Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 6 hrs, 2 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 5 days, 18 hrs ago - more...
|
2008-01-19
, 04:15
|
|
Posts: 4,030 |
Thanked: 1,633 times |
Joined on Jul 2007
@ nd usa
|
#232
|
"attempt to connect to host computer failed"
Trying to use the remote desktop app to connect the N800 to a winXP profession PC. I can do it under the native system, i.e. Hildon?, I then go into KDE, it connected to the host computer, and give me the menu to type it more info, it then quit and give the above err statement? I get out of KDE and use the rdesktop and it wont connect now. I reboot the N800, and the rdesktop is now able to connect. I have not tried VNC yet.
bun
Trying to use the remote desktop app to connect the N800 to a winXP profession PC. I can do it under the native system, i.e. Hildon?, I then go into KDE, it connected to the host computer, and give me the menu to type it more info, it then quit and give the above err statement? I get out of KDE and use the rdesktop and it wont connect now. I reboot the N800, and the rdesktop is now able to connect. I have not tried VNC yet.
bun
 |
|
2008-01-19
, 05:04
|
|
Posts: 239 |
Thanked: 53 times |
Joined on Jan 2008
@ Massachusetts
|
#233
|
Well, I found a new way to screw the install up.
Freshly flashed N810, installing to internal MMC2.
Files sizes all triple checked.
I put the MMC2 files on a 4 gig card,
stuck it in the MMC1 slot, and tried to install from there.
First file installed fine, made the swap and the image.
Errored out early on the second file.
Log didn't say what it couldn't find.
Your description in the broken installed file, however,
told me something I haven't read anywhere else.
The .BZ2 file has to be on the card you're installing to.
The install was hosed, and the uninstall didn't work.
The internal card was hosed.
Powering up with the USB cable already in beat the locked card problem,
allowing my PC to reformat the borked internal card.
Flash again, copy all four files to MMC2,
and we're off and running.
I've got a good feeling about it this time.
Freshly flashed N810, installing to internal MMC2.
Files sizes all triple checked.
I put the MMC2 files on a 4 gig card,
stuck it in the MMC1 slot, and tried to install from there.
First file installed fine, made the swap and the image.
Errored out early on the second file.
Log didn't say what it couldn't find.
Your description in the broken installed file, however,
told me something I haven't read anywhere else.
The .BZ2 file has to be on the card you're installing to.
The install was hosed, and the uninstall didn't work.
The internal card was hosed.
Powering up with the USB cable already in beat the locked card problem,
allowing my PC to reformat the borked internal card.
Flash again, copy all four files to MMC2,
and we're off and running.
I've got a good feeling about it this time.
__________________
.
.
---------------------------------------------
---------------------------------------------
---------------------------------------------
|
|
2008-01-19
, 20:19
|
|
Posts: 1 |
Thanked: 0 times |
Joined on Jan 2008
@ Buffalo NY
|
#234
|
The instructions do not make it clear that the KDE358.tar file must be named KDE358.tar.bz2! It was downloading to my PC as KDE358.tar.tar which I copied to the sd card at mmc1 on my N810, but when I attempted to install I kept getting an error when trying to install the kde-3.5.8-mmc1.deb file. I tried reflashing and re-downloading but kept getting the same error until I renamed the file to KDE358.tar.bz2 on my mmc1 card. I then got a good install!!
|
|
2008-01-19
, 20:32
|
|
Posts: 239 |
Thanked: 53 times |
Joined on Jan 2008
@ Massachusetts
|
#235
|
Up and running, having a lot of fun poking around.
Extend virtual memory is not checked.
Is the swap something that just KDE uses,
or is it really not enabled?
Also, if you should happen to edit the first post in this thread,
there's still a bunch of invisible yellow text. (another Classic view user)
Originally Posted by penguinbait
In Maemo Control Pane | Memory,
Swap was enabled when you installed KDE. just don't delete swap.img
Extend virtual memory is not checked.
Is the swap something that just KDE uses,
or is it really not enabled?
Also, if you should happen to edit the first post in this thread,
there's still a bunch of invisible yellow text. (another Classic view user)
__________________
.
.
---------------------------------------------
---------------------------------------------
---------------------------------------------
 |
|
2008-01-19
, 20:43
|
|
Posts: 3,096 |
Thanked: 1,525 times |
Joined on Jan 2006
@ Michigan, USA
|
#236
|
Originally Posted by dubwise
Up and running, having a lot of fun poking around.
In Maemo Control Pane | Memory,
Extend virtual memory is not checked.
Is the swap something that just KDE uses,
or is it really not enabled?
Also, if you should happen to edit the first post in this thread,
there's still a bunch of invisible yellow text. (another Classic view user)
The swap is enabled but not through control-panel
In xterm, do
NOKIA:/ ROOT#free
total used free shared buffers
Mem: 126828 117596 9232 0 208
Swap: 131064 100 130964
Total: 257892 117696 140196
NOKIA:/ ROOT#
__________________
To all my Maemo friends. I will no longer be monitoring any of my threads here on a regular basis. I am no longer supporting anything I did under maemo at maemo.org. If you need some help with something you can reach me at tablethacker.com or www.facebook.com/penguinbait. I have disabled my PM's here, and removed myself from Council email and Community mailing list. There has been some fun times, see you around.
