Notices


Reply
Thread Tools
Posts: 547 | Thanked: 1,383 times | Joined on Sep 2009 @ Stockholm, Sweden
#501
Originally Posted by shaggy k View Post
app is great and was working fine until it updated the other day, to version 1.1.9 now i cant send a mms it trys to send one but, it comes up with

operation failed
MMSC: 200_OK
BODY : J

all settings are correct it just since it updated itself it wont send
Between 1.1.8 and 1.1.9 the only change was some translation fixes so something else has most likely changed - what does the log say?

Originally Posted by m0par View Post
I can send pics just fine. It also seems to retrieve them fine, or at least stays connected long enough for me to assume that it is downloading the pic but then fails to decode it properly, Then fMMS claims "Content type not supported. Part media1.jpeg is removed" and only displays any text that was sent with the message.

I'm using fMMS 1.1.9 on Viaero in USA.

log attached (I had to remove the leading portion to fit under the forum's size limit. If you think the part I removed may contain any relevant info, I will email it to you in its entirety.)

Thanks!
Seems your carrier is doing this - fMMS is not at least, sorry

Originally Posted by granden View Post
I have tried it now for some time and still can't get it to work. I have the latest update as of yesterday. Have not checked today.

When trying to download a MMS, I use polite mode, it asks to change connection and it changes to Telenor MMS and then it just says Downloading MMS waiting like 5-10minutes and still nothing. I have tried longer as well. But nothing.

So I have to kill the application. Is there any common misstake that I might have made?
Double and triple check that the settings are correct

Originally Posted by jdb2 View Post
Reposting this here as per several users' advice.

-----------------------------------------------------------------

Last night a friend sent me an MMS message. fMMS promptly started up and displayed "Downloading." It seemed to have hung after several minutes had passed but finally failed with a "Unable to retrieve message" error.

I've tried downloading the message several times using the latest version of fMMS but I get the same behavior described above.

Attached is fMMS's log file -- If anyone can make sense of it I would greatly appreciate your thoughts on what the problem might be.


Thanks,

jdb2
Settings seems wrong, please double and triple check that all settings are correct

Originally Posted by milkbottles View Post
Love this app however when anyone sends me a picture message I recieve it many times, 3-5 times each message over a few days.

Any ideas how to fix this?

I am on T-mobile UK

Thanks,
Check the settings so they are correct, otherwise fMMS can't send the notification to the server that it received the message correctly.

Originally Posted by techdork View Post
Here's a question .. how do I disable fMMS???

The only way I have found is to uninstall it when I don't wish to use it (there are specific times I don't want it running).
Well, it's going to notify you whenever you get an MMS push from your operator - if you want to disable any connection mode so it doesnt try to download while roaming or similar do:
gconftool-2 -st int /apps/fmms/connmode 10


Originally Posted by maxximuscool View Post
I keep getting "Unknown Sender" message and then it show "00000" in the inbox. Clearly it need to fetch the number out of the recieved log somehow and then translate it into numbers then comparing it with the contacts.

Seems to be a bug I guess.
Could you get me a log?


Originally Posted by romanianusa View Post
Why can't this thing work with wi-fi? As long as i have internet access...i should be able to download pictures. It shouldn't just work with 3G ONLY. I don't have data plan. I just feel like this thing should work without data plan.

I mean i used to have an old old cell phone...like 10yrs ago and that phone can download pictures that come through txt messenging through verizon. And this so called hi tech N900 can't even download picture?? Would it be better to create a program that just access internet without going through Tmobile server?? Maybe that's what email is for...but still if i can use the phone to txt message, i should be able to download images like 10 yrs ago.
Great - I was starting to miss you whinging in here.
Your 10 year old phone is doing it pretty much the same way as fMMS does it - just it doesn't tell you it goes online to fetch the message (as long as it an MMS, that is), sorry.

Originally Posted by terrymulligan View Post
hi, thanks for the post. i'm trying to use the fMMS app in netherlands using the latest version(july 17 2010) using the config values for netherlands and kpn from the wiki maemo blog but i'm getting a large yellow error window that has what looks like the source code listed out, and of course the mms doesnt send...

any ideas?

thanks
Post the log file, please

Originally Posted by Dragon_Orb View Post

When I go to the message fMMS says downloading, then the downloading message goes away with no errors reported but every single time I try to open the message it just downloads again. I have sent and received other MMS messages since receiving this one as well.

I'm running fMMS 1.1.9 on PR 1.2 and my carrier is Telstra (Australia). I've tried receiving the message in both havoc and polite modes. I've attached the logs, any assistance would be greatly appreciated
Seems there is some error when fMMS tries to parse it (content-length 50 sounds very small as well).

Could you attach /home/user/.fmms/mms/2tidcmms61438221871_1q19dg/message in an email to fmms@frals.se and mention your username here and a link to your post and I'll look in to it when I have more spare time



Thanks everyone for the kind words and your continuous suggestions - I'm sorry I haven't been active the last ~month but I'm still busy getting settled in both at work and in Finland so might still be a while before I have time for any bigger updates.


