Active Topics

 



Notices
Page 34 of 68 « First 243233 34 353644 Last »
Reply
Thread Tools
hqh is offline hqh
2010-08-18 , 13:26
Posts: 388 | Thanked: 842 times | Joined on Sep 2009 @ Finland
#331
Originally Posted by mtran66 View Post
The app hangs at "updating catalogs" for me

I'm currently connected via edge/2g. the normal app manager works fine.

It doesn't appear to be doing anything either. I ran conky and there is no download/upload and the cpu is minimal
It's probably waiting a reply from some repo which doesn't respond. It should eventually timeout and the log should show what repository it was.

Originally Posted by rantom View Post
I'd have a feature suggestions for future versions.

1. Show in the application list with different colors, that what version of the app is available (meaning -testing and -devel).
2. While installing user could choose which version to install. I for one don't know now which version I'm running of Pidgin Protocols Plugin, since the decsription said it was from -devel/-testing.
There are some technical difficulties related to that.
First, fapman only keeps record of the latest version of every package available (since that's what apt-get normally installs anyway when asked). Changing that would require a lot of work.
Second, it's possible to tell apt-get to install a specific version of a package but the dependencies would still get pulled from whatever repo that has the latest versions of them. Could lead to problems.

Multiple repositories are shown for packages that have the same version of them available in all of the listed repositories. It also shows you the version number, you know...

If you don't want to install from a certain repository, then you'll have to disable it.

Originally Posted by medri View Post
since I installed fap I couldn't update any programm.
For this reason I uninstalled it again. Now I cannot upgrade any program with the built-in appmanager. And I can't install fapman either...
It's likely that there are broken packages/dependencies in your system. Running apt-get from command line should reveal those.
 

The Following User Says Thank You to hqh For This Useful Post:
ndi's Avatar
ndi is offline ndi
2010-08-18 , 15:44
Posts: 2,050 | Thanked: 1,425 times | Joined on Dec 2009 @ Bucharest
#332
Could we get an option to where fapman stores cache? I'd like to reuse the apt-get update. For example, I could schedule apt-get to update every few hours when a certain wifi is up (like home) so that my repos are never over a few hours old. I can't use that with fapman. I understand that separation helps with confusion, but an option can't hurt, right?

Also, is it a decision to not remember the last sort order (reverts to name ever app start) or is it simply not implemented yet?

Oh, and, a small bug (might be already reported): When in portrait mode and updating catalogs, the "finished" yellow banner reverts app to landscape and it doesn't rotate back until I go to landscape and then portrait again.
__________________
N900 dead and Nokia no longer replaces them. Thanks for all the fish.

Keep the forums clean: use "Thanks" button instead of the thank you post.
 

The Following 2 Users Say Thank You to ndi For This Useful Post:
rantom
2010-08-19 , 07:55
Guest | Posts: n/a | Thanked: 0 times | Joined on
#333
Odd. I tried to install Facebrick and Situare from fapman and got an error. Here's the log.

Code:
Building dependency tree...
Reading state information...
The following extra packages will be installed:
  libqfacebook
The following NEW packages will be installed:
  facebrick libqfacebook situare
0 upgraded, 3 newly installed, 0 to remove and 34 not upgraded.
4 not fully installed or removed.
Inst libqfacebook (0.1.2 Extras-devel:2.0/fremantle)
Inst facebrick (0.5 Extras-devel:2.0/fremantle)
Inst situare (1.0-0 Extras-testing:2.0/fremantle, Extras-devel:2.0/fremantle)
Conf python-cairo (1.4.12-1.2maemo2 Extras-testing:2.0/fremantle, Extras-devel:2.0/fremantle)
Conf python-osso (0.4-0maemo5 Extras-testing:2.0/fremantle, Extras-devel:2.0/fremantle)
Conf python-support (1.0.6maemo1 Extras-testing:2.0/fremantle, Extras-devel:2.0/fremantle)
Conf python-conic (0.1-6 Extras-testing:2.0/fremantle, Extras-devel:2.0/fremantle)
Conf libqfacebook (0.1.2 Extras-devel:2.0/fremantle)
Conf facebrick (0.5 Extras-devel:2.0/fremantle)
Conf situare (1.0-0 Extras-testing:2.0/fremantle, Extras-devel:2.0/fremantle)

