Active Topics
-
Firefox with Leste (10)
to Maemo 7 / Leste by teroyk - 3 days, 5 hrs ago - more...
|
2014-09-16
, 15:57
|
|
Posts: 3,328 |
Thanked: 4,476 times |
Joined on May 2011
@ Poland
|
#1692
|
Originally Posted by Estel
The thumb version has a gconf key, /apps/osso/status-area-applet-battery/use_design_capacity
Versions before 1.0-9 had some bug that insisted on using "design capacity" where it shouldn't, resulting in absurds like 3100/1240 mAh reported, when using kernel-power modules. Probably same for vanilla BME, haven't tested - the point is, that full capacity was always wrong (although, for single-cell battery users it *might* seemed like plausible, real full capacity - was fake one in reality, nonetheless).
AFAIK, version in thumb is 1.0-8, so you need to enable cssu-devel, install status-area-applet-battery (it doesn't pull any dependencies from cssu-devel), then disable cssu-devel again. YMMV, so feel free to test 1.0-8 yourself.
/Estel
I'm still worried by the known issues.
Premature shutdown: so is it possible to calibrate in any way? If not using the design capacity, won't it cause insane results?
And the wiki states that any programs using the BME replacement break after 32 cycles after last calibration. The premature shutdown issue makes it more severe, doesn't it?
| The Following User Says Thank You to marmistrz For This Useful Post: | ||
 |
|
2014-09-19
, 12:55
|
|
Posts: 5,028 |
Thanked: 8,613 times |
Joined on Mar 2011
|
#1693
|
Originally Posted by marmistrz
Yea, but before 1.0-9 version, it was doing nothing, for me. YMMV.
The thumb version has a gconf key, /apps/osso/status-area-applet-battery/use_design_capacity
Originally Posted by marmistrz
The premature shutdown thing was fixed ages ago. It nows calibrate properly before shutting down. Well, at least for me.
I'm still worried by the known issues.
Premature shutdown: so is it possible to calibrate in any way? If not using the design capacity, won't it cause insane results?
Originally Posted by marmistrz
By using the gconf key (value 0, aka "don't use go-damned-sucking design capacity, EVER! It's bad. Wrong. Just stop it.), if uncalibrated (that happens after 32 cycles without calibrating), you will get max capacity reported as default value (2048 mAh). So, nothing crashes, nothing breaks, you just get wrong value, unless you do that calibration, finally. So, everything is as it should be.
And the wiki states that any programs using the BME replacement break after 32 cycles after last calibration. The premature shutdown issue makes it more severe, doesn't it?
---
Summing it up, the only bug with latest BME Replacement that I'm aware of, is the one about still using design capacity for calculating which graphical icon (battery "fullness") to show. It's quite frustrating (as it seems that it would be few-liner fix for someone who knows what he is doing), but one can live with it...
/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
|
|
2014-09-20
, 15:20
|
|
Posts: 3,328 |
Thanked: 4,476 times |
Joined on May 2011
@ Poland
|
#1694
|
What does that "x hours / y days" in the applet mean? In my case x=5, y=6
| The Following User Says Thank You to marmistrz For This Useful Post: | ||
|
|
2014-09-20
, 18:21
|
|
Posts: 5,028 |
Thanked: 8,613 times |
Joined on Mar 2011
|
#1695
|
Estimated time 'till end of battery, active use (usage with the same current as right now, to be precise) / standby. During charging, it's the same, but untill battery gets full.
If using bq27x00 module, those estimation should come directly from charging chip. Well, at least the "active use" one, as I have no idea how it calculates the "standby" variant and it seems overestimated.
Chip gives only remaining times for usage @ actual current for usage @ average current used since last charging, and it is what BNF reports. Maybe battery applet take clculation based on lowest current used, from somewhere? No idea, as said.
Now you caould say "thanks" to me for all this BME Replacement related info, by editing the heavily outdated wiki page and stuffin' it up with what I've written in all those posts
Cheers,
/Estel
If using bq27x00 module, those estimation should come directly from charging chip. Well, at least the "active use" one, as I have no idea how it calculates the "standby" variant and it seems overestimated.
Chip gives only remaining times for usage @ actual current for usage @ average current used since last charging, and it is what BNF reports. Maybe battery applet take clculation based on lowest current used, from somewhere? No idea, as said.
Now you caould say "thanks" to me for all this BME Replacement related info, by editing the heavily outdated wiki page and stuffin' it up with what I've written in all those posts
Cheers,
/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
|
|
2014-09-20
, 18:35
|
|
Posts: 3,328 |
Thanked: 4,476 times |
Joined on May 2011
@ Poland
|
#1696
|
I'll try when I have a little spare time.
 |
|
2014-09-20
, 18:46
|
|
Posts: 6,447 |
Thanked: 20,981 times |
Joined on Sep 2012
@ UK
|
#1697
|
Originally Posted by marmistrz
What does that "x hours / y days" in the applet mean? In my case x=5, y=6
Originally Posted by Estel
6 days on standby is very optimistic
Estimated time 'till end of battery, active use (usage with the same current as right now, to be precise) / standby.
Originally Posted by Estel
Ah, thanks for that. Quote useful. I've never noticed.
During charging, it's the same, but untill battery gets full.
|
|
2014-09-20
, 20:38
|
|
Posts: 650 |
Thanked: 497 times |
Joined on Oct 2008
@ Ghent, Belgium
|
#1698
|
Originally Posted by pichlo
I actually remember having mine once last a whole week while on holiday, as much stuff was switched off as possible. But not much use except faster to switch into usable mode (compared to switch off completely) </OT>
6 days on standby is very optimistic
__________________
Affordable mobile internet in Belgium: Try Mobile Vikings
2 GB, 1000 SMS and 15 euro of talk time for.... 15 euro
Affordable mobile internet in Belgium: Try Mobile Vikings
2 GB, 1000 SMS and 15 euro of talk time for.... 15 euro
| The Following User Says Thank You to petur For This Useful Post: | ||
|
|
2014-09-21
, 10:50
|
|
Posts: 5,028 |
Thanked: 8,613 times |
Joined on Mar 2011
|
#1699
|
Originally Posted by pichlo
Yea, I think it's overestimated/pulled out of hat, totally. The fun fact is that with 3000 mAh battery, it's also estimating me 6 days on standby, which, as I understand, is the same estimation that people are getting with regular 1300 mAh batteries. So, I would say the latter (pulled out of... hat) is more likely to be correct
6 days on standby is very optimistic
/Edit
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
| The Following User Says Thank You to Estel For This Useful Post: | ||
|
|
2014-09-21
, 12:37
|
|
Posts: 3,328 |
Thanked: 4,476 times |
Joined on May 2011
@ Poland
|
#1700
|
Could the applet show estimated time @current and @average instead? (even by editing the sources and building on one's own)
AFAIK, version in thumb is 1.0-8, so you need to enable cssu-devel, install status-area-applet-battery (it doesn't pull any dependencies from cssu-devel), then disable cssu-devel again. YMMV, so feel free to test 1.0-8 yourself.
/Estel
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!