Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 5 hrs, 7 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 5 days, 17 hrs ago - more...
|
2011-03-10
, 14:40
|
|
Posts: 43 |
Thanked: 0 times |
Joined on Feb 2011
@ Bulgaria
|
#162
|
Do I have to install a ntfs driver ? If yes from where can I download it ?
When I try your command It says:
Thank you !
When I try your command It says:
user is not in the sudoers file. This insident will be reported.
 |
|
2011-03-10
, 21:06
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#163
|
@m_scofield
Do not try to sudo as root.
Either as user with sudo or as root
modprobe -a ntfs
This is the ntfs driver, coming with the power kernel (v46), but it is not loaded automatically per default (as normally there is no need for ntfs on a linux device
)
Do not try to sudo as root.
Either as user with sudo or as root
modprobe -a ntfs
This is the ntfs driver, coming with the power kernel (v46), but it is not loaded automatically per default (as normally there is no need for ntfs on a linux device
)
|
|
2011-03-10
, 22:13
|
|
Posts: 43 |
Thanked: 0 times |
Joined on Feb 2011
@ Bulgaria
|
#164
|
I did what you said, this time the error didn't appear but I still have no data in File manager 
I don't know what to do anymore
Last edited by M_Scofield; 2011-03-10 at 22:16.
I don't know what to do anymore
Last edited by M_Scofield; 2011-03-10 at 22:16.
|
|
2011-03-10
, 22:35
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#165
|
Hmm, are You using standard Nokia file manager?
I do not think, that that this will work at all.
Did You enaple ntfs module prior to starting h-e-n?
You also need to mount as Mohammad said.
I do not think, that that this will work at all.
Did You enaple ntfs module prior to starting h-e-n?
You also need to mount as Mohammad said.
|
|
2011-03-11
, 00:25
|
|
Posts: 102 |
Thanked: 140 times |
Joined on Sep 2010
@ Israel
|
#166
|
Hi,
Apparently USB CD-ROM's not working. Here's a dump of the dmesg log:
The device is identified but no /dev/sr0 is created (possibly a kernel issue?)
Here's a dmesg log for comparison taken from a Debian machine when connecting the save drive to it:
Note the last 3 lines (marked as bold) that assign the block device to the drive - They don't exist in the N900 log (even after 5 mins of waiting).
Oh, and yes, the drive is fully powered from an external source.
Thanks!
Apparently USB CD-ROM's not working. Here's a dump of the dmesg log:
Code:
hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 266.855407] usb 1-1: new high speed USB device using musb_hdrc and address 8 [ 267.004730] usb 1-1: default language 0x0409 [ 267.006408] usb 1-1: uevent [ 267.006622] usb 1-1: usb_probe_device [ 267.006652] usb 1-1: configuration #1 chosen from 1 choice [ 267.006805] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 267.007080] usb 1-1:1.0: uevent [ 267.007324] libusual 1-1:1.0: usb_probe_interface [ 267.007385] libusual 1-1:1.0: usb_probe_interface - got id [ 267.028289] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '008' [ 267.029022] usb 1-1: New USB device found, idVendor=13fd, idProduct=0842 [ 267.029052] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 267.029083] usb 1-1: Product: USB Mass Storage Device [ 267.029113] usb 1-1: Manufacturer: TSSTcorp [ 267.029144] usb 1-1: SerialNumber: SATASLIM00000000000 [ 267.029205] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 267.029266] hub 1-0:1.0: port 1 enable change, status 00000503 [ 267.117034] Initializing USB Mass Storage driver... [ 267.117431] usb-storage 1-1:1.0: usb_probe_interface [ 267.117523] usb-storage 1-1:1.0: usb_probe_interface - got id [ 267.120300] scsi0 : SCSI emulation for USB Mass Storage devices [ 267.122741] usbcore: registered new interface driver usb-storage [ 267.122802] USB Mass Storage support registered. [ 267.127136] usb-storage: device found at 8 [ 267.127166] usb-storage: waiting for device to settle before scanning [ 272.122009] usb-storage: device scan complete [ 272.123260] scsi 0:0:0:0: CD-ROM TSSTcorp USB Mass Storage 6.17 PQ: 0 ANSI: 0
Here's a dmesg log for comparison taken from a Debian machine when connecting the save drive to it:
Code:
[ 39.996064] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 40.129005] usb 1-3: New USB device found, idVendor=13fd, idProduct=0842 [ 40.129008] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 40.129010] usb 1-3: Product: USB Mass Storage Device [ 40.129012] usb 1-3: Manufacturer: TSSTcorp [ 40.129014] usb 1-3: SerialNumber: SATASLIM00000000000 [ 40.129111] usb 1-3: configuration #1 chosen from 1 choice [ 40.213776] Initializing USB Mass Storage driver... [ 40.213878] scsi4 : SCSI emulation for USB Mass Storage devices [ 40.214014] usbcore: registered new interface driver usb-storage [ 40.214017] USB Mass Storage support registered. [ 40.214096] usb-storage: device found at 4 [ 40.214097] usb-storage: waiting for device to settle before scanning [ 45.212158] usb-storage: device scan complete [ 45.212655] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TS01 PQ: 0 ANSI: 0 [ 45.221146] sr1: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 45.221765] sr 4:0:0:0: Attached scsi CD-ROM sr1 [ 45.223166] sr 4:0:0:0: Attached scsi generic sg2 type 5
Oh, and yes, the drive is fully powered from an external source.
