Page 147 of 536 « First 137145146 147 148149157 Last »
Poll: Do you think its possible to overclock the N900?!
Poll Options
Do you think its possible to overclock the N900?!

Reply
Thread Tools
cpate99 is offline cpate99
2010-04-07 , 02:23
Posts: 98 | Thanked: 6 times | Joined on Apr 2010
#1461
I have updated to 900 mhz on comp.... straight noob here..... i did the update and to get back the phone info in settings i did...
sudo gainroot
the apt-get install --reinstall firmware etc........
but instead of generic pr or 003 I used 002
works amazing
 
Faz's Avatar
Faz is offline Faz
2010-04-07 , 02:27
Posts: 284 | Thanked: 80 times | Joined on Mar 2007 @ London, UK
#1462
Originally Posted by tape_ape View Post
does this mean anything?

[31403.250427] WARNING: at /home/builder1/maemo-fremantle-armel-extras-devel/work/kernel-maemo-2.6.28/arch/arm/mach-omap2/clock34xx.c:443 omap3_noncore_dpll_set_rate+0x28c/0x2dc()
~ $
I'm getting these too.
Looks like a warning when it's changing to non-standard frequencies.

I don't believe this is anything to be worried about, but could be very wrong...


Code:
[10145.506072] ------------[ cut here ]------------
[10145.506103] WARNING: at /home/builder1/maemo-fremantle-armel-extras-devel/work/kernel-maemo-2.6.28/arch/arm/mach-omap2/clock34xx.c:443 omap3_noncore_dpll_set_rate+0x28c/0x2dc()
[10145.506134] Modules linked in: vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap omaplfb pvrsrvkm bridgedriver g_file_storage ipv6 uinput board_rx51_camera omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev mousedev smc91x mii wl12xx omap_wdt omap_ssi mmc_block mac80211 crc7 tsc2005 omap_hsmmc nokia_av mmc_core hci_h4p bluetooth fmtx_si4713 et8ek8 lis302dl ad5820 videodev v4l1_compat compat_ioctl32 adp1653 leds_lp5523 tsl2563 smia_sensor smiaregs v4l2_int_device rtc_twl4030 rtc_core twl4030_wdt leds_twl4030_vibra led_class
[10145.506317] [<c0030470>] (dump_stack+0x0/0x14) from [<c0056e14>] (warn_on_slowpath+0x4c/0x68)
[10145.506347] [<c0056dc8>] (warn_on_slowpath+0x0/0x68) from [<c003da9c>] (omap3_noncore_dpll_set_rate+0x28c/0x2dc)
[10145.506378]  r6:c038833c r5:60000053 r4:c038d2ec
[10145.506378] [<c003d810>] (omap3_noncore_dpll_set_rate+0x0/0x2dc) from [<c0035a48>] (omap2_clk_set_rate+0x20/0x24)
[10145.506408] [<c0035a28>] (omap2_clk_set_rate+0x0/0x24) from [<c0041214>] (clk_set_rate+0x98/0x118)
[10145.506439] [<c004117c>] (clk_set_rate+0x0/0x118) from [<c003deb0>] (program_opp+0xd0/0x18c)
[10145.506469]  r7:00000008 r6:00000000 r5:00000040 r4:c03b29c0
[10145.506469] [<c003dde0>] (program_opp+0x0/0x18c) from [<c003e06c>] (resource_set_opp_level+0x100/0x170)
[10145.506500] [<c003df6c>] (resource_set_opp_level+0x0/0x170) from [<c003e120>] (set_opp+0x44/0xb4)
[10145.506530]  r8:c038d5bc r7:c038d790 r6:00000008 r5:c03b29c0 r4:00000008
[10145.506530] [<c003e0dc>] (set_opp+0x0/0xb4) from [<c0049a64>] (update_resource_level+0x5c/0x80)
