Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 6 hrs, 59 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 5 days, 19 hrs ago - more...
| The Following User Says Thank You to avidscavenger For This Useful Post: | ||
|
2011-03-18
, 04:44
|
|
Posts: 195 |
Thanked: 108 times |
Joined on Feb 2010
@ SF Bay Area, United States
|
#212
|
Originally Posted by avidscavenger
It does look ugly but let me try to merge this with qt code.
OK try this for size:
Using the attached code modelled on this: http://ubuntuforums.org/showpost.php...08&postcount=4 I fake the keystrokes to do generate the DTMF codes.
FYI The mappings are: 24=q/1 ... 33=p/0 and 40=d/# You don't have to worry about the modifiers as the dialler converts codes to valid DTMF values. For instance:
dials "03...#" very much faster than the dbus calls.
I haven't figured out how to close the keypad on the screen yet but that's all that's missing to make this a quite usable, if ugly, hack.
__________________
Maintainer of VICaR - Value International Call Router (a helper app for routing calls via calling card/skype-out/google voice)
Maintainer of Markets Today (Yahoo Finance based desktop widget/app)
Maintainer of VICaR - Value International Call Router (a helper app for routing calls via calling card/skype-out/google voice)
Maintainer of Markets Today (Yahoo Finance based desktop widget/app)
|
|
2011-03-28
, 10:39
|
|
Posts: 6 |
Thanked: 0 times |
Joined on Oct 2010
|
#213
|
Originally Posted by scifi.guy
how do you generally dial/enter the international number after calling your calling card number? Some cards ask for "<country code> phone number", some ask for "011<country code>phone number".
So depending on your calling card system's requirement, you need to choose the number format as the "format required for dtmf tone".
The setting "delay before sending dtmf" can be left as 1 for most cases. Increasing this number is required only if the calling card system makes you wait for a long time before entering the phone number.
how can i use calling card in my n900 nokia. I cannot install any dialing software
|
|
2011-03-28
, 17:28
|
|
Posts: 195 |
Thanked: 108 times |
Joined on Feb 2010
@ SF Bay Area, United States
|
#214
|
Originally Posted by farookhmansoor
Hi Farookh - I didn't understand. Do you have trouble installing Vicar from extras-devel?
how can i use calling card in my n900 nokia. I cannot install any dialing software
__________________
Maintainer of VICaR - Value International Call Router (a helper app for routing calls via calling card/skype-out/google voice)
Maintainer of Markets Today (Yahoo Finance based desktop widget/app)
Maintainer of VICaR - Value International Call Router (a helper app for routing calls via calling card/skype-out/google voice)
Maintainer of Markets Today (Yahoo Finance based desktop widget/app)
|
|
2011-06-09
, 09:22
|
|
Posts: 2 |
Thanked: 0 times |
Joined on Jun 2011
|
#215
|
Hi, I'm new here and with Maemo on my N900. I like the application Vicar very much and it's exactly what I'm looking for, but I can't get it running well.
Perhaps this is important: The system is up to date, but I'm using kernel 2.6.28.10-power47
I installed Vicar with the programm manager. The phone numbers are stored in the format as e.g. +49 (170) 27684
I'm using smslisto.com as the card providor.
My setup for "Default profile":
------------------------
Calling card number: <telephone number from providor>
Format required for DTMF tone: 00<Country code><Area code><Phone number>
DTMF tone prefix: p
DTMF tone suffix: #
------------------------
I don't defined another profile, so I can read in Vicar's main window:
No profile found, then call via 911323001
If in adressbook I click "Call via Vicar" this message comes up:
Vicar: +49 (170) 27684 is not a valid number
and nothing happens.
What is my mistake, how can I setup Vicar to dial numbers from my adressbook by phone cards?
In advance thank you very much for any help!
Perhaps this is important: The system is up to date, but I'm using kernel 2.6.28.10-power47
I installed Vicar with the programm manager. The phone numbers are stored in the format as e.g. +49 (170) 27684
I'm using smslisto.com as the card providor.
My setup for "Default profile":
------------------------
Calling card number: <telephone number from providor>
Format required for DTMF tone: 00<Country code><Area code><Phone number>
DTMF tone prefix: p
DTMF tone suffix: #
------------------------
I don't defined another profile, so I can read in Vicar's main window:
No profile found, then call via 911323001
If in adressbook I click "Call via Vicar" this message comes up:
Vicar: +49 (170) 27684 is not a valid number
and nothing happens.
