DrNokSnes (SNES emulator for Maemo 5) - Page 18 - maemo.org

Active Topics

The N900 is now 15 years old! (8)
to Nokia N900 by whayong - 9 hrs, 7 mins ago
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 5 days, 5 hrs ago
more...

Page 18 of 50

Thread Tools

scorpio16v	2010-01-12 , 17:08
Posts: 90 \| Thanked: 29 times \| Joined on Dec 2009	#171

Originally Posted by javispedro

No, you don't.

This version you linked didn't support Zeemote ? And fullscreen mode like in 1.2.5 isn't possible right ?

I've downgraded to this version and can't take access to the zeemote stick.

Quote & Reply |

	msa	2010-01-12 , 17:13
	Posts: 909 \| Thanked: 216 times \| Joined on Nov 2009 @ Bremen, Germany	#172

Originally Posted by stayloa

You don't want zeemote - that's the driver for an actual zeemote (cf. zeemote.com)

You want to get wiicontrol - its also in extras devel. I'm not going to give a disclaimer because you've obviously seen it!

Once you've installed wiicontrol (some people report it asking for python - if it does, install a python editor from maemo extras), you may need to edit the wiicontrol file to change key mappings (or to view them full stop)... Am happy to post instructions of how to do that if needs be.

It involes the lovely sudo gainroot command though!

Once you've got it all installed, make sure bluetooth is on before you start wiicontrol, and you'll need to have started the wiimote searching before you start the prog too. It should then find it.

yeah i found that out too @ wiicontrol xD
i downloaded zeemote thinking its a general program for bluetooth-peripherals instead of a specific program for the actual zeemote-device.

i dont need any phyton-editor though, because mapping buttons works just fine in the drnoksnes-emulator. except for the b-trigger, that it.
and there are no up/down on the dpad, but 2 times left and 2 times right.

anyway, i'd be more interested in making nunchuck and classic controller work!

Quote & Reply |

	javispedro	2010-01-12 , 21:09
	Posts: 2,355 \| Thanked: 5,249 times \| Joined on Jan 2009 @ Barcelona	#173

Originally Posted by scorpio16v

This version you linked didn't support Zeemote ? And fullscreen mode like in 1.2.5 isn't possible right ?

I've downgraded to this version and can't take access to the zeemote stick.

If you want zeemote support use the version on the zeemote thread,
if you don't want zeemote support use the version on my site.
Anything else is a test.

Quote & Reply |

geppo	2010-01-13 , 08:56
Posts: 5 \| Thanked: 0 times \| Joined on Jan 2010	#174

hey guys.. i hope, it is ok to use this thread for my question..
when the n900 was launched back in the end of november, i tried to install drnoksnes via deb file, as the emulators already were taken out of the repositories.

as a complete linux noob, i first tried to install the drknoksnes-dbg 1.2.2 file, which (i think) was not the correct action, so i also installed drnoksnes.deb and everything works..

unfortunately, i am encountering problems while updating to the newer version, as the uninstallation of drnoksnes-dbg is not possible, and i don't know how to solve that, as i could not uninstall it via xterm.

any help would be appreciated pretty much :

Last edited by geppo; 2010-01-13 at 11:53.

Quote & Reply |

phase315	2010-01-13 , 11:36
Posts: 105 \| Thanked: 23 times \| Joined on Nov 2009	#175

Originally Posted by msa

yeah i found that out too @ wiicontrol xD
i downloaded zeemote thinking its a general program for bluetooth-peripherals instead of a specific program for the actual zeemote-device.

i dont need any phyton-editor though, because mapping buttons works just fine in the drnoksnes-emulator. except for the b-trigger, that it.
and there are no up/down on the dpad, but 2 times left and 2 times right.

anyway, i'd be more interested in making nunchuck and classic controller work!

i am also looking for a tutorial on how to make the classic controller work.

Quote & Reply |

orientel	2010-01-15 , 21:03
Posts: 6 \| Thanked: 12 times \| Joined on Nov 2009 @ Rome, Italy	#176

Originally Posted by TooMuchMoney

What a noob I am!!!

Finally managed to get he catalogue working.

