http://www.flickr.com/photos/mclight...7624308643969/
check this out fellows here is what i made in last two days

But there is still problem to be honest
as it turns out voltage out of n810 is lower than the desktop computer.
so it didnt run the motors.
today im working on it to get it powered up with an external battery

no responds??!?!?!
come on fellows

Very cool! More details would be welcome.

I've been working on a somewhat similar project - using an N900 to generate PPM signals to control an R/C airplane using the accelerometer.

yes im gonna write more information and details here
when the voltage problem solved im gonna a record a video
you can follow ongoing process here
http://www.arduino.cc/cgi-bin/yabb2/...num=1278269335

by the way thanks for the response

http://www.metacafe.com/watch/486322...no_and_rc_car/
here is a demo video

first i turn on and off leds
then i run the motor
it runs
after i send the command to run the motor reverse
arduino and n810 communication ends
that's the issue we are trying to solve

N810 would only be able to suuply 100-200mA or so, your motors would most likely draw many times this, and even more if you throw it from forward into reverse..

hi fellows project is done
visit
www.mclightning.com/narduino
for codes information etc.

Hey this is pretty cool. You should stream image from that front camera when you control it. :P

You sir, you are a true geek. I salute you
Great job.