[10145.506561]  r5:c03b29d0 r4:c038d574
[10145.506591] [<c0049a08>] (update_resource_level+0x0/0x80) from [<c0049d84>] (resource_request_locked+0x144/0x15c)
[10145.506622]  r7:c038d790 r6:00000008 r5:c03b29d0 r4:c038d574
[10145.506622] [<c0049c40>] (resource_request_locked+0x0/0x15c) from [<c003ddb8>] (set_freq+0x98/0xc0)
[10145.506652]  r7:c038d790 r6:c038d718 r5:2faf0800 r4:c0334656
[10145.506652] [<c003dd20>] (set_freq+0x0/0xc0) from [<c0049a64>] (update_resource_level+0x5c/0x80)
[10145.506683]  r9:c03aad54 r8:cf187300 r7:c0390588 r6:2faf0800 r5:c03b36c8
[10145.506713] r4:c038d5bc
[10145.506713] [<c0049a08>] (update_resource_level+0x0/0x80) from [<c0049d84>] (resource_request_locked+0x144/0x15c)
[10145.506744]  r7:c0390588 r6:2faf0800 r5:c03b36c8 r4:c038d5bc
[10145.506744] [<c0049c40>] (resource_request_locked+0x0/0x15c) from [<c0049dd0>] (resource_request+0x34/0x4c)
[10145.506774]  r7:c0390588 r6:2faf0800 r5:c03b36c8 r4:c0334656
[10145.506774] [<c0049d9c>] (resource_request+0x0/0x4c) from [<c0049624>] (omap_pm_cpu_set_freq+0x34/0x44)
[10145.506805]  r7:000c1fc5 r6:c038d718 r5:2faf0800 r4:00000009
[10145.506835] [<c00495f0>] (omap_pm_cpu_set_freq+0x0/0x44) from [<c0048494>] (omap_target+0x60/0x78)
[10145.506835] [<c0048434>] (omap_target+0x0/0x78) from [<c0205b04>] (__cpufreq_driver_target+0x30/0x40)
[10145.506866]  r7:00000001 r6:000cf850 r5:0000a64c r4:c03aad54
[10145.506896] [<c0205ad4>] (__cpufreq_driver_target+0x0/0x40) from [<c02084d4>] (do_dbs_timer+0x270/0x2d8)
[10145.506927] [<c0208264>] (do_dbs_timer+0x0/0x2d8) from [<c006907c>] (run_workqueue+0xd4/0x198)
[10145.506958] [<c0068fa8>] (run_workqueue+0x0/0x198) from [<c0069e1c>] (worker_thread+0xf0/0x104)
[10145.506958]  r9:00000000 r8:00000000 r7:cf10a500 r6:cf1b8000 r5:cf0f8d00
[10145.506988] r4:cf1b9fb8
[10145.506988] [<c0069d2c>] (worker_thread+0x0/0x104) from [<c006d0a0>] (kthread+0x54/0x80)
[10145.507019]  r7:00000000 r6:00000000 r5:c0069d2c r4:cf10a500
[10145.507019] [<c006d04c>] (kthread+0x0/0x80) from [<c0059fac>] (do_exit+0x0/0x7a8)
[10145.507049]  r5:00000000 r4:00000000
[10145.507080] ---[ end trace 3325061d8a0754d0 ]---
 
SD. is offline SD.
2010-04-07 , 02:47
Posts: 122 | Thanked: 121 times | Joined on Mar 2010
#1463
Originally Posted by qole View Post
Not sure if this has already been posted, but today, Peter@Maemo and Tekojo (both Nokia employees) have reiterated the official stance: Do not overclock the N900, it is a bad idea and it will void the warranty.
I don't think they can detect it unless you fry it and they read the memory and find the kernel when you send it in for repair.

If your warranty request has nothing to do with frying due to overclocking I don't see how they can deny you. Just flash back to stock before you get the USB plug fixed or whatever other problem that might occur. The warranty is only for one year anyway.
 