Thanks!
|
|
2011-03-11
, 08:58
|
|
Posts: 43 |
Thanked: 0 times |
Joined on Feb 2011
@ Bulgaria
|
#167
|
Originally Posted by peterleinchen
Yes I am sure, I'm using the default Nokia file manager.
Hmm, are You using standard Nokia file manager?
I do not think, that that this will work at all.
Did You enaple ntfs module prior to starting h-e-n?
You also need to mount as Mohammad said.
I haven't enabled any ntfs module.
I am so newbie. 
All I did is that I installed the power Kernel (v46), installed h-e-n and typed that you have said (modprobe -a ntfs)
|
|
2011-03-11
, 14:07
|
|
Posts: 102 |
Thanked: 140 times |
Joined on Sep 2010
@ Israel
|
#168
|
OK, apparently the problem of not being able to mount CD-ROMs is due to the modules cdrom.ko, sr_mod.ko and sg.ko being missing from the kernel-power-modules package. I'll try to compile them from source and ask titan to include them in the official package.
| The Following User Says Thank You to NiQ For This Useful Post: | ||
|
|
2011-03-11
, 21:36
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#169
|
@m_scofield
Okay, let's try one more time.
Power kernel comes with ntfs module, but it needs to be loaded via
modprobe -a ntfs
h-e-n will give You ability to enumerate Your external HDD via USB
start h-e-n, choose speed (most probably full), press VBUS (hopefully Your HDD has external or Y-cable power supply), press enumerate
create a mount point with
mkdir /media/ntfs
now mount the enumerated sda1 manually via
mount -t ntfs /dev/sda1 /media/ntfs -o uid=29999,gid=29999,utf8,dmask=027,fmask=137
You should now be able to browse your ntfs files from within /media/ntfs folder using xterm and ls command
You may also CuteExplorer or FileBox, but not nokia file manager
Hope. this helps and was understandable enough
Okay, let's try one more time.
