Page 333 of 536 « First 323331332 333 334335343 Last »
Poll: Do you think its possible to overclock the N900?!
Poll Options
Do you think its possible to overclock the N900?!

Reply
Thread Tools
nokian-series is offline nokian-series
2010-04-25 , 20:56
Posts: 169 | Thanked: 41 times | Joined on Apr 2010 @ Portugal
#3321
Originally Posted by christexaport View Post
I copied your Queen Beecon file to my system, but it makes the widget crash, and other widgets disappear. Can't figure out why. Any clues or other alternative instructions? I want a similar setup, but have no clue as to Linux commands.
Yes, i've noticed that some of you can do it, others cant do it.
After all, i thing that instructions are quite strange, because they doesent work to everyone.

Aftert that i've re-flashed my device, and i've some problems due to root commands.

I've my new UI allmost complete, then, i'll use the export\import method on of QBW and share it again.

Cheers
 
esthreel's Avatar
esthreel is offline esthreel
2010-04-25 , 21:09
Posts: 259 | Thanked: 55 times | Joined on Apr 2010 @ Vilnius, Lithuania
#3322
Originally Posted by Rapparee View Post
will overclocking improve flash performance.
Yes it will - A LOT.
 
titan is offline titan
2010-04-25 , 21:17
Posts: 946 | Thanked: 1,650 times | Joined on Oct 2009 @ Germany
#3323
You are absolutely correct. You simply install the kernel "kernel-power-flasher"
or better the whole package "kernel-power-settings" and then you select or customize
your configuration. According to you the uname output you're already running the kernel.
What "range of kernels" do you mean?

Originally Posted by Jinux View Post
So I just started delving into this and the first thing that's confusing me is the range of kernels. I thought you just install the one kernel and then change config files depending on whether you want lv, ulv, xlv etc??
uname -r reports I have 2.6.28.10power-omap1
 

The Following User Says Thank You to titan For This Useful Post:
titan is offline titan
2010-04-25 , 22:00
Posts: 946 | Thanked: 1,650 times | Joined on Oct 2009 @ Germany
#3324
ShadowJK has implemented a script to monitor the battery:
http://mg.pov.lt/maemo-irclog/%23mae...04-22T12:16:21
 

The Following User Says Thank You to titan For This Useful Post:
AlMehdi is offline AlMehdi
2010-04-25 , 22:53
Posts: 1,751 | Thanked: 844 times | Joined on Feb 2010 @ Sweden
#3325
Originally Posted by titan View Post
ShadowJK has implemented a script to monitor the battery:
http://mg.pov.lt/maemo-irclog/%23mae...04-22T12:16:21
Tried it but did not understand all the output. It looks useful though. Is there somewhere i could find documentation on the meaning of this?

Those who have enabled the bq27x00_battery module must unenable it first before trying. To do that you just run "modprobe -r bq27x00_battery" and then you try.
 

The Following User Says Thank You to AlMehdi For This Useful Post:
Jinux is offline Jinux
2010-04-25 , 23:00
Posts: 47 | Thanked: 22 times | Joined on Apr 2010
#3326
Originally Posted by titan View Post
You are absolutely correct. You simply install the kernel "kernel-power-flasher"
or better the whole package "kernel-power-settings" and then you select or customize
your configuration. According to you the uname output you're already running the kernel.
What "range of kernels" do you mean?
Yeah I managed to follow the instructions I'm just finding it hard following this thread. By range of kernels I mean one person will have "the 125-800" kernel and another will be using "the 250-900" kernel etc. It's just confusing.
 
Elanzer is offline Elanzer
2010-04-25 , 23:14
Posts: 16 | Thanked: 8 times | Joined on Apr 2010
#3327
I've managed to manually tune and achieve these settings stable - voltages far below Titan's "ideal" kernel settings. I tested each step as the maximum frequency under stress and then bursts of stress for about 5-10min to make sure it had no stability issues. Lots of phone crashes/reboots later, I found out the lowest voltage possible with stability for each stepping. I used the same process on my laptop, and I managed to overclock it while undervolting it just the same - rock solid for 3 years, the process extended it's practical lifetime both performance wise and battery wise.

