Active Topics

 


Page 1 of 2 1 2
Reply
Thread Tools
Berserk's Avatar
Berserk is offline Berserk
2010-08-23 , 19:59
Posts: 199 | Thanked: 156 times | Joined on May 2010 @ Holland
#1
EDIT:
Hmm.. 56 views and no replies, I think I'm asking too much
I've just sent the upload request with the package name 'imagesetmaker', I took a look at other apps and figured that out, sorry for asking..

Maybe I'm just worrying too much, It'll probably be easier than I think.


For reference, the original post is here:
Hi,

I just finished developing a well-featured stable version of my first Qt/C++ app "Image Set Maker" and I'd like to upload it to Extras-Devel, but I have too much questions before I can do that..
Thanks to anyone who can brighten up my knowledge about the following:

- Upload requesting
I have a Maemo.org account
I need to fill in a package name.. is that the full app name ("Image Set Maker"), or something like "imagesetmaker_0.1_armel.deb"?

- Version numbers
When testing with Nokia Qt SDK, it always transfers "imagesetmaker_0.1_armel.deb" to my N900, can I set version numbers with maemo.org?

- Autobuilder instructions
I have close to zero knowledge about Linux commands.. I really appreciate the help given on the instruction page, but unfortunately, I can't make much sense of it

- Which files should I upload?
.pro, .cpp and .h files? And/or .o files, or anythins else?

Maybe a lot of this is made clear and easy with the Extras Assistant mentioned on this page... ?

I suppose that... when I am allowed to upload and and being given a package page, I can setup a bugtacker, track downloads, see test/vote when it's gotten to Extras-Testing etc.?

- Licencing
Basically I'm looking for a licence that says "Use it at no cost, spread it, read (and learn from?) the freely available source code.. but I'm the author and copyright holder. Please give credit, don't say you made the app, because I did."


I'm starting to think I missed something, since there are so many apps in Extras(-Devel, -Testing), and I haven't found a topic that covers these questions..
Please go easy on the "RTFM" remarks
Thanks!
Last edited by Berserk; 2010-08-23 at 23:19.
 

The Following User Says Thank You to Berserk For This Useful Post:
kif's Avatar
kif is offline kif
2010-08-24 , 10:54
Posts: 60 | Thanked: 40 times | Joined on May 2010 @ Skovballe, Denmark
#2
Hi Berserk

> - Version numbers

I too have this problem, and have asked in the qt development forum.

I have gotten some answers that may solve the problem, but it requires some testing before I know if it is a solution.

I'll let you know the result.

Kim
 

The Following User Says Thank You to kif For This Useful Post:
DeargDoom is offline DeargDoom
2010-08-24 , 11:05
Posts: 66 | Thanked: 70 times | Joined on Apr 2010 @ Paris
#3
Originally Posted by kif View Post
> - Version numbers

I too have this problem, and have asked in the qt development forum.

I have gotten some answers that may solve the problem, but it requires some testing before I know if it is a solution.
I am very far from being an expert but following the wiki instructions works for me.
 

The Following 3 Users Say Thank You to DeargDoom For This Useful Post:
Berserk's Avatar
Berserk is offline Berserk
2010-08-25 , 16:24
Posts: 199 | Thanked: 156 times | Joined on May 2010 @ Holland
#4
Well.. I finally got it to upload, thanks to the wiki's

But now the autobuild fails.. I copied the rules contents from the Packaging a Qt application page, but I'm not sure how to edit the rules file.
I think I have to replace "(APPNAME)", "(CURDIR)" and "(MAKE)"? I did anyway, except the "(MAKE)", I don't know what that needs to be. Don't know if replacing is good or not either..

At the top of the rules file, it says
Code:
#!/usr/bin/make -f
APPNAME := my_app_name
When I put "APPNAME := imagesetmaker" there, will every APPNAME be replaced? I don't get it..
I really feel stupid for not understanding the rules file




I just noticed/read that "libqt4-dev" needs to be added, so this line is now in my control file:
(Didn't have "libqt4-dev" before this post)
Code:
Build-Depends: debhelper (>= 5), autotools-dev, libhildon1 (>= 2.2), libqt4-dev
__________________
Wallpaeper - Desktop background manager (in Extras!)
Config Reader - Export all Gconf to an HTML file + compare feature (Extras-testing)
Even though these programs are available for free, I would appreciate any donations
 
Berserk's Avatar
Berserk is offline Berserk
2010-08-25 , 16:40
Posts: 199 | Thanked: 156 times | Joined on May 2010 @ Holland
#5
It seems to me that things like $(CURDIR) are some sort of system variables that don't need to be specified by the developer.. I'm just not sure
__________________
Wallpaeper - Desktop background manager (in Extras!)
Config Reader - Export all Gconf to an HTML file + compare feature (Extras-testing)
Even though these programs are available for free, I would appreciate any donations
 
DeargDoom is offline DeargDoom
2010-08-26 , 00:27
Posts: 66 | Thanked: 70 times | Joined on Apr 2010 @ Paris
#6
Originally Posted by Berserk View Post
Well.. I finally got it to upload, thanks to the wiki's

But now the autobuild fails.. I copied the rules contents from the Packaging a Qt application page, but I'm not sure how to edit the rules file.
If I were you I would try and package it yourself and test installing it on your own device before uploading it to extras-devel. From your post I dont think you have done this yet.