Power kernel comes with ntfs module, but it needs to be loaded via
modprobe -a ntfs
h-e-n will give You ability to enumerate Your external HDD via USB
start h-e-n, choose speed (most probably full), press VBUS (hopefully Your HDD has external or Y-cable power supply), press enumerate
create a mount point with
mkdir /media/ntfs
now mount the enumerated sda1 manually via
mount -t ntfs /dev/sda1 /media/ntfs -o uid=29999,gid=29999,utf8,dmask=027,fmask=137
You should now be able to browse your ntfs files from within /media/ntfs folder using xterm and ls command
You may also CuteExplorer or FileBox, but not nokia file manager
Hope. this helps and was understandable enough
| The Following User Says Thank You to peterleinchen For This Useful Post: | ||
|
|
2011-03-12
, 09:14
|
|
Posts: 270 |
Thanked: 37 times |
Joined on Sep 2010
|
#170
|
please help me, I am not able to see a key :-(
m [<c01cec9c>] (unlink1+0x108/0x114)
[46999.140167] [<c01ceb94>] (unlink1+0x0/0x114) from [<c01cfc38>] (usb_hcd_unlink_urb+0x9c/0xf8)
[46999.140258] [<c01cfb9c>] (usb_hcd_unlink_urb+0x0/0xf8) from [<c01d0af4>] (usb_kill_urb+0x84/0x14c)
[46999.140319] r7:cfc11d80 r6:cfc11d80 r5:cf0a6000 r4:00000000
[46999.140380] [<c01d0a70>] (usb_kill_urb+0x0/0x14c) from [<c01d1d78>] (usb_start_wait_urb+0x80/0x120)
[46999.140441] r6:00001388 r5:cf0a7e50 r4:00000000
[46999.140502] [<c01d1cf8>] (usb_start_wait_urb+0x0/0x120) from [<c01d1ff8>] (usb_control_msg+0xc4/0xe8)
[46999.140563] [<c01d1f34>] (usb_control_msg+0x0/0xe8) from [<c01cacec>] (hub_port_init+0x3d8/0x634)
[46999.140655] [<c01ca914>] (hub_port_init+0x0/0x634) from [<c01cc3e4>] (hub_events+0x86c/0xe64)
[46999.140716] [<c01cbb78>] (hub_events+0x0/0xe64) from [<c01ce034>] (hub_thread+0x30/0x19c)
[46999.140777] [<c01ce004>] (hub_thread+0x0/0x19c) from [<c006da90>] (kthread+0x54/0x80)
[46999.140838] r6:00000000 r5:c01ce004 r4:00000000
[46999.140899] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] (do_exit+0x0/0x7bc)
[46999.140960] r5:00000000 r4:00000000
[46999.140991] ---[ end trace 24f0a7c3bb577e01 ]---
[46999.142608] usb 1-1: khubd timed out on ep0out len=0/0
[46999.349212] usb 1-1: device not accepting address 113, error -110
[46999.349304] hub 1-0:1.0: unable to enumerate USB device on port 1
[46999.349334] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[46999.349365] hub 1-0:1.0: port 1 enable change, status 00000501
[47001.349365] hub 1-0:1.0: hub_suspend
[47001.349456] usb usb1: bus auto-suspend
[47001.349487] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[47001.349548] usb usb1: bus suspend fail, err -16
[47001.349578] hub 1-0:1.0: hub_resume
[47001.349639] hub 1-0:1.0: port 1: status 0501 change 0000
[47001.349731] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[47001.349792] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[47001.474426] usb 1-1: new high speed USB device using musb_hdrc and address 114
[47006.474365] usb 1-1: khubd timed out on ep0in len=0/64
[47011.474304] usb 1-1: khubd timed out on ep0in len=0/64
[47016.474365] usb 1-1: khubd timed out on ep0in len=0/64
[47016.599426] usb 1-1: device descriptor read/64, error -110
[47021.708526] usb 1-1: khubd timed out on ep0in len=0/64
[47025.622589] twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 1
[47026.708557] usb 1-1: khubd timed out on ep0in len=0/64
[47026.833557] usb 1-1: device descriptor read/64, error -71
[47027.067962] usb 1-1: new high speed USB device using musb_hdrc and address 115
[47027.157104] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
[47027.193359] usb 1-1: device descriptor read/64, error -71
[47027.427581] usb 1-1: device descriptor read/64, error -71
[47027.661651] usb 1-1: new high speed USB device using musb_hdrc and address 116
[47028.015533] Forced hostmode error: no device attached
[47028.083587] usb 1-1: device not accepting address 116, error -71
[47028.146087] hub 1-0:1.0: unable to enumerate USB device on port 1
[47028.146118] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[47028.146148] hub 1-0:1.0: port 1, status 0501, change 0003, 480 Mb/s
[47028.302459] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
[47028.427551] usb 1-1: new high speed USB device using musb_hdrc and address 118
[47028.552337] usb 1-1: device descriptor read/64, error -71
[47028.786682] usb 1-1: device descriptor read/64, error -71
[47029.021057] usb 1-1: new high speed USB device using musb_hdrc and address 119
[47029.146057] usb 1-1: device descriptor read/64, error -71
[47029.380706] usb 1-1: device descriptor read/64, error -71
[47029.615051] usb 1-1: new high speed USB device using musb_hdrc and address 120
