Active Topics
-
Maemo repository (8)
to Community by Maemish - 1 day, 18 hrs ago -
Porting apps to Leste (44)
to Maemo 7 / Leste by norayr - 1 day, 23 hrs ago -
List of well performing apps on Leste (35)
to Maemo 7 / Leste by smatkovi - 4 days, 20 hrs ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (13)
to SailfishOS by edp17 - 5 days, 18 hrs ago -
Sailfish OS for the Samsung Galaxy Note 4 (SM-N910C) - (treltexx) (79)
to SailfishOS by edp17 - 5 days, 18 hrs ago -
U-Boot for Nokia RX-51 with BootMenu (updated version 2012.10-rc3-1) (843)
to Alternatives by Arno_11 - 5 days, 23 hrs ago - more...
| The Following User Says Thank You to McLightning For This Useful Post: | ||
|
2009-07-30
, 10:55
|
|
Posts: 384 |
Thanked: 90 times |
Joined on Mar 2008
|
#12
|
Did you install / use USBControl ?
| The Following User Says Thank You to st5150 For This Useful Post: | ||
|
|
2009-07-30
, 11:03
|
|
Posts: 308 |
Thanked: 62 times |
Joined on Jun 2009
@ Turkiye
|
#13
|
yea i tried with both USBcontrol and the usbhost status bar applet which was written by KateAlhola
both didn't work
but i tried with usb 256mb floppy drive , 500 gb hard drive
they did worked.
both didn't work
but i tried with usb 256mb floppy drive , 500 gb hard drive
they did worked.
|
|
2009-07-30
, 11:05
|
|
Posts: 308 |
Thanked: 62 times |
Joined on Jun 2009
@ Turkiye
|
#14
|
it is automatically suspending something about usb as you may see in dmesg respond
[14219.914062] usb 1-1: usb auto-suspend
[14221.937500] hub 1-0:1.0: hub_suspend
[14221.937500] usb usb1: usb auto-suspend
|
|
2009-07-31
, 11:45
|
|
Posts: 308 |
Thanked: 62 times |
Joined on Jun 2009
@ Turkiye
|
#15
|
nobody wrote something since yesterday 
pfff i hope this wont become another disappointment
pfff i hope this wont become another disappointment
|
|
2009-07-31
, 19:29
|
|
Posts: 384 |
Thanked: 90 times |
Joined on Mar 2008
|
#16
|
Well this is what happens when I connected my USB to serial adapter and used the USBControl app to put my NIT into host mode:
Off topic, but anyone know what all these EAC mode: play enabled, rec enabled message filling my dmesg mean?
EDIT: this link could have some info for you http://www.mail-archive.com/maemo-de.../msg10176.html
Last edited by st5150; 2009-07-31 at 23:57.
Code:
[47236.562500] usb usb1: usb auto-resume [47236.562500] usb usb1: finish resume [47236.562500] hub 1-0:1.0: hub_resume [47236.585937] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [47236.906250] EAC mode: play enabled, rec enabled [47238.585937] hub 1-0:1.0: hub_suspend [47238.585937] usb usb1: usb auto-suspend [47239.531250] EAC mode: play disabled, rec disabled [47240.953125] EAC mode: play enabled, rec enabled [47241.703125] usb usb1: usb auto-resume [47241.703125] usb usb1: finish resume [47241.703125] hub 1-0:1.0: hub_resume [47241.726562] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [47243.382812] EAC mode: play disabled, rec disabled [47243.726562] hub 1-0:1.0: hub_suspend [47243.726562] usb usb1: usb auto-suspend [47259.250000] EAC mode: play enabled, rec enabled [47260.125000] usb usb1: usb auto-resume [47260.125000] usb usb1: finish resume [47260.125000] hub 1-0:1.0: hub_resume [47260.148437] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [47261.679687] EAC mode: play disabled, rec disabled [47262.148437] hub 1-0:1.0: hub_suspend [47262.148437] usb usb1: usb auto-suspend [47278.390625] DSP Pausing failed, skipping OP change! [47280.609375] EAC mode: play enabled, rec enabled [47281.210937] tusb_source_power 633: VBUS a_wait_vrise, devctl 81 otg 184 conf c0010001 prcm 00a80500 [47281.367187] musb_stage0_irq 