--- 2010-08-19 10:49:39 ---
/usr/bin/apt-get -qy --allow-unauthenticated -o DPkg::options::=--force-confnew -o Dir::Etc::sourcelist=/opt/fapman-cache/sources.list -o Dir::State::lists=/opt/fapman-cache/lists -o Dir::Etc::sourceparts="" --auto-remove install situare facebrick
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
  libqfacebook
The following NEW packages will be installed:
  facebrick libqfacebook situare
0 upgraded, 3 newly installed, 0 to remove and 34 not upgraded.
4 not fully installed or removed.
Need to get 590kB of archives.
After this operation, 1389kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  libqfacebook facebrick situare
Authentication warning overridden.
Get:1 http://repository.maemo.org fremantle/free libqfacebook 0.1.2 [76,2kB]
Get:2 http://repository.maemo.org fremantle/non-free facebrick 0.5 [119kB]
Get:3 http://repository.maemo.org fremantle/free situare 1.0-0 [395kB]
Fetched 590kB in 5s (110kB/s)
Selecting previously deselected package libqfacebook.
(Reading database ... 27747 files and directories currently installed.)
Unpacking libqfacebook (from .../libqfacebook_0.1.2_armel.deb) ...
Selecting previously deselected package facebrick.
Unpacking facebrick (from .../facebrick_0.5_armel.deb) ...
Selecting previously deselected package situare.
Unpacking situare (from .../situare_1.0-0_armel.deb) ...
Setting up python-cairo (1.4.12-1.2maemo2) ...
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
'import site' failed; use -v for traceback
Traceback (most recent call last):
  File "/usr/bin/pycentral", line 3, in <module>
    import fnmatch, glob, os, re, string, sys, time, cStringIO
ImportError: No module named fnmatch
dpkg: error processing python-cairo (--configure):
 subprocess post-installation script returned error exit status 1
Setting up python-osso (0.4-0maemo5) ...
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
'import site' failed; use -v for traceback
Traceback (most recent call last):
  File "/usr/bin/pycentral", line 3, in <module>
    import fnmatch, glob, os, re, string, sys, time, cStringIO
ImportError: No module named fnmatch
dpkg: error processing python-osso (--configure):
 subprocess post-installation script returned error exit status 1
Setting up python-support (1.0.6maemo1) ...
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
'import site' failed; use -v for traceback
Traceback (most recent call last):
  File "/usr/sbin/update-python-modules", line 11, in <module>
    import sys,os,shutil
ImportError: No module named os
dpkg: error processing python-support (--configure):
 subprocess post-installation script returned error exit status 1
Setting up python-conic (0.1-6) ...
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
'import site' failed; use -v for traceback
Traceback (most recent call last):
  File "/usr/bin/pycentral", line 3, in <module>
    import fnmatch, glob, os, re, string, sys, time, cStringIO
ImportError: No module named fnmatch
dpkg: error processing python-conic (--configure):
 subprocess post-installation script returned error exit status 1
Setting up libqfacebook (0.1.2) ...
Setting up facebrick (0.5) ...
Setting up situare (1.0-0) ...
Errors were encountered while processing:
 python-cairo
 python-osso
 python-support
 python-conic
E: Sub-process /usr/bin/dpkg returned an error code (1)
Both applications do seem to be installed though..

EDIT : More. I tried to uninstall both apps at the same time and got this.

Code:
--- 2010-08-19 11:21:29 ---
Finished reading package lists
--- 2010-08-19 11:21:29 ---
Start fetching package dates
--- 2010-08-19 11:21:30 ---
need to fetch date for 0 packages
--- 2010-08-19 11:21:30 ---
sent 0 requests, received 0 replies with 0 errors
--- 2010-08-19 11:21:30 ---
Finished fetching package dates
--- 2010-08-19 11:22:44 ---
/usr/bin/apt-get -qsy --allow-unauthenticated -o Dir::Etc::sourcelist=/opt/fapman-cache/sources.list -o Dir::State::lists=/opt/fapman-cache/lists -o Dir::Etc::sourceparts="" --auto-remove install situare- facebrick-
--- 2010-08-19 11:22:53 ---
Output from last process:
---
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libqfacebook
The following packages will be REMOVED:
  facebrick libqfacebook situare
0 upgraded, 0 newly installed, 3 to remove and 34 not upgraded.
4 not fully installed or removed.
Remv facebrick [0.5]
Remv libqfacebook [0.1.2]
Remv situare [1.0-0]
Conf python-cairo (1.4.12-1.2maemo2 Extras-testing:2.0/fremantle, Extras-devel:2.0/fremantle)
Conf python-osso (0.4-0maemo5 Extras-testing:2.0/fremantle, Extras-devel:2.0/fremantle)
Conf python-support (1.0.6maemo1 Extras-testing:2.0/fremantle, Extras-devel:2.0/fremantle)
Conf python-conic (0.1-6 Extras-testing:2.0/fremantle, Extras-devel:2.0/fremantle)