"Distribution: fremantle"

I was typing in freemantle and not fremantle

Hope this helps anyone who encountered the same problem.

Thank you, man!!! same mistake here... sometimes noobs are usefull for super-noobs like me :-)

Quote & Reply |

lowrider786	2010-01-16 , 00:13
Posts: 23 \| Thanked: 2 times \| Joined on Nov 2009	#177

hello can someone please post a guide on how to edit the file wiicontrol in /usr/bin/ to make the 1 and 2 buttons work please

so far i have gained access to /usr/bin/ but i dont know what to do next to open the file and edit it please help

Quote & Reply |

orientel	2010-01-16 , 17:45
Posts: 6 \| Thanked: 12 times \| Joined on Nov 2009 @ Rome, Italy	#178

Originally Posted by lowrider786

hello can someone please post a guide on how to edit the file wiicontrol in /usr/bin/ to make the 1 and 2 buttons work please

so far i have gained access to /usr/bin/ but i dont know what to do next to open the file and edit it please help

Here the easiest way to edit files remotelly from your computer using only graphical interface. Just connect to the N900 (via SHH) in 3 steps:

1) In the N900, install "OpenSSH Server" available in Maemo Extra repository (now called maemo.org) and note down password requested during the process:
http://maemo.org/downloads/product/M...penssh-server/

2) Check which is the IP of your N900 installing desktop widget "Personal IP Address":
http://maemo.org/downloads/product/M...al-ip-address/
Of course you can also use xterm command "ifconfig" after getting root access with "sudo gainroot", command requiring "Rootsh" application installed), but widget is easier.

3) From your PC, install WinSCP client and connect to the N900
http://winscp.net/
Use following details for connection:

Host name: IP address checked in step 2
User name: root
Password: the one noted down in step 1
Port number: 22
File protocol: SFTP
Allow SCP: checked

Of course if you have not a windows PC or you don't like WinSCP you can use any other SSH client, e.g. from Linux you will find directly searching in the repository.

Now you can manage your files easilly, e.g. you can jump to "/usr/bin" folder and right click on "wiicontrol" file to edit (I suggest after making a backup copy).

This is the part of code you can edit (e.g. to replace 'space' and 'Return' with other character to change buttons 1 and 2), you will find a similar section for each wiicontrol modality:

Code:

mapping={
    'U': ["a Left"],
    'D': ["a Right"],
    'L': ["a Down"],
    'R': ["a Up"],
    'A': ["k F4"],       # Application menu
    '+': ["k F7"],       # Zoom/volume +
    '-': ["k F8"],       # Zoom/volume -
    '1': ["a space"],       
    '2': ["a Return"],   
    'H': ["k Return"],              # Home button is broken. Do not use it
    'GU': ["a Up"],
    'GD': ["a Down"],
    'GL': ["a Left"],
    'GR': ["a Right"],
    'Z': ["a z"],        
    'C': ["a c"]    
    }

NOTE: However there should be no issue in the original wiicontrol file, I think you simply have a different keyboard layout, do you have full arrows key? If not you can just simulate the full arrow key changing the N900 hardware keyoboard setting to english, or typing following command in the xterminal:

Code:

setxkbmap us

To restore the original keyboard type this:

Code:

setxkbmap xx

(where xx is your layout, e.g. it for italy). See also http://talk.maemo.org/showthread.php?t=36680

Last edited by orientel; 2010-01-16 at 17:48.

Quote & Reply |

The Following 2 Users Say Thank You to orientel For This Useful Post:
F2thaK, g0dzilla

flameboy	2010-01-18 , 12:35
Posts: 63 \| Thanked: 3 times \| Joined on Jan 2010	#179

I have attempted to download this from:

Catalog Name: Maemo Nintendo Emulators
Web Address: http://b-man.xceleo.org/repo/maemo-nintendo-emulators/
Distribution: (Leave Blank)
Components: main

For the SNES Emulator but when I go to download and install it says I need to have

libzeemote
libzeemote-conf

A friend of mine gave me the repo info from the website unlockr and says he didn't have to download these two files. now am guessing these need to come from the Maemo Devel repository? Which I didn't really want to add as am not a expert user and don't wanna risk bricking my phone etc... so what other options are there for getting it downloaded?