Active Topics
-
TLS 1.2 for N9 is ready (29)
to MeeGo / Harmattan by smatkovi - 7 hrs, 8 mins ago -
Error after installing Leste on sdcard (12)
to Maemo 7 / Leste by teroyk - 7 hrs, 55 mins ago -
Camera phone competition March 2023 "Endless" (35)
to General by Maemish - 3 days, 16 hrs ago -
Maemo repository (3)
to Community by torsen - 4 days, 8 hrs ago -
Introducing ubiboot N9 (multiboot OS loader) (1,393)
to Alternatives by smatkovi - 6 days, 13 hrs ago - more...
|
2012-09-12
, 16:17
|
|
Posts: 2,154 |
Thanked: 8,464 times |
Joined on May 2010
|
#142
|
Hi, after long time here is prerelease kernel-power v52
Source code is in garage git, here is changelog:
kernel-power (1:2.6.28-10power52) fremantle; urgency=low
* Backport upstream patch: udf-use-hw-sector-size.diff (This fix UDF FS support on SD cards and USB disks)
* Update bq2415x_charger patch: (use kstrtol, use dev_dbg, call sysfs_notify, rename N900 charger to bq24150a, fix reporting bad values, disable charging when charger disconnected)
* Added patch kstrtol.diff which define macro kstrtol as strict_strtol
* Update into about kernel-power-bootimg package
* Package kernel-power-bootimg does not provide any features
* Enable more netfilter modules
* Added driver rx51_battery which export battery temperature, design capacity and voltage to sysfs
-- Pali Rohár <hidden> Wed, 12 Sep 2012 18:15:13 +0200
Last edited by pali; 2013-04-20 at 12:27.
Source code is in garage git, here is changelog:
kernel-power (1:2.6.28-10power52) fremantle; urgency=low
* Backport upstream patch: udf-use-hw-sector-size.diff (This fix UDF FS support on SD cards and USB disks)
* Update bq2415x_charger patch: (use kstrtol, use dev_dbg, call sysfs_notify, rename N900 charger to bq24150a, fix reporting bad values, disable charging when charger disconnected)
* Added patch kstrtol.diff which define macro kstrtol as strict_strtol
* Update into about kernel-power-bootimg package
* Package kernel-power-bootimg does not provide any features
* Enable more netfilter modules
* Added driver rx51_battery which export battery temperature, design capacity and voltage to sysfs
-- Pali Rohár <hidden> Wed, 12 Sep 2012 18:15:13 +0200
Last edited by pali; 2013-04-20 at 12:27.
| The Following 31 Users Say Thank You to pali For This Useful Post: | ||
ade, ahmadamaj, carbonjha, conred, don_falcone, enne30, ersanpermana, Estel, Fabry, foobar, freemangordon, fw190, hgroove, imo, klinglerware, knuthf, luf, magic_doc, Minhaz, misiak, Mr. Incredible, nkirk, rdorsch, reinob, sifo, sixwheeledbeast, Skaven2k2, toxaris, Uno_Cualquiera, woody14619, zeljkobo12 | ||
|
|
2012-09-12
, 17:19
|
|
Posts: 1,100 |
Thanked: 2,797 times |
Joined on Apr 2011
@ Netherlands
|
#143
|
Running 2.6.28.10-power52 now 
I do have a "side" question:
Using u-boot, I only installed the bootimage and modules. It all went okay and I could boot into power52.
But dependency problems will arise afterward (usb hostmode depending on flasher >= power51 etc.) if you don't install power-flasher and power-kernel. After installing both, the dependency problems where gone.
The question itself is: why would I need power-flasher and power-kernel (in NAND), and why do parts like usb hostmode depend on it (and not also optionally on the corresponding bootimage for example)?
I do have a "side" question:
Using u-boot, I only installed the bootimage and modules. It all went okay and I could boot into power52.
But dependency problems will arise afterward (usb hostmode depending on flasher >= power51 etc.) if you don't install power-flasher and power-kernel. After installing both, the dependency problems where gone.
The question itself is: why would I need power-flasher and power-kernel (in NAND), and why do parts like usb hostmode depend on it (and not also optionally on the corresponding bootimage for example)?
|
|
2012-09-12
, 17:57
|
|
Posts: 2,154 |
Thanked: 8,464 times |
Joined on May 2010
|
#144
|
We have decided that -bootimg packages will not provide any features. If you try to install package which depends on some feature then apt-get and HAM will install -bootimg package as default instead -flasher...
I'm preparing patch for maemo which ask user before flashing new kernel if he really want do it. So then installing -flasher package will not flash kernel without user accept.
Patch will be intellingent, it will ask only if you will change kernel (eg. nokia to kernel-power, or kernel to u-boot). When you will do updating, it should not ask...
I'm preparing patch for maemo which ask user before flashing new kernel if he really want do it. So then installing -flasher package will not flash kernel without user accept.
Patch will be intellingent, it will ask only if you will change kernel (eg. nokia to kernel-power, or kernel to u-boot). When you will do updating, it should not ask...
| The Following 11 Users Say Thank You to pali For This Useful Post: | ||
|
|
2012-09-12
, 18:56
|
|
Posts: 2,154 |
Thanked: 8,464 times |
Joined on May 2010
|
#145
|
For reading battery temperature (in tenths of Celsius), battery design capacity and voltage via new rx51_battery driver use:
$ cat /sys/class/power_supply/rx51-battery/uevent
This is new kernel driver (I wrote it yesterday) which read RAW values and convert it by RE conversation formula...
$ cat /sys/class/power_supply/rx51-battery/uevent
This is new kernel driver (I wrote it yesterday) which read RAW values and convert it by RE conversation formula...
|
|
2012-09-12
, 19:54
|
|
Posts: 15 |
Thanked: 3 times |
Joined on Jul 2012
|
#146
|
Hi
the package manager refuses to install power kernel 52 -
"not compatible" Is it possible to install with apt-get?
the package manager refuses to install power kernel 52 -
"not compatible" Is it possible to install with apt-get?
|
|
2012-09-12
, 21:06
|
|
Posts: 78 |
Thanked: 84 times |
Joined on Aug 2012
|
#147
|
Originally Posted by projekt
Quick 'n dirty way to install debs when you know what the dependencies are and have the actual package is (as root):
Hi
the package manager refuses to install power kernel 52 -
"not compatible" Is it possible to install with apt-get?
Code:
dpkg -i packagename.deb
| The Following User Says Thank You to independent For This Useful Post: | ||
|
|
2012-09-12
, 22:16
|
|
Posts: 395 |
Thanked: 509 times |
Joined on Jan 2011
@ Brisbane, Australia
|
#148
|
Installed the 52 and when I choose USB host mode it tells me "Error: charger attached".
|
|
2012-09-16
, 16:33
|
|
Posts: 112 |
Thanked: 92 times |
Joined on Nov 2010
|
#149
|
|
|
2012-09-16
, 21:23
|
|
Posts: 130 |
Thanked: 9 times |
Joined on Jul 2010
|
#150
|
how can i downgrade to kp50?
 |
| Tags |
| bq2415x_charger, bq27200, kernel-power |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 02:43.
How do I go from 51 to 51r1?