Active Topics

 



Notices


Reply
Thread Tools
kingoddball's Avatar
Posts: 1,187 | Thanked: 816 times | Joined on Apr 2010 @ Australia
#121
Mate,
Get this driver! It's damn sweet!

If you can find a network, I'd try it.
I have tested, and it works (to a point) for me!

You will need both. This is a graphical frontend for aircrack. Damn good, too!
__________________
The thanks button? Sure! You can press it! I would!

Last edited by kingoddball; 2011-01-28 at 05:28.
 
Posts: 15 | Thanked: 3 times | Joined on Aug 2010 @ Greece
#122
i intalled wl1 (tested aircrack and found my wep) and install pyqt4-full but when i try to run it from icon it doesnt do anything. i put all files and dirs in right places.
i didnt un-tar it in my phone with command. i just opened the tar and throw in the files with ssh.
i also tryied open it from Main.py but comes out with errors
 
kingoddball's Avatar
Posts: 1,187 | Thanked: 816 times | Joined on Apr 2010 @ Australia
#123
Try this:
Install all the right software (on post #1).
Untar it ON the phone.
Install python2.5-QT4
(apt-get install python) or use HAM/FAM to install python2.5-QT4
__________________
The thanks button? Sure! You can press it! I would!
 
Posts: 15 | Thanked: 3 times | Joined on Aug 2010 @ Greece
#124
Originally Posted by kingoddball View Post
Try this:
Install all the right software (on post #1).
Untar it ON the phone.
Install python2.5-QT4
(apt-get install python) or use HAM/FAM to install python2.5-QT4
no luck. python already installed and untar on the phone didnt help.. i do something wrong..
Attached Images
 

Last edited by manolos; 2011-01-28 at 06:31.
 
kingoddball's Avatar
Posts: 1,187 | Thanked: 816 times | Joined on Apr 2010 @ Australia
#125
Got rootsh and sudser installed?
__________________
The thanks button? Sure! You can press it! I would!
 
tokag's Avatar
Posts: 78 | Thanked: 69 times | Joined on Jan 2010 @ Alaska
#126
in the .desktop file i had to to change the line:

Exec=/home/user/MyDocs/FAS/Main.py

to

Exec=sh /home/user/MyDocs/FAS/launch.sh

in order to get the program to load.

Last edited by tokag; 2011-01-28 at 07:31.
 
Posts: 15 | Thanked: 3 times | Joined on Aug 2010 @ Greece
#127
Originally Posted by kingoddball View Post
Got rootsh and sudser installed?
both sudser and rootsh are installed
 
Posts: 15 | Thanked: 3 times | Joined on Aug 2010 @ Greece
#128
Originally Posted by tokag View Post
in the .desktop file i had to to change the line:

Exec=/home/user/MyDocs/FAS/Main.py

to

Exec=python /home/user/MyDocs/FAS/Main.py

in order to get the program to load.
thank you! solved my prob! actualy i changed it to Exec=sh /home/user/MyDocs/FAS/launch.sh
 
Posts: 15 | Thanked: 3 times | Joined on Aug 2010 @ Greece
#129
Originally Posted by tokag View Post
glad it work for you. i did that first, but then changed it back to:

Exec=python /home/user/MyDocs/FAS/Main.py

because launch.sh simply calls Main.py to load, which an unnecessary step.
for some strange reason python Main.py doesnt work for me at all. crashing on the start. so i use sh
 
tokag's Avatar
Posts: 78 | Thanked: 69 times | Joined on Jan 2010 @ Alaska
#130
Originally Posted by manolos View Post
for some strange reason python Main.py doesnt work for me at all. crashing on the start. so i use sh
true that. i had been fooling around a bit and i thought it was working properly. it was not. reverting back to:

Exec=sh /home/user/MyDocs/FAS/launch.sh

fixed the problem for me as well. perhaps launch.sh it isn't not so unnecessary after all...
 
Reply

Tags
aircrack, aircrack-ng, epicfacepalm, pen testing, rtfm dude!


 
Forum Jump


All times are GMT. The time now is 17:43.