To all my Maemo friends. I will no longer be monitoring any of my threads here on a regular basis. I am no longer supporting anything I did under maemo at maemo.org. If you need some help with something you can reach me at tablethacker.com or www.facebook.com/penguinbait. I have disabled my PM's here, and removed myself from Council email and Community mailing list. There has been some fun times, see you around.
| The Following User Says Thank You to penguinbait For This Useful Post: | ||
|
|
2008-01-19
, 20:59
|
|
Posts: 239 |
Thanked: 53 times |
Joined on Jan 2008
@ Massachusetts
|
#237
|
Originally Posted by TheAlchemist
I'm glad you figured it out. Pretty cool, this learning stuff.
The instructions do not make it clear that the KDE358.tar file must be named KDE358.tar.bz2! It was downloading to my PC as KDE358.tar.tar
Vista, right? That's mentioned a couple of times in this thread alone.
http://www.internettablettalk.com/fo...4&postcount=39
The files are also explicitly named many places along with the admonition to check the file sizes.
Perhaps it's not clear that the entire thread is the instructions.
Numerous issues have come up and been answered here.
__________________
.
.
---------------------------------------------
---------------------------------------------
---------------------------------------------
Last edited by dubwise; 2008-01-19 at 21:12.
|
|
2008-01-20
, 13:33
|
|
Posts: 2 |
Thanked: 1 time |
Joined on Jan 2008
|
#238
|
First off -- thanks to penguinbait and and everybody else that fills this forum with quality info. This device would be pretty dull without all their impressive hacking.
If, for some reason, you get a Cannot install package when attempting to install the kde-3.5.8-mmcX.deb package, you probably won't be able to uninstall or install it again. Several people have had to reflash the device.
The above happened to me last night. The reason, as I found out, Windows XP automatically renamed the .tar.bz2 file to .tar.tar (so, this renaming doesn't just happen on Vista. Unfortunately, I didn't realize it had happened until I attempted install of the second package, and got the failed install). Multiple attempts at re-installing/removing/updating were unsuccessful... The only recourse was to exit into terminal and do the following (you probably have to be root):
rm /var/lib/dpkg/info/kde-mmc*
dpkg --remove --force-depends --force-remove-reinstreq kde-mmcX
This uninstalls the package. You can now attempt install of kde-mmcX again.
If, for some reason, you get a Cannot install package when attempting to install the kde-3.5.8-mmcX.deb package, you probably won't be able to uninstall or install it again. Several people have had to reflash the device.
The above happened to me last night. The reason, as I found out, Windows XP automatically renamed the .tar.bz2 file to .tar.tar (so, this renaming doesn't just happen on Vista. Unfortunately, I didn't realize it had happened until I attempted install of the second package, and got the failed install). Multiple attempts at re-installing/removing/updating were unsuccessful... The only recourse was to exit into terminal and do the following (you probably have to be root):
rm /var/lib/dpkg/info/kde-mmc*
dpkg --remove --force-depends --force-remove-reinstreq kde-mmcX
This uninstalls the package. You can now attempt install of kde-mmcX again.
| The Following User Says Thank You to ITalic For This Useful Post: | ||
|
|
2008-01-20
, 14:03
|
|
Posts: 34 |
Thanked: 15 times |
Joined on Nov 2007
@ NJ, USA
|
#239
|
Make sure the tar.tar file is renamed after you download it. Renaming beforehand resulted in a very small file being downloaded. (260kb or so). And yes, this happens to XP Pro and Home as well as Vista.
 |
|
2008-01-20
, 14:47
|
|
Posts: 538 |
Thanked: 168 times |
Joined on Dec 2007
@ Seattle
|
#240
|
Originally Posted by penguinbait
I'm a little confused - how is the 128MB of swap enabled if not through Maemo Control Panel? Are you saying that you've added something to the KDE install to automagically enable 128MB of swap for KDE? If so does this mean I can turn it off in Maemo (since I hardly use Maemo anyways)? Or is my set up going to be different because I'm dual booting?
The swap is enabled but not through control-panel
In xterm, do
NOKIA:/ ROOT#free
total used free shared buffers
Mem: 126828 117596 9232 0 208
Swap: 131064 100 130964
Total: 257892 117696 140196
NOKIA:/ ROOT#
Also, you can get all of the memory/CPU usage details in KMenu -> System -> KSysGuard (I couldn't get your xterm NOKIA:/ command to work). FWIW, I've used KSysGuard a lot in my experiments to attempt to find the optimal KDE set up for me.
__________________
When you wish upon a star, your dreams really can come true... Unless it's an asteroid hurtling towards earth that will destroy all life.
When you wish upon a star, your dreams really can come true... Unless it's an asteroid hurtling towards earth that will destroy all life.
Congrats!!!
To all my Maemo friends. I will no longer be monitoring any of my threads here on a regular basis. I am no longer supporting anything I did under maemo at maemo.org. If you need some help with something you can reach me at tablethacker.com or www.facebook.com/penguinbait. I have disabled my PM's here, and removed myself from Council email and Community mailing list. There has been some fun times, see you around.