645: CONNECT (a_host) devctl 5d [47281.367187] hub 1-0:1.0: state 8 ports 1 chg 0000 evt 0000 [47281.367187] usb usb1: usb auto-resume [47281.367187] usb usb1: finish resume [47281.367187] hub 1-0:1.0: hub_resume [47281.390625] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [47281.546875] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [47281.671875] usb 1-1: new full speed USB device using musb_hdrc and address 2 [47281.804687] usb 1-1: default language 0x0409 [47281.804687] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 [47281.804687] usb 1-1: Product: USB-Serial Controller D [47281.804687] usb 1-1: Manufacturer: Prolific Technology Inc. [47281.804687] usb 1-1: device v067b p2303 is not supported [47281.804687] usb 1-1: uevent [47281.804687] usb 1-1: usb_probe_device [47281.804687] usb 1-1: configuration #1 chosen from 1 choice [47281.804687] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [47281.804687] usb 1-1:1.0: uevent [47281.804687] usbtest 1-1:1.0: usb_probe_interface [47281.804687] usbtest 1-1:1.0: usb_probe_interface - got id [47281.804687] usbserial_generic 1-1:1.0: usb_probe_interface [47281.804687] usbserial_generic 1-1:1.0: usb_probe_interface - got id [47281.804687] pl2303 1-1:1.0: usb_probe_interface [47281.804687] pl2303 1-1:1.0: usb_probe_interface - got id [47281.804687] pl2303 1-1:1.0: pl2303 converter detected [47281.804687] usb 1-1: pl2303 converter now attached to ttyUSB0 [47281.804687] /home/bifh4/diablo-uarm-prereleased.gcc34qemu/work/kernel-diablo-2.6.21/kernel-source-diablo/drivers/usb/core/inode.c: creating file '002' [47281.804687] hub 1-0:1.0: 100mA power budget left [47281.804687] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [47281.804687] hub 1-0:1.0: port 1 enable change, status 00000103 [47284.781250] EAC mode: play disabled, rec disabled [47285.195312] EAC mode: play enabled, rec enabled [47287.625000] EAC mode: play disabled, rec disabled [47297.234375] EAC mode: play enabled, rec enabled [47300.765625] EAC mode: play disabled, rec disabled [47312.421875] EAC mode: play enabled, rec enabled [47315.437500] EAC mode: play disabled, rec disabled
Off topic, but anyone know what all these EAC mode: play enabled, rec enabled message filling my dmesg mean?
EDIT: this link could have some info for you http://www.mail-archive.com/maemo-de.../msg10176.html
Last edited by st5150; 2009-07-31 at 23:57.
| The Following 2 Users Say Thank You to st5150 For This Useful Post: | ||
|
|
2009-08-01
, 09:48
|
|
Posts: 308 |
Thanked: 62 times |
Joined on Jun 2009
@ Turkiye
|
#17
|
is there any other kernel-patch to apply to n810 to get this work
here are the steps i did:
i reflashed my device
i installed usbcontrol app.
then connect arduino to serial to usb converter and converter to n810.
then insmod /media/mmc/usb_serial.ko
and insmod /media/mmc/ftdi_sio.ko
and insmod /media/mmc/pl2303.ko
infact now all these three steps above are done by:
http://www.electronicproductonline.c..._0.1_armel.deb
by the way i also installed screen and gpspipe modules
and serial module for python
then i turn usb mode into host mode by usbcontroller
afterwards i become root in terminal then
i run this command:
screen /dev/ttyUSB0 -FTCYPKJ5 9600,cs8,-ixon,-ixon,-istrip
it says
Cannot exec "/dev/ttyUSB0" : No Such File or Directory
i also check out the /dev/ folder with emelfm2
there are lots of files named tt1 tty2 tty3 ..... and ttyS0
but there is no ttyUSB0 file
sorry for my english
here are the steps i did:
i reflashed my device
i installed usbcontrol app.
then connect arduino to serial to usb converter and converter to n810.