[47030.036682] usb 1-1: device not accepting address 120, error -71
[47030.161773] usb 1-1: new high speed USB device using musb_hdrc and address 121
[47030.583557] usb 1-1: device not accepting address 121, error -71
[47030.583648] hub 1-0:1.0: unable to enumerate USB device on port 1
[47030.583679] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[47030.583709] hub 1-0:1.0: port 1 enable change, status 00000501
[47033.216430] hub 1-0:1.0: hub_suspend
[47033.216491] usb usb1: bus auto-suspend
[47033.216522] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[47033.216583] usb usb1: bus suspend fail, err -16
[47033.216613] hub 1-0:1.0: hub_resume
[47033.216674] hub 1-0:1.0: port 1: status 0501 change 0000
[47033.216827] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[47033.216888] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[47033.341339] usb 1-1: new high speed USB device using musb_hdrc and address 122
[47033.466430] usb 1-1: device descriptor read/64, error -71
[47033.700714] usb 1-1: device descriptor read/64, error -71
[47033.935089] usb 1-1: new high speed USB device using musb_hdrc and address 123
[47034.060089] usb 1-1: device descriptor read/64, error -71
[47034.294494] usb 1-1: device descriptor read/64, error -71
[47034.528869] usb 1-1: new high speed USB device using musb_hdrc and address 124
[47034.950714] usb 1-1: device not accepting address 124, error -71
[47035.076324] usb 1-1: new high speed USB device using musb_hdrc and address 125
[47035.497558] usb 1-1: device not accepting address 125, error -71
[47035.497650] hub 1-0:1.0: unable to enumerate USB device on port 1
[47035.497680] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[47035.497711] hub 1-0:1.0: port 1 enable change, status 00000501
[47038.216430] hub 1-0:1.0: hub_suspend
[47038.216522] usb usb1: bus auto-suspend
[47038.216552] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[47038.216583] usb usb1: bus suspend fail, err -16
[47038.216613] hub 1-0:1.0: hub_resume
[47038.216705] hub 1-0:1.0: port 1: status 0501 change 0000
[47038.216796] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[47038.216857] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[47038.341552] usb 1-1: new high speed USB device using musb_hdrc and address 126
[47038.466461] usb 1-1: device descriptor read/64, error -71
[47038.701019] usb 1-1: device descriptor read/64, error -71
[47038.935363] usb 1-1: new high speed USB device using musb_hdrc and address 127
[47039.060302] usb 1-1: device descriptor read/64, error -71
[47039.294616] usb 1-1: device descriptor read/64, error -71
[47039.528991] usb 1-1: new high speed USB device using musb_hdrc and address 2
[47039.950775] usb 1-1: device not accepting address 2, error -71
[47040.076232] usb 1-1: new high speed USB device using musb_hdrc and address 3
[47040.497711] usb 1-1: device not accepting address 3, error -71
[47040.497802] hub 1-0:1.0: unable to enumerate USB device on port 1
[47040.497833] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[47040.497863] hub 1-0:1.0: port 1 enable change, status 00000501
[47043.218170] hub 1-0:1.0: hub_suspend
[47043.218200] usb usb1: bus auto-suspend
[47043.218231] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[47043.218261] usb usb1: bus suspend fail, err -16
[47043.218261] hub 1-0:1.0: hub_resume
[47043.218322] hub 1-0:1.0: port 1: status 0501 change 0000
[47043.218353] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[47043.218414] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[47043.341339] usb 1-1: new high speed USB device using musb_hdrc and address 4
[47043.466400] usb 1-1: device descriptor read/64, error -71
[47043.700927] usb 1-1: device descriptor read/64, error -71
[47043.935211] usb 1-1: new high speed USB device using musb_hdrc and address 5
[47044.060211] usb 1-1: device descriptor read/64, error -71
[47044.294616] usb 1-1: device descriptor read/64, error -71
[47044.528961] usb 1-1: new high speed USB device using musb_hdrc and address 6
[47044.950714] usb 1-1: device not accepting address 6, error -71
[47045.075714] usb 1-1: new high speed USB device using musb_hdrc and address 7
[47045.497650] usb 1-1: device not accepting address 7, error -71
[47045.497772] hub 1-0:1.0: unable to enumerate USB device on port 1
[47045.497863] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[47045.497924] hub 1-0:1.0: port 1 enable change, status 00000501
~ $
 |
| Tags |
| awesome!, bada rox, h-e-n hostmode, more noise |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 22:49.
sudo modprobe ntfs
or
sudo modprobe -a ntfs