Speaking for myself I found it quite helpful to use the qt-maemo-example package. Once you have that correctly building a package you can use it as a reference to see where you might be going wrong with your own packaging.
 

The Following 2 Users Say Thank You to DeargDoom For This Useful Post:
Berserk's Avatar
Berserk is offline Berserk
2010-08-26 , 23:23
Posts: 199 | Thanked: 156 times | Joined on May 2010 @ Holland
#7
Thanks for pointing me in the right direction!
I've tried numerous times now.. and I think it's almost working now.
So far I've had *empty* .deb's showing up, only the bin and doc dir had files in it, no icons, .desktop or .service files..

After I've prepared the folders/sources and ran "mad dh_make", I edited the files inside the debian folder, then I ran "mad qmake", and right after that I ran the "mad dpkg-buildpackage -sa" command.

The problem is.. the files that should go into debian/<appname> show up somewhere else.
(I use WinXP with Nokia Qt SDK, both installed on E: )

My source files are in
E:\QtPrograms\... etc.

While building, the necessary files go into
E:\e\QtPrograms\... etc.


I know Linux doesn't work with drive letters, but how can I fix this? :P
EDIT: I could probably (?) put those folders in the .deb with an archiver, but that's not the way it should go, I think.
__________________
Wallpaeper - Desktop background manager (in Extras!)
Config Reader - Export all Gconf to an HTML file + compare feature (Extras-testing)
Even though these programs are available for free, I would appreciate any donations
Last edited by Berserk; 2010-08-26 at 23:28.
 
fcrochik's Avatar
fcrochik is offline fcrochik
2010-08-26 , 23:36
Posts: 722 | Thanked: 1,223 times | Joined on Apr 2010 @ USA
#8
Originally Posted by Berserk View Post
Thanks for pointing me in the right direction!
I've tried numerous times now.. and I think it's almost working now.
So far I've had *empty* .deb's showing up, only the bin and doc dir had files in it, no icons, .desktop or .service files..

After I've prepared the folders/sources and ran "mad dh_make", I edited the files inside the debian folder, then I ran "mad qmake", and right after that I ran the "mad dpkg-buildpackage -sa" command.

The problem is.. the files that should go into debian/<appname> show up somewhere else.
(I use WinXP with Nokia Qt SDK, both installed on E: )

My source files are in
E:\QtPrograms\... etc.

While building, the necessary files go into
E:\e\QtPrograms\... etc.


I know Linux doesn't work with drive letters, but how can I fix this? :P
EDIT: I could probably (?) put those folders in the .deb with an archiver, but that's not the way it should go, I think.
I develop on the Nokia SDK but create my packages on scratchbox.

I have never tried to create a package using Mad but a common problem for me on scratchbox is that qmake adds the "absolute paths" to the Makefile. I always have to edit by hand the Makefile before creating the package in order for the autobuilder to work.

Just an idea ... if you think this maybe the case post your Makefile.

Felipe
__________________

My maemo work:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
For Harmattan:
GeePS - native UI around google maps - GApp - access to optimized mobile "google apps".
Shutdown - shutdown and reboot with one click - QuickCall - one click call, skypeout and google voice integration using dial tones.
WakeOnLan - wake computers on your local network.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
For Maemo/N900:
GApp - access to optimized mobile "google apps". - MobWebMail: browser optimized to access multiple gmail accounts
MyContacts: 75 Contacts on your desktop, ring tones per group and more - GeePS: native front-end for google maps
Macuco2 : web browser to access web sites optimized for the iphone - WakeOnLan: wake up computers on your local network
dbBrowser: Simple application to browse sqlite databases
 

The Following User Says Thank You to fcrochik For This Useful Post:
Berserk's Avatar
Berserk is offline Berserk
2010-08-26 , 23:41
Posts: 199 | Thanked: 156 times | Joined on May 2010 @ Holland
#9
Thanks! I'll try it, and post the Makefile in case it screws up..

