Notices
Page 8 of 9 « First 67 8 9
Reply
Thread Tools
pH5's Avatar
pH5 is offline pH5
2010-06-01 , 17:36
Posts: 138 | Thanked: 375 times | Joined on Aug 2009 @ Berlin
#71
Thanks for the feedback.

Originally Posted by mankir View Post
"Set PWN" with Level=0 is not necessary for normal patterns working, but testing of other patterns in the app is not possible.
Do you mean that if you remove the "Set PWM = 0" command from a pattern, testing doesn't work anymore? I can't reproduce that.

Originally Posted by mankir View Post
When i charge, testing of another pattern is less possible (interrupted earlyer?).
In the wiki there are some random mce issues mentioned, i guess it's because one of the implementations differs in the use of low-level commands, because testing is only interrupted when switching to second engine while first engine still lights (used for fading).
Maybe adding some kind of always-on "PatternInhibit" with highest priority could keep mce busy, sidestepping all those race condition issues with the "Test" button.
 
mankir's Avatar
mankir is offline mankir
2010-06-01 , 17:55
Posts: 276 | Thanked: 224 times | Joined on Dec 2009 @ Frankfurt, Germany
#72
I noticed this, when i accidentally forgot the "Set PWN" with Level=0 at the beginning of engine2 (which waits for a trigger from engine1). I wasn't able to test the pattern in the app, but the pattern was working anyway.

Similar issue, when i forgot the "Return to start" at the end of engine2: The pattern was working, but the app returned an error code.

Interrupts of testing were noticed, when engine1 is still on and engine2 comes in. when plugged to usb, testing is interrupted immediatelly.

Just noticed that sometimes testing is only possible, when edited before and clicked on done already (may because of manual edit).
__________________
MOD-Package: http://talk.maemo.org/showthread.php?t=42415
 

The Following User Says Thank You to mankir For This Useful Post:
Raubtier is offline Raubtier
2010-06-03 , 13:01
Posts: 261 | Thanked: 73 times | Joined on Sep 2009
#73
if one receives a sms and a missed call the phone only displays the set colour of one of the notification lights, could led pattern (in the next update) be improved to enable the option that the set lights of both the sms and the missed call are displayed/blinked?
 

The Following 2 Users Say Thank You to Raubtier For This Useful Post:
Zekahz is offline Zekahz
2010-06-08 , 15:05
Posts: 185 | Thanked: 49 times | Joined on Apr 2010 @ The Netherlands
#74
I would acctualy like to combine the colors white and blue but this is impossible since white uses all the colors right?
 
Spotfist is offline Spotfist
2010-06-08 , 15:15
Posts: 478 | Thanked: 101 times | Joined on Feb 2010
#75
the message that is desplayed before saving "if you get this wrong your phone is dead" how series can this be? I don't wana brick my phone, if I can "test" the pattern and it shows working then am I ok?

I had a look on the wiki but there wasn't much info about it... Any tips on what not to do would be greatfull
 
pH5's Avatar
pH5 is offline pH5
2010-06-08 , 18:32
Posts: 138 | Thanked: 375 times | Joined on Aug 2009 @ Berlin
#76
Originally Posted by Zekahz View Post
I would acctualy like to combine the colors white and blue but this is impossible since white uses all the colors right?
You can set one channel to blue and one to yellow (red+green). Light up blue+yellow at the same time to get white. Try pasting the following pattern for a start:
Code:
PatternExample=254;0;0;RGb;9d8002ff03ff6000e004047f057f6000e0040000;9d804000e080047f057fe0800000
Originally Posted by Spotfist View Post
the message that is desplayed before saving "if you get this wrong your phone is dead" how series can this be? I don't wana brick my phone, if I can "test" the pattern and it shows working then am I ok?

I had a look on the wiki but there wasn't much info about it... Any tips on what not to do would be greatfull
In theory, the worst case scenario would be a bug in the LED pattern editor where it writes a broken mce.ini that causes a mce startup failure (and thus possibly reboot loop).
In practice, I've been careful to abort early enough if there are inconsistencies. By now, the program has been tested by quite a few people, and so far nobody has been able to make it fail (and lived to tell about it). I should just remove that warning instead of needlessly scaring people.
 
Spotfist is offline Spotfist
2010-06-09 , 08:38
Posts: 478 | Thanked: 101 times | Joined on Feb 2010
#77
The first time the message did scare me, I found that on some occasions when using the test button that the led would not do exactly what was on the screen so when I then went to save I was orried I had done something wrong, for the moment I have just changed the colours, as some kinds of message are more important than others (im is red as they need a faster reply)
Last edited by Spotfist; 2010-06-09 at 14:02.
 
infected69 is offline infected69
2010-07-01 , 10:01
Posts: 122 | Thanked: 19 times | Joined on Jan 2010 @ Denmark
#78
i have changed the color of "PowerOn" but the color is still white when im turning on the device......

im i doing something worng?
 
infected69 is offline infected69
2010-07-06 , 07:43
Posts: 122 | Thanked: 19 times | Joined on Jan 2010 @ Denmark
#79
Originally Posted by infected69 View Post
i have changed the color of "poweron" but the color is still white when im turning on the device......

Im i doing something worng?
****bump****
 
pH5's Avatar
pH5 is offline pH5
2010-07-06 , 20:19
Posts: 138 | Thanked: 375 times | Joined on Aug 2009 @ Berlin
#80
Originally Posted by infected69 View Post
i have changed the color of "PowerOn" but the color is still white when im turning on the device......

im i doing something worng?
http://talk.maemo.org/showthread.php...425#post650425

I don't think it is possible to change it.
 

The Following User Says Thank You to pH5 For This Useful Post:
Reply
Page 8 of 9 « First 67 8 9

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 06:49.

Contact Us - Home - Archive - Top