Active Topics
-
Maemo repository (13)
to Community by nieldk - 18 hrs, 51 mins ago -
Error after installing Leste on sdcard (18)
to Maemo 7 / Leste by Maemish - 2 days, 18 hrs ago -
Maemo 20th Anniversary (4)
to Brainstorm by teroyk - 4 days, 13 hrs ago -
Nokia Booklet 3G (RX-75) Drivers (64)
to Alternatives by teroyk - 4 days, 14 hrs ago -
Porting apps to Leste (46)
to Maemo 7 / Leste by teroyk - 6 days, 17 hrs ago - more...
handaxe |
2011-01-29
, 16:19
|
|
Posts: 1,378 |
Thanked: 1,604 times |
Joined on Jun 2010
@ Göteborg, Sweden
|
#11
|
keep the same kernel but use for eg QCpuFreq to set the speed back to the default.
 |
|
2011-01-30
, 12:40
|
|
Posts: 15 |
Thanked: 0 times |
Joined on Oct 2010
@ Bulgaria
|
#12
|
Originally Posted by handaxe
Nope still nothing ... I noticed that my mirror App don't start too ...Saying some Gstream Error ...
keep the same kernel but use for eg QCpuFreq to set the speed back to the default.
|
|
2011-01-30
, 13:05
|
|
Posts: 446 |
Thanked: 114 times |
Joined on Jan 2010
@ Lake District, Cumbria, UK
|
#13
|
are you using a power kernel? do you use bless or fcam?
if you use fcam try root
apt-get update
apt-get upgrade fcam-drivers
if you use fcam and bless remove bless
if you use titans kernel then there is a fcam driver file that corrects the cam issue.
some more info on your setup and what cam apps you have would help,
if you use fcam try root
apt-get update
apt-get upgrade fcam-drivers
if you use fcam and bless remove bless
if you use titans kernel then there is a fcam driver file that corrects the cam issue.
some more info on your setup and what cam apps you have would help,
|
|
2011-01-30
, 13:11
|
|
Posts: 446 |
Thanked: 114 times |
Joined on Jan 2010
@ Lake District, Cumbria, UK
|
#14
|
and for flashing your phone completly to remove everthing and remove overclocking and get it back to factory settings you need to read how to via this link:
http://wiki.maemo.org/Updating_the_tablet_firmware
http://wiki.maemo.org/Updating_the_tablet_firmware
|
|
2011-01-30
, 19:32
|
|
Posts: 1,378 |
Thanked: 1,604 times |
Joined on Jun 2010
@ Göteborg, Sweden
|
#15
|
@Freak-bg: the steps Neotalk outlined are good but I am confused. You wrote that you reflashed (incl. emmc) and no luck and also mentioned that you o-c (with titan? kernel) but using default freq still made no difference.
Did you test camera after reflashing but before installing the power kernel?
If you follow neotalk's 2nd post and, using an "out of the box" setup, the camera does not work then there is nothing that can be done from a software pov. That USB repair job potentially may be implicated.
You can also try the following in a terminal. Using gstreamer, and with the camera cover open, it should bring up a feed to the n900's screen. If that does not work then refer my comments above....
Did you test camera after reflashing but before installing the power kernel?
If you follow neotalk's 2nd post and, using an "out of the box" setup, the camera does not work then there is nothing that can be done from a software pov. That USB repair job potentially may be implicated.
You can also try the following in a terminal. Using gstreamer, and with the camera cover open, it should bring up a feed to the n900's screen. If that does not work then refer my comments above....
Code:
gst-launch v4l2src ! ffmpegcolorspace ! videoflip method=4 ! autovideosink
|
|
2011-01-31
, 08:04
|
|
Posts: 15 |
Thanked: 0 times |
Joined on Oct 2010
@ Bulgaria
|
#16
|
I was using Bliss before the flashing ... now I am not using any other camera apps 
|
|
2011-01-31
, 08:22
|
|
Posts: 15 |
Thanked: 0 times |
Joined on Oct 2010
@ Bulgaria
|
#18
|
Whit gst-launch v4l2src ... there is the message
Setting Pipeline to PAUSED
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline: pipeline0/GstV4l2Src:v4l2src0: Device '/dev/video0' is not a capture device
|
|
2011-01-31
, 08:26
|
|
Posts: 1,378 |
Thanked: 1,604 times |
Joined on Jun 2010
@ Göteborg, Sweden
|
#19
|
It appears to be a hardware problem.....
The above should stream from the front camera - image is dark so use good light. That probably will not work either as mirror failed for u 2. Back to the repair shop....
Last edited by handaxe; 2011-01-31 at 08:48.
Code:
gst-launch v4l2src device=/dev/video1 ! ffmpegcolorspace ! videoflip method=4 ! autovideosinka
Last edited by handaxe; 2011-01-31 at 08:48.
|
|
2011-01-31
, 22:42
|
|
Posts: 15 |
Thanked: 0 times |
Joined on Oct 2010
@ Bulgaria
|
#20
|
Originally Posted by handaxe
So the phone will go back to the repair shop ... Since I don't have warranty it will be a nice investment for a camera
It appears to be a hardware problem.....
The above should stream from the front camera - image is dark so use good light. That probably will not work either as mirror failed for u 2. Back to the repair shop....Code:gst-launch v4l2src device=/dev/video1 ! ffmpegcolorspace ! videoflip method=4 ! autovideosinka