Andy214 is offline Andy214
2010-04-07 , 02:56
Posts: 78 | Thanked: 30 times | Joined on Mar 2010
#1464
Originally Posted by qole View Post
Not sure if this has already been posted, but today, Peter@Maemo and Tekojo (both Nokia employees) have reiterated the official stance: Do not overclock the N900, it is a bad idea and it will void the warranty.
Pathethic, is this N900/Maemo? Sound to me like N900/Maemo is worst than other OS/devices?

Look at Android, they have a very well built app for OC with intelligent features such as CPU Governor, and profiles to limit the clock at certain conditions.
http://rootyourdroid.info/guides/ove...ing-the-droid/

OC is inevitable, why not do something that's better to make things better and controlled, rather than just say NO, but others will still do it.

I mean, if we want to OC, we should have a good controlled condition OC. There will still be people who will risk further nonetheless.
 
shazosbourne's Avatar
shazosbourne is offline shazosbourne
2010-04-07 , 02:57
Posts: 257 | Thanked: 205 times | Joined on Jan 2010 @ Sydney, Australia
#1465
Originally Posted by qole View Post
Not sure if this has already been posted, but today, Peter@Maemo and Tekojo (both Nokia employees) have reiterated the official stance: Do not overclock the N900, it is a bad idea and it will void the warranty.
What warranty?
Nokia Australia won't honour their warranty here anyway. Bastards.
I'd have to post it 12000 klm's to the US for warranty.
Besides, they wanted community development. They're getting it!
Last edited by shazosbourne; 2010-04-07 at 03:00.
 

The Following User Says Thank You to shazosbourne For This Useful Post:
geneven is offline geneven
2010-04-07 , 03:04
Posts: 5,795 | Thanked: 3,151 times | Joined on Feb 2007 @ Agoura Hills Calif
#1466
Yes, I read this threat from Nokia in Twitter hours ago.

My warranty was voided long ago. Anyway, Unless something happens that is clearly Nokia's fault, I won't complain and I won't ask for anything. And I think it's impossible for anything to happen that is Nokia's fault at this point, except for the USB port going bad, which would presumably not be due to overclocking.
 