--- 2010-08-19 11:22:56 ---
/usr/bin/apt-get -qy --allow-unauthenticated -o DPkg::options::=--force-confnew -o Dir::Etc::sourcelist=/opt/fapman-cache/sources.list -o Dir::State::lists=/opt/fapman-cache/lists -o Dir::Etc::sourceparts="" --auto-remove install situare- facebrick-
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libqfacebook
The following packages will be REMOVED:
  facebrick libqfacebook situare
0 upgraded, 0 newly installed, 3 to remove and 34 not upgraded.
4 not fully installed or removed.
After this operation, 1389kB disk space will be freed.
(Reading database ... 27764 files and directories currently installed.)
Removing facebrick ...
Removing libqfacebook ...
Removing situare ...
Situare configuration removed
Setting up python-cairo (1.4.12-1.2maemo2) ...
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
'import site' failed; use -v for traceback
Traceback (most recent call last):
  File "/usr/bin/pycentral", line 3, in <module>
    import fnmatch, glob, os, re, string, sys, time, cStringIO
ImportError: No module named fnmatch
dpkg: error processing python-cairo (--configure):
 subprocess post-installation script returned error exit status 1
Setting up python-osso (0.4-0maemo5) ...
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
'import site' failed; use -v for traceback
Traceback (most recent call last):
  File "/usr/bin/pycentral", line 3, in <module>
    import fnmatch, glob, os, re, string, sys, time, cStringIO
ImportError: No module named fnmatch
dpkg: error processing python-osso (--configure):
 subprocess post-installation script returned error exit status 1
Setting up python-support (1.0.6maemo1) ...
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
'import site' failed; use -v for traceback
Traceback (most recent call last):
  File "/usr/sbin/update-python-modules", line 11, in <module>
    import sys,os,shutil
ImportError: No module named os
dpkg: error processing python-support (--configure):
 subprocess post-installation script returned error exit status 1
Setting up python-conic (0.1-6) ...
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
'import site' failed; use -v for traceback
Traceback (most recent call last):
  File "/usr/bin/pycentral", line 3, in <module>
    import fnmatch, glob, os, re, string, sys, time, cStringIO
ImportError: No module named fnmatch
dpkg: error processing python-conic (--configure):
 subprocess post-installation script returned error exit status 1
Errors were encountered while processing:
 python-cairo
 python-osso
 python-support
 python-conic
E: Sub-process /usr/bin/dpkg returned an error code (1)
They though seem to be uninstalled..
Last edited by rantom; 2010-08-19 at 08:28. Reason: More log.
 
hqh is offline hqh
2010-08-19 , 10:33
Posts: 388 | Thanked: 842 times | Joined on Sep 2009 @ Finland
#334
Originally Posted by ndi View Post
Could we get an option to where fapman stores cache? I'd like to reuse the apt-get update. For example, I could schedule apt-get to update every few hours when a certain wifi is up (like home) so that my repos are never over a few hours old. I can't use that with fapman. I understand that separation helps with confusion, but an option can't hurt, right?
Mayyybe... But you could run apt-get update with the same parameters than fapman does as a workaround (you can get those from the log).

Originally Posted by ndi View Post
Also, is it a decision to not remember the last sort order (reverts to name ever app start) or is it simply not implemented yet?
It's not supposed to remember it, because there's an option to set the default sort order.

Originally Posted by rantom View Post
Odd. I tried to install Facebrick and Situare from fapman and got an error. Here's the log.
Looks like a broken python package somewhere...