In the meantime I've gotten the idea of replacing
INSTALL_ROOT=$(CURDIR)/debian/$(APPNAME) install
with
INSTALL_ROOT=debian/$(APPNAME) install
in debian/rules

Since CURDIR probably starts with /e/

EDIT: hmm.. I'd better not, I don't know where it will end up then

EDIT2:
INSTALL_ROOT=E:\QtPrograms\ImageSetMaker\0.1.2\imagesetmaker-0.1.2/debian/$(APPNAME) install
Gave a build error: "e:e:" not found

INSTALL_ROOT=QtPrograms\ImageSetMaker\0.1.2\imagesetmaker-0.1.2/debian/$(APPNAME) install
Partially worked, it put that whole path in the .deb package but with the needed folders/files! (DEBIAN, qtprograms and usr folders)
Also, "dh_shlibdebs" took quite long in the process.

INSTALL_ROOT=debian/$(APPNAME) install
Made E:\debian (wrong again)

EDIT3:
INSTALL_ROOT=$(APPNAME) install
Made E:\imagesetmaker

I'll post my Makefile then
__________________
Wallpaeper - Desktop background manager (in Extras!)
Config Reader - Export all Gconf to an HTML file + compare feature (Extras-testing)
Even though these programs are available for free, I would appreciate any donations
Last edited by Berserk; 2010-08-27 at 00:19.
 
Berserk's Avatar
Berserk is offline Berserk
2010-08-27 , 00:12
Posts: 199 | Thanked: 156 times | Joined on May 2010 @ Holland
#10
Here's my Makefile (first half of it)
It does seem to recognise E:\
Could you help me with this one?

Code:
#############################################################################
# Makefile for building: imagesetmaker
# Generated by qmake (2.01a) (Qt 4.6.2) on: vr 27. aug 02:08:55 2010
# Project:  imagesetmaker.pro
# Template: subdirs
# Command: e:/NokiaQtSDK/Maemo/4.6.2/targets/fremantle-1030/bin/qmake.exe -unix -o Makefile imagesetmaker.pro
#############################################################################

first: make_default
MAKEFILE      = Makefile
QMAKE         = e:/NokiaQtSDK/Maemo/4.6.2/targets/fremantle-1030/bin/qmake.exe
DEL_FILE      = rm -f
CHK_DIR_EXISTS= test -d
MKDIR         = mkdir -p
COPY          = cp -f
COPY_FILE     = $(COPY)
COPY_DIR      = $(COPY) -r
INSTALL_FILE  = install -m 644 -p
INSTALL_PROGRAM = install -m 755 -p
INSTALL_DIR   = $(COPY_DIR)
DEL_FILE      = rm -f
SYMLINK       = ln -f -s
DEL_DIR       = rmdir
MOVE          = mv -f
CHK_DIR_EXISTS= test -d
MKDIR         = mkdir -p
SUBTARGETS    =  \
        sub-src

src/$(MAKEFILE): 
    @$(CHK_DIR_EXISTS) src/ || $(MKDIR) src/ 
    cd src/ && $(QMAKE) e:/qtprograms/imagesetmaker/0.1.2/imagesetmaker-0.1.2/src/src.pro -unix -o $(MAKEFILE)
sub-src-qmake_all:  FORCE
    @$(CHK_DIR_EXISTS) src/ || $(MKDIR) src/ 
    cd src/ && $(QMAKE) e:/qtprograms/imagesetmaker/0.1.2/imagesetmaker-0.1.2/src/src.pro -unix -o $(MAKEFILE)
sub-src: src/$(MAKEFILE) FORCE
    cd src/ && $(MAKE) -f $(MAKEFILE)
sub-src-make_default: src/$(MAKEFILE) FORCE
    cd src/ && $(MAKE) -f $(MAKEFILE) 
sub-src-make_first: src/$(MAKEFILE) FORCE
    cd src/ && $(MAKE) -f $(MAKEFILE) first
sub-src-all: src/$(MAKEFILE) FORCE
    cd src/ && $(MAKE) -f $(MAKEFILE) all
sub-src-clean: src/$(MAKEFILE) FORCE
    cd src/ && $(MAKE) -f $(MAKEFILE) clean
sub-src-distclean: src/$(MAKEFILE) FORCE
    cd src/ && $(MAKE) -f $(MAKEFILE) distclean
sub-src-install_subtargets: src/$(MAKEFILE) FORCE
    cd src/ && $(MAKE) -f $(MAKEFILE) install
sub-src-uninstall_subtargets: src/$(MAKEFILE) FORCE
    cd src/ && $(MAKE) -f $(MAKEFILE) uninstall

(There's some more here.. .prf files and stuff
If needed, I'll paste the remaining contents too
__________________
Wallpaeper - Desktop background manager (in Extras!)
Config Reader - Export all Gconf to an HTML file + compare feature (Extras-testing)
Even though these programs are available for free, I would appreciate any donations
 
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 08:51.

Contact Us - Home - Archive - Top