: device v0409 p0840 is not supported
[119500.031250] usb 1-1: uevent
[119500.031250] usb 1-1: usb_probe_device
[119500.031250] usb 1-1: configuration #1 chosen from 1 choice
[119500.031250] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[119500.031250] usb 1-1:1.0: uevent
[119500.031250] usb-storage 1-1:1.0: usb_probe_interface
[119500.031250] usb-storage 1-1:1.0: usb_probe_interface - got id
[119500.046875] scsi0 : SCSI emulation for USB Mass Storage devices
[119500.046875] drivers/usb/core/inode.c: creating file '002'
[119500.046875] hub 1-0:1.0: 198mA power budget left
[119500.046875] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119500.046875] hub 1-0:1.0: port 1 enable change, status 00000503
[119500.054687] usb-storage: device found at 2
[119500.054687] usb-storage: waiting for device to settle before scanning
[119500.101562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119505.062500] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SE-T084L TS00 PQ: 0 ANSI: 0
[119505.140625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119505.812500] sr0: scsi3-mmc drive: 6x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[119505.812500] Uniform CD-ROM driver Revision: 3.20
[119505.812500] sr 0:0:0:0: Attached scsi CD-ROM sr0
[119505.812500] sr 0:0:0:0: Attached scsi generic sg0 type 5
[119505.859375] usb-storage: device scan complete
[119506.007812] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119511.070312] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119527.960937] EAC mode: play enabled, rec enabled
[119530.664062] EAC mode: play disabled, rec disabled
[119673.242187] tusb_source_power 629: VBUS b_idle, devctl 98 otg 178 conf c0000003 prcm 00a80500
[119673.390625] tusb_otg_ints 743: Forcing disconnect (no interrupt)
[119674.718750] tusb_source_power 629: VBUS a_wait_vrise, devctl 81 otg 184 conf c0010001 prcm 00a80500
[119674.992187] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[119674.992187] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119674.992187] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[119674.992187] usb 1-1: USB disconnect, address 2
[119674.992187] usb 1-1: unregistering device
[119674.992187] usb 1-1: usb_disable_device nuking all URBs
[119674.992187] usb 1-1: unregistering interface 1-1:1.0
[119674.992187] usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
[119674.992187] usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
[119675.000000] usb 1-1:1.0: uevent
[119675.000000] usbdev1.2_ep00: ep_device_release called for usbdev1.2_ep00
[119675.000000] usb 1-1: uevent
[119675.156250] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[119675.281250] usb 1-1: new high speed USB device using musb_hdrc and address 3
[119675.414062] usb 1-1: default language 0x0409
[119675.414062] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
[119675.414062] usb 1-1: Product: USB Mass Storage Device
[119675.414062] usb 1-1: Manufacturer: TSST corp
[119675.414062] usb 1-1: SerialNumber: SET084MP00000002A01
[119675.414062] usb 1-1: device v0409 p0840 is not supported
[119675.414062] usb 1-1: uevent
[119675.414062] usb 1-1: usb_probe_device
[119675.414062] usb 1-1: configuration #1 chosen from 1 choice
[119675.414062] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[119675.414062] usb 1-1:1.0: uevent
[119675.414062] usb-storage 1-1:1.0: usb_probe_interface
[119675.414062] usb-storage 1-1:1.0: usb_probe_interface - got id
[119675.421875] scsi1 : SCSI emulation for USB Mass Storage devices
[119675.429687] drivers/usb/core/inode.c: creating file '003'
[119675.429687] hub 1-0:1.0: 198mA power budget left
[119675.429687] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119675.429687] hub 1-0:1.0: port 1 enable change, status 00000503
[119675.437500] usb-storage: device found at 3
[119675.437500] usb-storage: waiting for device to settle before scanning
[119680.453125] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SE-T084L TS00 PQ: 0 ANSI: 0
[119681.203125] sr0: scsi3-mmc drive: 6x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[119681.203125] sr 1:0:0:0: Attached scsi CD-ROM sr0
[119681.203125] sr 1:0:0:0: Attached scsi generic sg0 type 5
[119681.226562] usb-storage: device scan complete
[119690.851562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119693.734375] cdrom: sr0: mrw address space DMA selected
[119694.218750] cdrom: sr0: mrw address space DMA selected
[119694.453125] cdrom: sr0: mrw address space DMA selected
[119698.828125] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119744.718750] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119751.500000] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119760.132812] EAC mode: play enabled, rec enabled
[119762.835937] EAC mode: play disabled, rec disabled
[119775.171875] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119780.187500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119794.859375] EAC mode: play enabled, rec enabled
[119797.750000] EAC mode: play disabled, rec disabled
[119976.031250] EAC mode: play enabled, rec enabled
[119978.734375] EAC mode: play disabled, rec disabled
[119988.796875] EAC mode: play enabled, rec enabled
[119991.742187] EAC mode: play disabled, rec disabled
[119994.882812] EAC mode: play enabled, rec enabled
[119997.773437] EAC mode: play disabled, rec disabled
[120003.265625] tusb_source_power 629: VBUS b_idle, devctl 98 otg 178 conf c0000003 prcm 00a80500
[120003.414062] tusb_otg_ints 743: Forcing disconnect (no interrupt)
[120003.890625] hub 1-0:1.0: logical disconnect on port 1
[120003.890625] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[120003.890625] hub 1-0:1.0: port 1, status 0100, change 0000, 12 Mb/s
[120003.890625] usb 1-1: USB disconnect, address 3
[120003.890625] usb 1-1: unregistering device