Active Topics

 


Reply
Thread Tools
Posts: 82 | Thanked: 10 times | Joined on Mar 2010
#21
Ping your router...
 
Posts: 85 | Thanked: 7 times | Joined on Feb 2010 @ Saudi Arabia
#22
Originally Posted by unsane View Post
LAN (Local Area Network) ie. your local network or wifi connection.
Could you access the internet with your laptop via the wifi?
Also, can you open terminal and run:
Code:
ifconfig
and post the results?
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:105 errors:0 dropped:0 overruns:0 frame:0
TX packets:105 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5539 (5.4 KiB) TX bytes:5539 (5.4 KiB)

phonet0 Link encap:UNSPEC HWaddr 15-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP POINTOPOINT RUNNING NOARP MTU:4000 Metric:1
RX packets:329 errors:0 dropped:0 overruns:0 frame:0
TX packets:254 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:16868 (16.4 KiB) TX bytes:6846 (6.6 KiB)

wlan0 Link encap:Ethernet HWaddr 00:BD:3A:72:E7:92
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:226 errors:0 dropped:0 overruns:0 frame:0
TX packets:343 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:26288 (25.6 KiB) TX bytes:59989 (58.5 KiB)

wmaster0 Link encap:UNSPEC HWaddr 00-1F-DF-54-AC-4B-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
 
Posts: 12 | Thanked: 5 times | Joined on May 2010 @ Denmark
#23
Just a few quick questions:
1. DHCP is set up on the router. I'm assuming it's enabled on the phone too.
2. Can you ping the routers IP?
3. Can you ping an outside IP like 74.125.77.99?
4. Can you ping an outside address like 'google.com'?

Try all these from the N900 and report back. You'll need to be root to ping as well.

Last edited by unsane; 2010-08-01 at 15:53. Reason: Clarification
 
Posts: 85 | Thanked: 7 times | Joined on Feb 2010 @ Saudi Arabia
#24
Originally Posted by unsane View Post
Just a few quick questions:
1. DHCP is set up on the router. I'm assuming it's enabled on the phone too.
2. Can you ping the routers IP?
3. Can you ping an outside IP like 74.125.77.99?
4. Can you ping an outside address like 'google.com'?

Try all these from the N900 and report back. You'll need to be root to ping as well.
All are working to ping except the google.com. it's stop, not ping...
 
Posts: 12 | Thanked: 5 times | Joined on May 2010 @ Denmark
#25
Seems like a DNS problem. If DHCP is enabled on the phone, you don't need to specify DNS there (AFAIK). Check DNS settings on your router, do they compare to your internet provider?
 
Posts: 85 | Thanked: 7 times | Joined on Feb 2010 @ Saudi Arabia
#26
Originally Posted by unsane View Post
Seems like a DNS problem. If DHCP is enabled on the phone, you don't need to specify DNS there (AFAIK). Check DNS settings on your router, do they compare to your internet provider?
Ok, please tell me how i can do that on my device.
 
Posts: 12 | Thanked: 5 times | Joined on May 2010 @ Denmark
#27
There's a field for DNS server settings in your third screenshot. Get the DNS IP adresses from your provider and enter them there. I'd have to refer you to your router manual for more specific instructions.
 
Posts: 85 | Thanked: 7 times | Joined on Feb 2010 @ Saudi Arabia
#28
Originally Posted by unsane View Post
There's a field for DNS server settings in your third screenshot. Get the DNS IP adresses from your provider and enter them there. I'd have to refer you to your router manual for more specific instructions.
Ok thank, i can see that. 1 quick question, how can i put that in my device? I dont know where i can i put that DNS? In what particular place? Please advise.

Also, i observed that in Radio Type of every connection has 802.11g but mine is 802.11n, do you think is that the caused? If so, please can you advise how can i change that into "g"?
 
Posts: 12 | Thanked: 5 times | Joined on May 2010 @ Denmark
#29
You don't need to specify DNS on N900 if you use DHCP ('obtain IP adress automatically', I believe it's called in the menu) under the 'Advanced' tab. You'll need to specify on your router though, refer to your manual as to where.
In the first screenshot you can see where you can change radiotype on the router. AFAIK its not necessary on the N900 its only 802.11 b/g compatible anyway.
It would probably help if you could post make and model of your router.
 
Posts: 992 | Thanked: 738 times | Joined on Jun 2010 @ Low Earth Orbit
#30
Originally Posted by edcarsky View Post
Also, i observed that in Radio Type of every connection has 802.11g but mine is 802.11n, do you think is that the caused?
In your screenshot you have 802.11b/g/n which is OK, no need to change. Do you have any devices other than N900 and are they able to use the wlan without any problems? If so then your router should be configured OK.

As unsane said it's a DNS problem on your N900.

On the N900 go edit your connection. Click "Next" until you get to the last screen then click "Advanced". Under the "IP Addresses" tab select "Auto-retrieve IP address" and select "Auto-retrieve DNS", then "Save" and "Finish".

Last edited by kureyon; 2010-08-01 at 18:05.
 

The Following User Says Thank You to kureyon For This Useful Post:
Reply


 
Forum Jump


All times are GMT. The time now is 15:15.