Originally Posted by jd4200

Does any one know for a fact whether reflashing/using open-mode voids the warranty or not? I've read many conflicting opinions on this all over the place.

Would it be obvious to Nokia that these modifications has taken place?

Originally Posted by ibrakalifa

try different computer? I have flashed my device many times and always success,

Originally Posted by gaggar

Yesterday my N9 started acting wierd...
suddently it:
lost all signal
camera coudn't launch
restarted by itself.

Once it had sartet up it wrote something like "there is something wrong with your sim-card" /
at other times is says "an error has occured cannot connect to network - Contact Nokia store"

I tried using my simcard in another phone - and it workes fine - so it's not the simcard causing this, i think.

Then i figured that it could be a software problem, så first i tried to:

Restore Settings, do the following:

Open “Settings”
Tap “Reset”
Choose “Restore Settings”
Tap “Yes” to confirm the process.

Still got the message "there is something wrong with your sim-card".

then i tried:

To Clear Device, do the following:

Open “Settings”
Tap “Reset”
Choose “Clear Device”
Tap “Yes” to confirm the process.

still got the same message once starting up.

Finally i tried to flash it following the steps in this guide...i used the """""""Flasher -f -F rootfs.bin -F emmc.bin -R"""""""" thing..

The result was this:




Microsoft Windows XP [version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Programmer\Nokia\Flasher>Flasher -f -F pr1.2.bin -F emmc.bin -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 16238 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_30.2012.07-1_PR_001
Image moslo not present
Image tar skipped
Image config skipped

Battery level 20 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[_] cmt-algo [init 100 % 789 / 789 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2401 kB/s]
[_] rootfs [writing 3 % 39936 / 1163796 kB 8053 kB/s]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[f] cmt-algo [init 0 % 789 / 789 kB NA ]
[-] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2401 kB/s]
[x] rootfs [finished 100 % 1163796 / 1163796 kB 9780 kB/s]
[x] mmc [finished 100 % 1627169 / 1627169 kB 9369 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Timeout while waiting for the HWBREAK
Could not reboot into cold bootmode
[Pipe 6] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Programmer\Nokia\Flasher>


My phone is a black 64GB bought in denmark - product code 059J187

PLEASE HELP.....it's driving CRAZY!!!!

My N9 is not detected when I plug it with the USB cable, so no way to use the flasher. The N9 keeps rebooting when I plug it and force it to turn on with a long press on the power button. If I don't do anything, it will just stay off. In both cases, maemoflasher will not find any suitable device to flash. The USB icon only appears for about one second, but no device detected. After a while and several reboot, I get this warning message stating that too many reboots have occurred, and that the phone should be updated with Nokia Software Updater, or sent to the Nokia Care. (Software problem (xsession/mthemedaemon): too many reboots).

I'm starting to worry now. I'll start to freak out in approximately four minutes.