Version 0.6.4

* show user/hidden category apps in the list of installed apps (remove only)
* show "recommends" and "suggests" in package dependencies if there are any
* check rootfs and opt free space on startup and warn if low
* option to disable automatic catalog updates
* option to start fetching changelogs immediately when package dialog is opened
* warn about immediate conflicts when selecting a package for operation (note that this does not notice all possible conflicts)
* don't use hildon banner in portrait mode
* use the proxy settings for fetching package date information and changelogs
* package list read speed optimizations
* switched to garage bugtracker

Source is now available from garage too (git).
https://garage.maemo.org/projects/fapman/

When reporting bugs to the bugtracker, please note that broken packages/dependencies (probably the majority of errors you're going to encounter) are NOT fapman bugs. I will mark those as invalid unless they are reproducibly related to some other bug. Use this thread instead for reports about broken packages if you have to.

Maybe one more bugfix release (if required) and then I'm going to try what kind of feedback I get from extras-testing...
Last edited by hqh; 2010-08-19 at 15:13. Reason: changed "package view" to "package dialog"
 

The Following 8 Users Say Thank You to hqh For This Useful Post:
DaSilva is offline DaSilva
2010-08-20 , 08:28
Posts: 729 | Thanked: 155 times | Joined on Dec 2009
#335
I have used the new garage account to create a new feature request: https://garage.maemo.org/tracker/ind...1808&atid=6317
 
2disbetter's Avatar
2disbetter is offline 2disbetter
2010-08-20 , 08:39
Posts: 365 | Thanked: 98 times | Joined on Nov 2009
#336
recently, I've been getting a few errors in FAPMAN. (Love this app btw) It occurs when trying to install/upgrade anything. It will say an error occured (does not say which specific error) and says to look at the log. Also when trying to use the built app manager, I no longer see any apps. Just says non availible.

The olg says:

E: Invalid record in the preferences file, no Package header

2d
Last edited by 2disbetter; 2010-08-20 at 09:03.
 
vkv.raju's Avatar
vkv.raju is offline vkv.raju
2010-08-20 , 08:40
Posts: 402 | Thanked: 451 times | Joined on Dec 2007 @ India
#337
Earlier, I wasn't able to see "Angry Birds", "Bounce", "SPB Brain Evolution" in the fapman. But with this latest version, I am now seeing all my installed apps.

Great Update and a Great app/tool...

Thanks again
__________________
maemo.org - Custom Google Search
 
Rob1n is offline Rob1n
2010-08-20 , 08:44
Posts: 3,617 | Thanked: 2,412 times | Joined on Nov 2009 @ Cambridge, UK
#338
Originally Posted by 2disbetter View Post
recently, I've been getting a few errors in FAPMAN. (Love this app btw) It occurs when trying to install/upgrade anything. It will say an error occured (does not say which specific error) and says to look at the log.
And what does the log (accessible via the application menu) say?
 

The Following User Says Thank You to Rob1n For This Useful Post:
vkv.raju's Avatar
vkv.raju is offline vkv.raju
2010-08-20 , 08:45
Posts: 402 | Thanked: 451 times | Joined on Dec 2007 @ India
#339
Originally Posted by 2disbetter View Post
recently, I've been getting a few errors in FAPMAN. (Love this app btw) It occurs when trying to install/upgrade anything. It will say an error occured (does not say which specific error) and says to look at the log. Also when trying to use the built app manager, I no longer see any apps. Just says non availible.

2d
The built in app manager is a POS. It says not available but if you hold on to your patience, after few MINUTES, the app starts some processing (circle revolving thing) and then it lists the installed apps.

Today morning, the built-in app manager took around 15-20 minutes to list my installed apps. For the curious, I have installed around 20-25 apps. May be even less actually.

Extras/Ovi/Devel/Testing catalgoues were enabled.

fapman is a breather for my N900.
__________________
maemo.org - Custom Google Search
 
2disbetter's Avatar
2disbetter is offline 2disbetter
2010-08-20 , 09:04
Posts: 365 | Thanked: 98 times | Joined on Nov 2009
#340
Originally Posted by Rob1n View Post
And what does the log (accessible via the application menu) say?
Rob1n, sorry I have posted it in that post, and also below. Thanks!

E: Invalid record in the preferences file, no Package header

2d
 

The Following User Says Thank You to 2disbetter For This Useful Post:
Reply
Page 34 of 68 « First 243233 34 353644 Last »

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 17:08.

Contact Us - Home - Archive - Top