Page 2 of 2 1 2
Reply
Thread Tools
Jayboy5's Avatar
Jayboy5 is offline Jayboy5
2010-06-16 , 08:48
Posts: 105 | Thanked: 56 times | Joined on Apr 2010 @ Florida
#11
Originally Posted by breakd0wn View Post
As far as the screws, it was actually tekseven that broke 2 screws off in his n900. Also someone here sent their n900 off for repair and it came back with broken screws.

And the videos, I don't. Another guy on youtube took it apart to reach the video light and video taped it.

The n900 service manual is in the wiki.

What's the reason you need to replace your screen? If it's broken you are better off sending it to nokia I think. Unless you scratched it and just want a new, your only choice is to do it yourself or live with it.
Thanks alot...
Yeah believe it or not my n900 slid off my bed and landed screen down on the corner of a metel dumb bell weight. Thankfully all that happened was a very small fingernail indent on one spot on the screen ( like the same size of a mark your pinky finger would make if you pinched your skin) I actually am very very lucky considering the 15 pound metal bar it landed on. The indent in the screen only becomes a problem when I am drawing or trying to scroll in that area. There are no pixel problems whatsoever, so I am pretty sure that there is nothing wrong with the LCD just the touch screen.
__________________
Jayboy5
 
nicorumiz's Avatar
nicorumiz is offline nicorumiz
2010-06-19 , 21:33
Posts: 96 | Thanked: 16 times | Joined on Jan 2010 @ Denver, CO -> Italy
#12
Any Idea where I can find a qwerty keyboard? (only the keys for the N900)

Thanks
 
breakd0wn's Avatar
breakd0wn is offline breakd0wn
2010-06-22 , 10:39
Posts: 96 | Thanked: 35 times | Joined on May 2010
#13
thenokiaparts.com

Only place that I know of, aside from maybe ebay. But they are out of stock, and also closed until july 8th. Hopefully when they open again they will replenish their n900 part stock. I need to grab something myself.
 
inidrog's Avatar
inidrog is offline inidrog
2010-07-04 , 16:44
Posts: 266 | Thanked: 89 times | Joined on Jan 2010 @ Norway
#14
Hi I was about to replace the digitizer/touch thing. I odered the part from mytrendyphone.no and after waiting for it for a very long time, I was eager to replace it so I dissasembled the N900 but first then I noticed what I did get from mytrendyphone was utterly crap and a very bad and cheap copy and no metal frame or speker as described. There was allso dust/particles and finger prints inside the digitizer "sandwich". I returned it and I am waiting for a reply. So I am back to scratch with old parts. No problem operation. If you are technically capable. The screws feel very easy to break so be careful. Anyone knows where to get hold of N900 scfrews kit, I would feel much safer operating the phone again if I had a new screws kit, but have not been able to get hold of any.
__________________
---

"Sex is not the answer. Sex is the question. Yes is the answer..."
 
inidrog's Avatar
inidrog is offline inidrog
2010-07-09 , 20:21
Posts: 266 | Thanked: 89 times | Joined on Jan 2010 @ Norway
#15
Okay, now I am done and happy again. mytrendyphone.no replaced the "cheap china copy" with an original Nokia touch screen with metal frame and ear piece. I swapped it without any problems with screws (again). Perfect. This time I did the operation 10 times faster.
__________________
---

"Sex is not the answer. Sex is the question. Yes is the answer..."
 
inidrog's Avatar
inidrog is offline inidrog
2010-07-09 , 21:17
Posts: 266 | Thanked: 89 times | Joined on Jan 2010 @ Norway
#16
To complete this operation I followed these steps in the:
Nokia RX-51 Service Manual Level 1&2

Page 12, step 4,5,6,7,8

Page 16, step 25,26,27,28,29,30

Page 17, step 40,41,42,43,44,45,46,47

Just reverse the steps to get it back together.
__________________
---

"Sex is not the answer. Sex is the question. Yes is the answer..."
 

The Following 2 Users Say Thank You to inidrog For This Useful Post:
pjs is offline pjs
2010-07-13 , 19:44
Posts: 28 | Thanked: 28 times | Joined on May 2010
#17
for future reference, the service manual links are located on the wiki here:
http://wiki.maemo.org/N900_Hardware_Hacking#Resources
 

The Following User Says Thank You to pjs For This Useful Post:
sup is offline sup
2012-11-30 , 12:09
Posts: 197 | Thanked: 91 times | Joined on Dec 2010
#18
Originally Posted by inidrog View Post
To complete this operation I followed these steps in the:
Nokia RX-51 Service Manual Level 1&2

Page 12, step 4,5,6,7,8

Page 16, step 25,26,27,28,29,30

Page 17, step 40,41,42,43,44,45,46,47

Just reverse the steps to get it back together.
If anyone still reads this, have you used the same screws or did you order them new? And what about the earpiece adhesive? What did you use instead?
 
Kossuth is offline Kossuth
2012-11-30 , 12:44
Posts: 159 | Thanked: 217 times | Joined on Oct 2011
#19
It is recommended to use always new screws (the screw kit is cheap), but I reused the old ones, because they came out really easily and without any damage to heads or threads. If I remember correctly, when I replaced my Digitizer the part came with the earpiece, so I didnt have to use any extra adhesive. I used this part:
http://www.klc.fi/fin/tuotteet/Nokia...W-ASSY-2691V9-
 

The Following User Says Thank You to Kossuth For This Useful Post:
sup is offline sup
2012-11-30 , 12:50
Posts: 197 | Thanked: 91 times | Joined on Dec 2010
#20
Originally Posted by Kossuth View Post
It is recommended to use always new screws (the screw kit is cheap), but I reused the old ones, because they came out really easily and without any damage to heads or threads. If I remember correctly, when I replaced my Digitizer the part came with the earpiece, so I didnt have to use any extra adhesive. I used this part:
http://www.klc.fi/fin/tuotteet/Nokia...W-ASSY-2691V9-
Thanks for the info, but where can I get the screws? I tried googling "phillips screws size 00" but I get only offers to buy a screwdriver. Ir can I walk into a store to buy them?

I found http://aukro.cz/digitizer-lcd-dotyko...805604712.html for around 11€, but I guess it comes from China and I have read mixed reactions to Chinese products here. On the other hand, the price for your part is two much for me. The problem with my screen (besides lots of scratches) is that just under left upper corner, it gets a bit unresponsive, but it is not such a huge deal to spend 50€ on it. I might just try to order it and the worst that can happen is that it wont work.
 

The Following User Says Thank You to sup For This Useful Post:
Reply
Page 2 of 2 1 2

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 14:11.

Contact Us - Home - Archive - Top