What is my mistake, how can I setup Vicar to dial numbers from my adressbook by phone cards?
In advance thank you very much for any help!
|
|
2011-06-09
, 20:27
|
|
Posts: 195 |
Thanked: 108 times |
Joined on Feb 2010
@ SF Bay Area, United States
|
#216
|
@maemomiguel
Can you please run this command, reproduce the error and send me the output?
Can you please run this command, reproduce the error and send me the output?
Code:
dbus-monitor --session > /home/user/MyDocs/dbus_log.txt
__________________
Maintainer of VICaR - Value International Call Router (a helper app for routing calls via calling card/skype-out/google voice)
Maintainer of Markets Today (Yahoo Finance based desktop widget/app)
Maintainer of VICaR - Value International Call Router (a helper app for routing calls via calling card/skype-out/google voice)
Maintainer of Markets Today (Yahoo Finance based desktop widget/app)
 |
|
2011-07-28
, 21:27
|
|
Posts: 543 |
Thanked: 802 times |
Joined on Apr 2010
@ Germany
|
#217
|
Originally Posted by scifi.guy
Hi scifi.guy!
Originally Posted by avidscavengerIt does look ugly but let me try to merge this with qt code.I haven't figured out how to close the keypad on the screen yet but that's all that's missing to make this a quite usable, if ugly, hack.
Were you able to integrate the code from avidscavenger into your qt application?
The X11 extensions are to much for my weak skills.
I'm currently searching a good solution to send KeyCodes to other applications without using external shell scripts.
__________________
Please DONATE if you like my work!
I was a Qt Ambassador!
WPx Emulator - TcpIpKeyboard - ClipMan - DreamRemote - BashOrgQuotations - Conky Layout Switcher - N900-X-Ray
Please DONATE if you like my work!
It's the best way to motivate me to create more stuff for your Device. 
|
|
2011-07-28
, 21:36
|
|
Posts: 195 |
Thanked: 108 times |
Joined on Feb 2010
@ SF Bay Area, United States
|
#218
|
Originally Posted by helex
Sorry, I didn't have a chance to convert it to Qt.
Hi scifi.guy!
Were you able to integrate the code from avidscavenger into your qt application?
The X11 extensions are to much for my weak skills.
I'm currently searching a good solution to send KeyCodes to other applications without using external shell scripts.
__________________
Maintainer of VICaR - Value International Call Router (a helper app for routing calls via calling card/skype-out/google voice)
Maintainer of Markets Today (Yahoo Finance based desktop widget/app)
Maintainer of VICaR - Value International Call Router (a helper app for routing calls via calling card/skype-out/google voice)
Maintainer of Markets Today (Yahoo Finance based desktop widget/app)
| The Following User Says Thank You to scifi.guy For This Useful Post: | ||
|
|
2011-11-23
, 22:20
|
|
Posts: 2 |
Thanked: 0 times |
Joined on Nov 2009
|
#219
|
Thanks for this excellent app, it made calling so much more easy.
Any chance you planning on getting this ported to N9 as well?
Any chance you planning on getting this ported to N9 as well?
|
|
2011-11-24
, 15:12
|
|
Posts: 195 |
Thanked: 108 times |
Joined on Feb 2010
@ SF Bay Area, United States
|
#220
|
@pavibhai - Thank you. Yes, I am already working on porting it to harmattan. I have few issues to be resolved before I can publish it.
__________________
Maintainer of VICaR - Value International Call Router (a helper app for routing calls via calling card/skype-out/google voice)
Maintainer of Markets Today (Yahoo Finance based desktop widget/app)
Maintainer of VICaR - Value International Call Router (a helper app for routing calls via calling card/skype-out/google voice)
Maintainer of Markets Today (Yahoo Finance based desktop widget/app)
Using the attached code modelled on this: http://ubuntuforums.org/showpost.php...08&postcount=4 I fake the keystrokes to do generate the DTMF codes.
FYI The mappings are: 24=q/1 ... 33=p/0 and 40=d/# You don't have to worry about the modifiers as the dialler converts codes to valid DTMF values. For instance:
I haven't figured out how to close the keypad on the screen yet but that's all that's missing to make this a quite usable, if ugly, hack.