LOL thats an effective way ....

@peterleinchen I will try as you have suggested but most surprising thing was I also faced similar issue when I tried in kubuntu on same laptop.
It gave following error.

It worked finally after doing steps as mentioned by peterleinchen.
Many Thanks.

wrong section - moved post

Hello,

I tried to follow the recommended steps to flash, using a Mac. This is what I get:


Bogdans-MacBook-Pro:059H2M6_RM-696 NDT 64GB ROW BLACK root# flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -f
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 29, device address 7.
Device serial number is N/A
Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 30069 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 29, device address 7.
Device serial number is
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 93 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 2922 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1762 kB/s]
[x] rootfs [finished 100 % 1170282 / 1170282 kB 12270 kB/s]
Updating SW release
Success
Bogdans-MacBook-Pro:059H2M6_RM-696 NDT 64GB ROW BLACK

root# flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -F DFL61_HARMATTAN_40.2012.13-7.NOMAPS_EMMC_NOMAPS.bin --flash-only=mmc
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 29, device address 7.
Device serial number is
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image tar skipped
Image config skipped

Battery level 93 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] mmc [finished 100 % 261587 / 261587 kB 19949 kB/s]
Success
Bogdans-MacBook-Pro:059H2M6_RM-696 NDT 64GB ROW BLACK

root# flasher -R
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 29, device address 7.
Device serial number is
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Success
Bogdans-MacBook-Pro:059H2M6_RM-696 NDT 64GB ROW BLACK root#

Success as far as the eye can see, but when I boot the device I get yellow waring sign and an error like:

"Device not working properly

Try updating the device software with Nokia Software Updater...

Security problem (aegis-exec):
/usr/lob/libaegis_crypto.so.1.0.0"

Any idea on how to fix this ? I tried the suggested NSU on Windoze, but it fails at the end of the update - after it reboots the device gets hung on the NOKIA logo.

Also I should mention, that flashing on Mac seems to randomly fail at various percentage of completion. The run above is a rare struck of luck, after a few retries.

What's the normal usage for "flasher -R" ? Should the phone be left connected to USB after it boots ? I read at http://talk.maemo.org/showpost.php?p...75&postcount=1 that it should be yanked out of USB.

Any help would be much appreciated.

Thanks !

Does it apply also to the N9 ?

####¤%!! No, wrong sections, should have been in Jolla flashing thread
Guess I need some weekend somewhere, with no kids, wife - just devices and compilers

Hi all,
I decided to write here, because I have a big problem.
My N9 (product code: 059J203) suddenly stopped reading the SIM cards two days ago. Moreover, system is freezing and IMEI info is not visible.

I decided to reflash the phone. This is the log:

C:\Program Files\Nokia\Flasher>flasher.exe -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -f
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Device is in Sync and connect mode, sending ADL reboot.
ERROR: ReadFile(65540) GetOverlappedResult() error 2 timeout 4975 ms
Unable to detect flashing interface: standing by for device reboot.
Suitable USB interface (bootloader) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 9276 kB/s)
Suitable USB interface (phonet) not found, waiting...
ERROR: CreateFile, error = 5
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 92 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[_] cmt-algo [init 100 % 789 / 789 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1376 kB/s]
[_] rootfs [writing 0 % 28672 / 1170282 kB 1766 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[f] cmt-algo [init 0 % 789 / 789 kB NA ]
[-] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1376 kB/s]
[x] rootfs [finished 100 % 1170282 / 1170282 kB 10085 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Timeout while waiting for the HWBREAK
Could not reboot into cold bootmode
[Pipe 6] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>flasher.exe -F DFL61_HARMATTAN_40.2012.13-7.CENTRALEUROPE_EMMC_CENTRALEUROPE.bin -f -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version <none>
Image cert-sw not present
Image cmt-2nd not present
Image cmt-algo not present
Image cmt-mcusw not present
Image xloader not present
Image secondary not present
Image kernel not present
Image moslo not present
Image rootfs not present
Image tar not present
Image config skipped

Battery level 92 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] mmc [finished 100 % 1463443 / 1463443 kB 10908 kB/s]
Success


Do you have any ideas what can I do?
Thanks.

Same problem here, since NOKIA released the cmt update...
So Nokia bricked my N9 with their last update :-/

I flashed the phone with a higher higher release number (I think swiss firmware version), but also there I wasn't able to correctly flash cmt.

I think, I need a way to completely erase and restore the whole device but I don't think this will ever be possible.

What cmt update???