The Following 2 Users Say Thank You to geneven For This Useful Post:
Alex Atkin UK is offline Alex Atkin UK
2010-04-07 , 03:09
Posts: 716 | Thanked: 303 times | Joined on Sep 2009 @ Sheffield, UK
#1467
Anyone know what this is all about in dmesg?
Code:
[  210.907440] WARNING: at /home/builder1/maemo-fremantle-armel-extras-devel/work/kernel-maemo-2.6.28/arch/arm/mach-omap2/clock34xx.c:443 omap3_noncore_dpll_set_rate+0x28c/0x2dc()                                                                                                                                                                 
[  210.907470] Modules linked in: vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap omaplfb pvrsrvkm bridgedriver g_file_storage ipv6 uinput board_rx51_camera omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech mousedev smc91x mii wl12xx omap_wdt omap_ssi mmc_block mac80211 crc7 tsc2005 omap_hsmmc nokia_av mmc_core hci_h4p bluetooth et8ek8 fmtx_si4713 videodev lis302dl ad5820 v4l1_compat compat_ioctl32 adp1653 leds_lp5523 tsl2563 smia_sensor smiaregs v4l2_int_device rtc_twl4030 rtc_core twl4030_wdt leds_twl4030_vibra led_class joydev                                
[  210.907623] [<c0030470>] (dump_stack+0x0/0x14) from [<c0056e14>] (warn_on_slowpath+0x4c/0x68)                                                                          
[  210.907684] [<c0056dc8>] (warn_on_slowpath+0x0/0x68) from [<c003da9c>] (omap3_noncore_dpll_set_rate+0x28c/0x2dc)                                                       
[  210.907714]  r6:c038833c r5:60000113 r4:c038d2ec                                                                                                                       
[  210.907714] [<c003d810>] (omap3_noncore_dpll_set_rate+0x0/0x2dc) from [<c0035a48>] (omap2_clk_set_rate+0x20/0x24)                                                      
[  210.907745] [<c0035a28>] (omap2_clk_set_rate+0x0/0x24) from [<c0041214>] (clk_set_rate+0x98/0x118)                                                                     
[  210.907775] [<c004117c>] (clk_set_rate+0x0/0x118) from [<c003deb0>] (program_opp+0xd0/0x18c)                                                                           
[  210.907775]  r7:00000008 r6:00000000 r5:00000040 r4:c03b29c0                                                                                                           
[  210.907806] [<c003dde0>] (program_opp+0x0/0x18c) from [<c003e06c>] (resource_set_opp_level+0x100/0x170)                                                                
[  210.907836] [<c003df6c>] (resource_set_opp_level+0x0/0x170) from [<c003e120>] (set_opp+0x44/0xb4)                                                                      
[  210.907836]  r8:c038d5bc r7:c038d790 r6:00000008 r5:c03b29c0 r4:00000008                                                                                               
[  210.907867] [<c003e0dc>] (set_opp+0x0/0xb4) from [<c0049a64>] (update_resource_level+0x5c/0x80)                                                                        
[  210.907897]  r5:c03b29d0 r4:c038d574                                                                                                                                   
[  210.907897] [<c0049a08>] (update_resource_level+0x0/0x80) from [<c0049d84>] (resource_request_locked+0x144/0x15c)                                                      
[  210.907928]  r7:c038d790 r6:00000008 r5:c03b29d0 r4:c038d574                                                                                                           
[  210.907928] [<c0049c40>] (resource_request_locked+0x0/0x15c) from [<c003ddb8>] (set_freq+0x98/0xc0)                                                                    
[  210.907958]  r7:c038d790 r6:c038d718 r5:2faf0800 r4:c0334656
[  210.907958] [<c003dd20>] (set_freq+0x0/0xc0) from [<c0049a64>] (update_resource_level+0x5c/0x80)
[  210.907989]  r9:c03aad54 r8:cf18b300 r7:c0390588 r6:2faf0800 r5:c03b36c8
[  210.908020] r4:c038d5bc
[  210.908020] [<c0049a08>] (update_resource_level+0x0/0x80) from [<c0049d84>] (resource_request_locked+0x144/0x15c)
[  210.908050]  r7:c0390588 r6:2faf0800 r5:c03b36c8 r4:c038d5bc
[  210.908050] [<c0049c40>] (resource_request_locked+0x0/0x15c) from [<c0049dd0>] (resource_request+0x34/0x4c)
[  210.908081]  r7:c0390588 r6:2faf0800 r5:c03b36c8 r4:c0334656
[  210.908081] [<c0049d9c>] (resource_request+0x0/0x4c) from [<c0049624>] (omap_pm_cpu_set_freq+0x34/0x44)
[  210.908111]  r7:000ba4a3 r6:c038d718 r5:2faf0800 r4:00000009
[  210.908142] [<c00495f0>] (omap_pm_cpu_set_freq+0x0/0x44) from [<c0048494>] (omap_target+0x60/0x78)
[  210.908142] [<c0048434>] (omap_target+0x0/0x78) from [<c0205b04>] (__cpufreq_driver_target+0x30/0x40)
[  210.908172]  r7:00000000 r6:000dbba0 r5:0000fedf r4:c03aad54
[  210.908203] [<c0205ad4>] (__cpufreq_driver_target+0x0/0x40) from [<c02084d4>] (do_dbs_timer+0x270/0x2d8)
[  210.908233] [<c0208264>] (do_dbs_timer+0x0/0x2d8) from [<c006907c>] (run_workqueue+0xd4/0x198)
[  210.908233] [<c0068fa8>] (run_workqueue+0x0/0x198) from [<c0069e1c>] (worker_thread+0xf0/0x104)
[  210.908264]  r9:00000000 r8:00000000 r7:cf10ab00 r6:cf1b8000 r5:cf0f8d00
[  210.908294] r4:cf1b9fb8
[  210.908294] [<c0069d2c>] (worker_thread+0x0/0x104) from [<c006d0a0>] (kthread+0x54/0x80)
[  210.908325]  r7:00000000 r6:00000000 r5:c0069d2c r4:cf10ab00
[  210.908325] [<c006d04c>] (kthread+0x0/0x80) from [<c0059fac>] (do_exit+0x0/0x7a8)
[  210.908355]  r5:00000000 r4:00000000
[  210.908355] ---[ end trace 3325061d8a0754d0 ]---
Am I having overclocking problems or is this something else? I haven't noticed any problems at all overclocked, just happened to check dmesg out of curiosity.
__________________
http://www.speedtest.net/result/877713446.png