PS. Sorry if I missed some posts, too many unread posts >_<
__________________

Problem with fMMS? Run in x-terminal: cp /tmp/fmms.log /home/user/MyDocs/
After that you'll see fmms.log in filemanager or when you connect the device to your desktop as a mass storage device.
E-mail the log to me, if you don't have the email address, drop me a PM. Thanks!

fMMS - MMS for your N900
fAPN - GUI for adding a new GPRS APN
If you like this post, don't be shy to thank me -->
 

The Following 4 Users Say Thank You to frals For This Useful Post:
Posts: 51 | Thanked: 63 times | Joined on Jun 2010 @ Klein/Spring, Texas, USA
#502
Settings seems wrong, please double and triple check that all settings are correct
I have changed and checked my settings multiple times according to the advice of T-Mobile USA with regard to the N97, according to the advice of every user in this thread who has suggested settings that work with T-Mobile USA and also according to the MMS wiki.

Still the same error message. :/
 
Posts: 81 | Thanked: 10 times | Joined on May 2010 @ Germany
#503
i haven't read the complete thread (too long :-) ), so maybe there was already such a request and a corresponding answer:

a) Is it possible to have all MMS listed like in the conversation dialog (sms), such that there isn't an entry for each MMS but only one for each addresser? My emails are forwarded to my N900 via MMS and the MMS-Conversation-list is huge when each email is listed separatedly. It would be more convenient if all MMS are grouped by the person who sent the MMS.

b) If there's no entry in the the contacts list (i.e. the address book) then the addresser is not displayed correctly. It seems that an arbitrary contact name is chosen from the address book. If you open an MMS and look at the header, you can see the correct address.


fmms is really nice! I hope these (smaller) issues can be resolved, too :-)

Thanks,
nexus
 
niqbal's Avatar
Posts: 474 | Thanked: 368 times | Joined on Jan 2010
#504
Added a new wiki entry (http://wiki.maemo.org/mms). Settings for Warid, Pakistan are:

fAPN
add a new apn -> Warid MMS

Internet Connections -> Warid MMS -> Edit
Access Point Name: mms.warid
HTTP Proxy: 10.4.2.1
Port Number: 8080

fMMS Settings
Access Point Name: mms.warid
MMSC: http://10.4.0.132/servlets/mms
username:
password:
HTTP Proxy: 10.4.2.1
Port Number: 8080

------

manually connect to Warid MMS before using fMMS

Last edited by niqbal; 2010-07-20 at 22:48.
 
Posts: 113 | Thanked: 6 times | Joined on Jan 2010
#505
how do I receive a MMS? I can send them but I receuve a text message from my operator to check online the mms...
 
Posts: 81 | Thanked: 10 times | Joined on May 2010 @ Germany
#506
this thread is already so huge, I wonder if the author of fmms is still reading these late responses to fmms :-)

Is there a better way to give feedback to a package via this website?

thanks,
nexus
 
Posts: 204 | Thanked: 31 times | Joined on Mar 2010 @ Rochdale UK
#507
Fully working and tested with T-Mobile UK settings.

I can send and recieve images, the mms connection connects and disconnects and needed when needed automatically.

all ok from my end.

n900
pr1.2
fmms latest release.
__________________
A microprocessor is the most complex manufactured product on earth and the majority of you have one in your pocket. #Intel

Please follow me on Twitter

www.twitter.com/marcdixon
 
oxpo's Avatar
Posts: 168 | Thanked: 108 times | Joined on Oct 2009 @ Luleå, Sweden
#508
Originally Posted by rickrvo View Post
how do I receive a MMS? I can send them but I receuve a text message from my operator to check online the mms...
You have to contact your operator and have them make sure that your, on there side, they have the settings that your phone is mms-capable. If the settings on the operator-side isn't set like that, you will only recieve a sms with a link to an online service for checking mms.

Hope this helps

/oxpo
 

The Following User Says Thank You to oxpo For This Useful Post:
woody14619's Avatar
Posts: 1,455 | Thanked: 3,309 times | Joined on Dec 2009 @ Rochester, NY
#509
Originally Posted by oxpo View Post
If the settings on the operator-side isn't set like that, you will only recieve a sms with a link to an online service for checking mms.
Some providers will change your setting automatically if it sees you sending an MMS as well. You may want to try sending one to yourself or a friend too, if calling your provider is a hassle or is currently not an option.
 
Posts: 113 | Thanked: 6 times | Joined on Jan 2010
#510
do i have to be connected to the apn that i created everytime some one sends me a mms or when I receive it it will automaticly be shown on the n900?
 
Reply

Tags
bada rox, bada rulez, fmms, mms, mms config, n900, python


 
Forum Jump


All times are GMT. The time now is 22:55.