then insmod /media/mmc/usb_serial.ko
and insmod /media/mmc/ftdi_sio.ko
and insmod /media/mmc/pl2303.ko
infact now all these three steps above are done by:
http://www.electronicproductonline.c..._0.1_armel.deb
by the way i also installed screen and gpspipe modules
and serial module for python
then i turn usb mode into host mode by usbcontroller
afterwards i become root in terminal then
i run this command:
screen /dev/ttyUSB0 -FTCYPKJ5 9600,cs8,-ixon,-ixon,-istrip
it says
Cannot exec "/dev/ttyUSB0" : No Such File or Directory
i also check out the /dev/ folder with emelfm2
there are lots of files named tt1 tty2 tty3 ..... and ttyS0
but there is no ttyUSB0 file
sorry for my english
|
|
2009-08-01
, 10:04
|
|
Posts: 308 |
Thanked: 62 times |
Joined on Jun 2009
@ Turkiye
|
#18
|
by the way in host mode it says
unsupported usb device
and
unable to connect , no file system available
and here is the end of dmesg respond i get when i turn off host mode:
[ 950.617187] tusb_source_power 633: VBUS b_idle, devctl 98 otg 179 conf c0000003 prcm 00a80300
[ 950.945312] tusb_otg_ints 747: Forcing disconnect (no interrupt)
Last edited by McLightning; 2009-08-01 at 10:20.
unsupported usb device
and
unable to connect , no file system available
and here is the end of dmesg respond i get when i turn off host mode:
[ 950.617187] tusb_source_power 633: VBUS b_idle, devctl 98 otg 179 conf c0000003 prcm 00a80300
[ 950.945312] tusb_otg_ints 747: Forcing disconnect (no interrupt)
Last edited by McLightning; 2009-08-01 at 10:20.
|
|
2009-08-01
, 10:50
|
|
Posts: 384 |
Thanked: 90 times |
Joined on Mar 2008
|
#19
|
Yes, the behavior/messages when you put your USB to serial adapter in hostmode is correct. Are you sure your USB to serial adapter has the proper/supported chipset ? Looks like yours has a Silicon Labs CP2101 chipset.
You need to see something like this:
[47281.804687] usbtest 1-1:1.0: usb_probe_interface
[47281.804687] usbtest 1-1:1.0: usb_probe_interface - got id
[47281.804687] usbserial_generic 1-1:1.0: usb_probe_interface
[47281.804687] usbserial_generic 1-1:1.0: usb_probe_interface - got id
[47281.804687] pl2303 1-1:1.0: usb_probe_interface
[47281.804687] pl2303 1-1:1.0: usb_probe_interface - got id
[47281.804687] pl2303 1-1:1.0: pl2303 converter detected
[47281.804687] usb 1-1: pl2303 converter now attached to ttyUSB0
Also, I'm using the USB cable came the nokia with one of these adapters
http://www.dealextreme.com/details.d...646~r.45363994 and it seems this USB to serial adapter has a supported chipset http://www.dealextreme.com/details.dx/sku.5859
Last edited by st5150; 2009-08-01 at 10:56.
You need to see something like this:
[47281.804687] usbtest 1-1:1.0: usb_probe_interface
[47281.804687] usbtest 1-1:1.0: usb_probe_interface - got id
[47281.804687] usbserial_generic 1-1:1.0: usb_probe_interface
[47281.804687] usbserial_generic 1-1:1.0: usb_probe_interface - got id
[47281.804687] pl2303 1-1:1.0: usb_probe_interface
[47281.804687] pl2303 1-1:1.0: usb_probe_interface - got id
[47281.804687] pl2303 1-1:1.0: pl2303 converter detected
[47281.804687] usb 1-1: pl2303 converter now attached to ttyUSB0
Also, I'm using the USB cable came the nokia with one of these adapters
http://www.dealextreme.com/details.d...646~r.45363994 and it seems this USB to serial adapter has a supported chipset http://www.dealextreme.com/details.dx/sku.5859
Last edited by st5150; 2009-08-01 at 10:56.
| The Following User Says Thank You to st5150 For This Useful Post: | ||
|
|
2009-08-01
, 11:00
|
|
Posts: 308 |
Thanked: 62 times |
Joined on Jun 2009
@ Turkiye
|
#20
|
yea i saw some of those lines
such as usb_probe_interface
but i've never seen a line such as "attached to ttyUSB0"
and here is the photo of mine:
http://www.flickr.com/photos/mclightning/3767980577/
such as usb_probe_interface
but i've never seen a line such as "attached to ttyUSB0"
and here is the photo of mine:
http://www.flickr.com/photos/mclightning/3767980577/
here is my dmesg: