Did you try flashing a different kernel in between

That helped me to finally get the emmc flashed...

Basically it's flashing PR1.3 then kernel from PR1.2 then EMMC and finally the PR1.3 kernel again.

Here's a small How to...

First of all you need two firmware images PR1.2 and PR1.3 for example
PR1.1.1 will work also...

Then you need a matching emmc image (PR1.3_original or a custom image file for bigger apps partition)
1. Flash PR1.3
2. Flash only Kernel of PR1.2
3. Flash your EMMC (custom or PR1.3)
4. Reflash PR1.3 firmware (see 1.) or try --flash-only=kernel but with the PR1.3 image (see 2.)

:cheers:

..::J4ZZ::..

thanks a lot buddy ll follow these steps

codetracer 10-25-10 , 05:12 AM

How to get N900 flasher to work in Windows 7 64-bit (x64).
Install Flasher 3.5 - http://tablets-dev.nokia.com/maemo-d...-downloads.php
Download libusb-win32-bin-1.2.2.0.zip - http://sourceforge.net/projects/libusb-win32/
Press U while starting N900 and attach USB
Wait for the original driver to install.
Run inf-wizard.exe (bin folder in zip) - Run as Administrator
Press "Next"
Search in list and select "0x0421 - 0x0105 - Nokia N900 (Update Mode)"
Press "Next"
Press "Next"
Save .inf file
Press "Install Now"
Press "Install this driver software anyway" on warning message.
You should get "Installation successful." and press OK.
Check Windows Device Manager for "libusb-win32 devices", expand and verify "Nokia N900 (Update Mode)" can be found.
Now you are ready to run Flasher 3.5 with your parameters.



works like charm ...

confirmed working

dude i followed the steps but when it comes to emmc step i get the same problem.i get those five dots (like when it boots) and then stops .usb device not found

i tried in win 7 64 bit..

i will try tomorrow on a xp machine. hope it works

Definitely give it a try on a win XP computer. As I posted on the last page, even win 7 32bit gave me problems.

Try to unplug -> start flasher with --kernel only from 2nd step... when "wait for suitable usb device" -> then connect again with u-key holding.... -> when kernel is flashed successfully -> try emmc again... the device should not reboot between these steps... leave the -R out !

It worked fine this way on a 64bit machine running win7 and latest libusb drivers...

good luck

i started from step 2.
but after step 2.i uexecuted step 3 in same window.failed again

the process i followed a few failed on me for the first couple of times, then worked just fine, flashed both my N900s (fiasco and emmc) with not problem.

and as j4zz said leave the -R out, it should never reboot in between

if its under warrenty try taking it back

hi guys,

Finally on a xp machine i first used emcc without R after finishing i unplugged and then executed pr 1.3 USA version and finished it without R..

successfully done .but as i said i need to wait for few days to check out if i get any problems like what happened before..

Thank you all for helping me