So far with 125mhz/1150mhz as the min/max frequency, the phone has an uptime of about 21 hours, and I've put about 5 hours of that under heavy use for testing purposes.

I can't say that these will work for anybody else, but they certainly work great on mine. After 1ghz on my chip, you can see how the voltage requirement just goes up the wall for each increase in comparison to 1ghz and below, 1ghz is the sweet spot for performance and battery life on mine.

Code:
VALUE  VOLTAGE   FREQUENCY
12     0.7500 V    125 MHz
20     0.8500 V    250 MHz
26     0.9250 V    500 MHz
29     0.9625 V    550 MHz
31     0.9875 V    600 MHz
35     1.0375 V    700 MHz
38     1.0750 V    750 MHz
41     1.1125 V    805 MHz
43     1.1375 V    850 MHz
46     1.1750 V    900 MHz
50     1.2225 V    950 MHz
53     1.2625 V    1000 MHz
58     1.3250 V    1100 MHz
62     1.3750 V    1150 MHz
The default nokia firmware uses 1.3500v for 600mhz, but I only needed 1.2625v for 1000mhz.

I can't guarantee these will work for anybody else nor do I even recommend using them at all without doing sitting down and doing all the testing yourself, it seems I've had a much easier time overclocking my N900 on here than the majority of people. I've probably gotten lucky on the quality of my CPU.
Last edited by Elanzer; 2010-04-25 at 23:19.
 

The Following 3 Users Say Thank You to Elanzer For This Useful Post:
christexaport's Avatar
christexaport is offline christexaport
2010-04-26 , 02:57
Posts: 1,589 | Thanked: 720 times | Joined on Aug 2009 @ Arlington (DFW), Texas
#3328
Originally Posted by nokian-series View Post
Yes, i've noticed that some of you can do it, others cant do it.
After all, i thing that instructions are quite strange, because they doesent work to everyone.

Aftert that i've re-flashed my device, and i've some problems due to root commands.

I've my new UI allmost complete, then, i'll use the export\import method on of QBW and share it again.

Cheers
Cool. Looking forward to it. I love that setup. I only wish it had a more graphical look to it. Maybe a tachometer for the CPU load percentage, a spedometer for clock speed, along with a RAM monitor.

Hopefully, all this work can be combined into a nice app/widget.
__________________
Maemo-Freak.com
"...and the Freaks shall inherit the Earth."
 
gabby131 is offline gabby131
2010-04-26 , 02:59
Posts: 1,729 | Thanked: 388 times | Joined on Jan 2010 @ Canada
#3329
Originally Posted by geneven View Post
It improves everything. It's the msg of tablets.
yo! so on what max and min have you OC'd yours???

are you trying the 1.15ghz???

 
geneven is offline geneven
2010-04-26 , 03:39
Posts: 5,795 | Thanked: 3,151 times | Joined on Feb 2007 @ Agoura Hills Calif
#3330
Originally Posted by gabby131 View Post
yo! so on what max and min have you OC'd yours???

are you trying the 1.15ghz???

No. There are two concerns with overclocking, it seems. Instability is one. I am very stable at 800 Mhz and I'm sure I could go higher. But the other concern is long-term wear and tear. I am very happy with how my N900 is working now and I want to stay that way.

So I am trying to hold back from going faster for as long as possible.
 

The Following User Says Thank You to geneven For This Useful Post:
Reply
Page 333 of 536 « First 323331332 333 334335343 Last »

Tags
cooking on gas, cortex-a8, faster, first to fry it wins!, hardware, its smoking, n900, need for speed, need for weed, nos, omap, omap3, omap3430, overclock, overclocking, soc, system-on-a-chip, the dogs, this thread got good!, vtec just kicked in y0!, warranty will be void, whooplah, zoom zoom

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 10:54.

Contact Us - Home - Archive - Top