Notices

Originally Posted by droitwichgas

1) Not sure if anybody else has come across this problem but atfer using the radio for around 15 mins it suddenly stopped working, even re-booting my phone won't get the radio to work again! The old FM radio app works without any problems so I assume it must therefore be an issue with the new app?

2) I wonder if future updates could allow the station name to be shown by being entered manually, whilst you are working on the RDS side of things?

3) I assume Set 1, Set 2 etc refers to the station names, if so, any chance of more "Set"'s being added as 3 stations is a fairly limited number?

4) Also the frequency of 102.20 etc needs to be entered as 10220, and also shows as this on the app, I wonder it it is possible to upgarade the app to show the correct frequency?

Originally Posted by gionni88

1) Sadly, it's something I can't manage. I rely on the Mobility library, and I just start and stop the radio with .start() and .stop() methods. The suddenly stops are randoms, restarting the app works to fix it, so I check if restarting the radio while the app is up works.

2) Yes, it's easily doable, custom string or rds data.

3) No, each set may have all the saved stations you wish. If you use the radio in 2different places there may be the possibility that same radio stations have different frequencies, that's why there are 3 sets available.

4) Yes, it's on todolist.

Originally Posted by Radicalz38

1) Mind if I ask if this radio app would work on our country?

2)As the limit of frequency in our country is 76.0 MHz ~ 108.0 MHz most music stations are between those frequencies but T.V channels(yes you can listen to T.V stations here) are located on the very lowest/highest ranges of the frequency.

Originally Posted by droitwichgas

1) on how you stop & start the app as it is not clear to me? Do I need to use Xterm?

2) Is there anyway the community can help you track down the issue causing the problem of the sudden stops as the old FM Radio doesn't seem to have this issue?

Originally Posted by droitwichgas

Thanks for the quick reply, could you just give me a little more info. on how you stop & start the app as it is not clear to me? Do I need to use Xterm?

Is there anyway the community can help you track down the issue causing the problem of the sudden stops as the old FM Radio doesn't seem to have this issue?

Originally Posted by gionni88

QRadio is an FM Radio application written in C++/Qt.
It uses the QtMobility/Multimedia library and has 3 renamable sets of saved stations available with a clean interface. It provides a fast manual search, a seek up and down search and a button to go to next saved station.

Actually on Extras-Devel (0.0.3 version).

ToDoList:

• Saving stations with a custom string.
• Working metadata.
• Custom Station name.
• Fixing the suddenly stops.
• 92.6 Freq format.
• Switching RegionZones inside the app.
• Integration with Recaller(switch input to device > record) if possible.
• AutoScan saving to list.

QRadio