My Websites
CSD Projects - Flickr - UAE4Maemo (UAE4All Compatibility List)

Favourite N900 Applications
Picodrive - UAE4All

Please post your UAE4All compatibility reports. Even better, post them to my UAE4Maemo site!
Not sure how UAE4All works such as mouse emulation? Read the FAQ.
 
Alex Atkin UK is offline Alex Atkin UK
2010-04-07 , 03:19
Posts: 716 | Thanked: 303 times | Joined on Sep 2009 @ Sheffield, UK
#1468
Originally Posted by kangou View Post
It was working well on my 600Mhz kernel, but with the 900Mhz one I've got instant reboot when I tried that (systematically). But someone said before that it was working for him.

Edit: Talking about the SmartReflex, not the scaling_max_freq
For the record, I could never get SmartReflex to work right on the STOCK kernel. First time I tried it randomly rebooted itself when it was idle, so I turned it back off.
__________________
http://www.speedtest.net/result/877713446.png

My Websites
CSD Projects - Flickr - UAE4Maemo (UAE4All Compatibility List)

Favourite N900 Applications
Picodrive - UAE4All

Please post your UAE4All compatibility reports. Even better, post them to my UAE4Maemo site!
Not sure how UAE4All works such as mouse emulation? Read the FAQ.
 
sophocha is offline sophocha
2010-04-07 , 03:51
Posts: 559 | Thanked: 166 times | Joined on Jan 2010 @ Cyprus
#1469
I`ll burst the bubble for you folks!.....I got so excited by overclocking, but it seems that my phone is not stable at 900mhz

I`m always watching a flash poker channel on justintv.....on stock kernel everything is nice and smooth....on the 900 kernel the browser crashes instantly, on the 800 kernel the browser plays fine.

Now it seems that the 600 stock kernel plays the flash content smoother than the 800 ( maybe its because the 800 kernel jumps from one frequency to the other instead of the 600 that doesn`t fluctuate )...I`ll experiment more....

Also got a 'sdcard not found' in sygic for the first time....don`t know if its overclocking related

Also the phone was hotter than stock on 900 when flash content was playing, even for 5 minutes....I wouldn`t recommend it for heavy use!
Last edited by sophocha; 2010-04-07 at 04:03.
 

The Following User Says Thank You to sophocha For This Useful Post:
-miniME- is offline -miniME-
2010-04-07 , 03:52
Posts: 42 | Thanked: 52 times | Joined on Mar 2010 @ planet earth i guess
#1470
hi

phone's ip-stack was not working this morning after a one night charging session - wlan was there but no ping possible - my e51 has no problems - and i did not have problems with n900 before with this. restart helped but ...
back to 800 from 900. just for the record.
 
Reply
Page 147 of 536 « First 137145146 147 148149157 Last »

Tags
cooking on gas, cortex-a8, faster, first to fry it wins!, hardware, its smoking, n900, need for speed, need for weed, nos, omap, omap3, omap3430, overclock, overclocking, soc, system-on-a-chip, the dogs, this thread got good!, vtec just kicked in y0!, warranty will be void, whooplah, zoom zoom

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 11:50.

Contact Us - Home - Archive - Top